CURRENT USA Dual Adjustable Aquarium Light Arm Mount Kit: Illuminate Your Aquatic Environment

Chris CritesChris Crites: I needed a way to raise my Fluval 3.0 plant light into the air because the 6500k light was melting my floaters. After reading some reviews and trying to find anyone who had found a way to mount this particular light I just went for it. These mounting arms are perfect with the addition of buying the “Fluval Suspension Bracket” ($5) on Etsy. Overall I’m extremely happy with my purchase. These arms fit my 10 gallon (pictured) and also fit my rimmed 55 gallon but barely. I will say the plastic screws are a bit difficult to screw on and you will need a screw driver and some forearm strength.

TL:DR/ Fluval Plant 3.0 light plus Etsy bracket = problem solved

United States on Sep 12, 2023

Uriel Mancilla Basilio: Muy buen producto y materiales de calidad.

Mexico on May 11, 2023

Nan Adams: These light mounts look nice and streamline in pictures, but the design was underwhelming. I have the 36-48” Current USA Orbit IC Pro lights on a 48” long tank, but the extending legs are flimsy and cause the lights to sag in the middle and rest on the tank cover. I thought I’d solve the problem by mounting the lights. Nope. My tank is 18” front to back, so even with the lights pushed to the front of the mount, they were too far back for my taste and created an ugly shadow effect in the front of the tank. Plus, they aren’t very sturdy and seem like they’d be better suited to support only one light strip. I wish Current offered a better clamp-style design like other brands use. Luckily, the return process was easy.

Canada on Aug 06, 2022

Stewart MckayStewart Mckay: This is a great support to keep your light fixture above the water

Canada on Jul 11, 2022

Ron D'Arcy: This is a great, well made bracket. Easy to install and adjust. I made the mistake of thinking it will fit any led lamp bar, and ordered it for my JC&P led lamp. My lamp was too wide for the lamp clips. I could not think of a modification to make it fit, and had to return it. I recommend buying this bracket, but only for the led lamps they say its for.

Canada on May 30, 2021

Amazon CustomerAmazon Customer: Likes: First off I have to state that Amazon shipped it quickly and the product I received was in perfect condition. Now on to the product itself. Out of the boxes it was well packaged and came with extra hardware that I didnt need but was good to have just in case. The adjustment screws are plastic as everyone else has stated but the construction was pretty solid. I was able to loosen and tighten with ease and made sure to use adequate pressure so as not to strip them. Key note, I do have a rimmed tank and at first I thought it was not going to fit, but after angeling it a little I was able to squeeze it onto the rim so with that being said, it is a very tight fit and very slightly bends the rim a little but not to the point that I am worried about damaging it. I have a 75 gallon tank and the lights I have are pretty long, so I went with two brackets instead of one. This was the right choice, so i am not worried about sagging lights. As you can see in the picture, they line up almost perfectly and do present a slim profile. Also the fact that everything is adjustable, means that I can possible use it for future tanks but the brackets fit mine perfectly and does not hang over the...

United States on May 04, 2019

Liana Robertson: Beware, there are two types of these light supports. One supports only one light (good for narrower tanks) and one for holding two lights, or one further out toward the center of the tank.

I had to return the one I bought here and go shop for the XL model in town, but I do own two of them and can say I'm very pleased with their functionality.

Or tank is a 24 wide... Get the XL model for anything wider than about 18 inches ( front to back) or your lighting will fall on the back of the tank and not the center of your tank. The XL also comes with the ability to hold two different lights and you can adjust the width of the bracket even with two lights, so you can reach across the top of a 36 in tank and get a reasonable amount of light throughout.

For each model, there are two plastic bricks with two sided tape to help you apply this to a rimmed tank, you can skip them on a rimless tank. You might apply them on a rimless acrylic tank just to avoid screw marks.

You get three set heights for the light, to set it higher off the tank or closer to the tank. The height is up to about 5 inches on my setup, but could vary based on the configuration of your...

United States on Apr 23, 2019

Stephen A.Stephen A.: Very good solution to elevate Current USA light strip(s). Provides stability and completely adjustable. I use two to hold a 48" Satellite Plus Pro over a 5 foot long 100 gallon tank. Brackets fit over the tank nylon frame without issue. I may add a second light strip and the mounts should hold both with ease although there is some shakiness in the arms themselves with the weight of the strips. No big deal unless bumped. These also make for easier access to tank lid removal since the light is elevated. This particular tank is built into a wall opening and the arm length stops just short of hitting the back wall. I'm happy with this kit and really recommend it as opposed to just sitting the light strip on top of the tank.

Canada on Sep 01, 2018