Leathercraft CLC 5021 Impact Driver Holster: Durable, Customizable Protection for Your Tools

C. Hull: I probably have well over a dozen Mikita 18v tools. But they are a heavy things for regular around the house tasks. Now when I have to drill a pilot hole and drive a screw I put on two of these holsters and carry my drill and driver. Together they weigh less than one of my Makita drill/drivers. It is so much handier to have these holsters. Wish I had found them a few years ago

United States on Sep 05, 2023

nicknick: Been putting my impact an drill on my side of my bags qn been messing up my back so I I figure why not give one of these things a shot an it’s been one day an I am pretty pumped on this thing an I don’t got this extra weight on the side of my bags deff a 5 stars love the clip hold my m18 just fine drill an impact

United States on Aug 11, 2023

Bob Tobias: The media could not be loaded.  I bought the  BOSCH CLPK27-120 12V Max 2-Tool Combo Kit , and this holster holds either the PS21 Drill/Driver or the PS41 Impact driver perfectly. And the two elastic loops and two tiny pockets are great for holding drill bits or driver bits that are at least a couple of inches long.

The one thing I wish is that instead of having a sewn-in belt loop, it had either one that used velcro to fasten the loop or had a belt clip. That would make it easier to slip on and off.

United States on Aug 01, 2023

Natanaeel: Resistente, se adapta fácil a casi cualquier cinturón y fácil de limpiar, la e usado por año y medio, se ve entera de buen color

Mexico on Jan 15, 2023

Jaime Arreola Rojas: Ene 2023. Jaime de CDMX, EXCELENTE. lo comparé con productos similares me pareció el precio justo pero ahora que lo uso es excelente, lo recomiendo defintivamente.

Mexico on Jan 13, 2023

CJ1000: Awesome Holster, I like how it's not any larger than it has to be, and seems sturdy and well made. My only complaint is that I really liked the elastic pockets on the front, but the fact that they are "pockets" and not simply elastic straps, they end up being super shallow, and not as useful to put drill bits and stuff in, as I had hoped!! I might seem rip the stitches at the bottom of the elastic "pocket" so that bits can be pushed deeper. Overall though, great holster!!

Canada on Mar 03, 2021

LJ: As another reviewer mentioned, this fits my Bosch snub nose 12v impact driver (ps42) perfectly - like a glove, like it was actually made for the unit. Really, it's a hard to describe how oddly satisfing it is to drop it into this holster. It just drops in and seems to lock in place - cool. Do it again. Cool... That said it does not fit my Milwaukee 12v fuel impact driver (Jury's still out on which one I like better) as well. It fits, just not as well. It doesn't lock into the hoster when you drop it in. This is because the Bosch's head is a bit wider and the handle angle is a bit more 90 degrees than the Milwaukee's.
The holster is also quite compact (good) and minimal. Given the size it's only appropriate for 12v or smaller impact/drills/screwdrivers. Would be nice if it had a couple extra features to it, like some of my drill holsters have. It really is quite minimal. Wanted to give it 4/5 stars for this (given the price) but the fit feels sooo cool for my Bosch I have to give it 5.
PS I don't like the word "cool" but that's the voice of my inner child talking in my head when I drop the Bosch into the holster.

Canada on Jun 29, 2017

Flandry: I wanted a holster to use with the  Milwaukee 2453-22 M12 FUEL 1/4" Hex Impact Driver Kit  because i frequently wear some type of tool belt while i'm using it and there's no room on the belt for the built-in belt clip. I was considering this holster, a different model by Custom Leathercraft, and the one Milwaukee offers. I went with this one because it was smaller and if i'm wearing a toolbelt i don't need more than just a place to put the driver itself.

So how does it work? It's okay... the m12 fuel impact driver fits well in the holster. If anything, the holster could be even smaller/more minimal. It seems pretty secure, even without the velcro strap. Speaking of the velcro strap, it does tend to get in the way in the "ready" position, so i found the best thing was to just let it drop down inside because i never use it. The angle is okay. The open bottom makes it possible to slip the driver into the holster even with long spade bits on it (however, see below). The holster's belt loop is big enough to accommodate most tool belt webbing.

There are two real complaints to report. The first is that the somewhat soft fabric inside the holster does tend to snag...

United States on Aug 16, 2015

Daiwamaster: Bought it for $11,90 CAD a few weeks ago, used it for my PS130, PS21 and PS41, all fits well, although the PS41 is a cleaner fit with the slightly bigger body, the PS21 needs to be pushed all the way down to make it snug so it won't move down after and the PS130 hammer drill nicely slip right in with his thinner body. The end is open so of course you can holsters the tool with a 6" bit cleanly. The holding straps for bits could be taller and could use a few more too, considering you'll use mostly 2" bits and such. I'm right handed, but wear this holder to my left, because it is easier to reach without having to get my elbow up to my shoulder, but the angled holster makes it clumsy to pull out the driver without having to hold the holster down a little. I saw other cheaper holsters which had little to no angle so they could be worn either side and also had a pouch to carry a spare battery which would be ideal to have on this holster. Otherwise, build quality and fit are great, will do the job holding your driver securely and doesn't bounce around much. Fits a 2" belt easily. It's the same as Kuny's SG5021 holder you can find in local Canadian hardware stores.

Not perfect,...

Canada on Apr 08, 2015

CoD511: One of the best purchases I made towards my small 12V Ryobi Drill Driver in its history with me; this holster is of a functional design and fits its purpose along with some extra bits for your drill or driver.

Having this holster when working and needing to frequently switch between tools is a godsend, it makes life so much easier than finding a spot to place your drill/driver and is a bargain at the price and for the quality. My Ryobi 12V fits like this holster was designed specifically for it and not a massive range of drill drivers and impact drivers; it's a very snug fit for it, very secure and held in by an easily detached strap that can be hooked onto velcro after unclipping to allow easy re-holster after a piece of work. SImply pull off and clip in. I was worried about the clips plastic, but its much sturdier than expected and made out of tough, thick and rigid plastic. I can't see it wearing down quickly at all and a replacement holster would end up cheaper at the value offerred here. One small complaint is that a belt must be looped through it prior, not too annoying and very secure to your person. To me, it feels very natural to have.

Considering the...

United States on Sep 25, 2013