KES Shower System with Tub Spout and Bath Shower Faucet for a Luxurious Showering Experience

Sara Durham: A few months back, my contractor updated my bathroom and I chose these fixtures. In the plus side, they look fantastic in the satin finish and are versatile. The only issue is that the shower head water pressure is limited, due to the overhead 10” extension.

United States on Dec 21, 2023

LedaLeda: Super elegant and very functional specially the faucet when filling the tub.

United States on Dec 06, 2023

Kully: I bought the brushed nickel shower and it was easy to install. The shower arm was leaking immediately after install, I contacted customer service who were exceptional. I sent a video of the problem and they sent me a replacement arm which was installed with no leaking. Great product and even greater customer service. Will definitely recommend KES products.

Canada on Nov 25, 2023

Mike: Relatively straight forward to install, good quality, and looks great!

Canada on Oct 16, 2023

Annie Auclair: installation demandant adaptateur mâle. Il faut mettre assez de teflon et bien serrer sinon il y a des fuites.
A part cela l'ensemble est super. Tout fonctionne bien. C'est très beau dans la salle de bain.

Canada on Sep 16, 2023

kayykayy: Love the waterfall and rainfall on this! Wanted something more modern for me remodeled bathroom. Only thing is the water pressure for the shower head and handle isn’t that strong. I don’t know, maybe something to do with my pipes and not the fixtures themselves!

United States on Jun 27, 2023

Trevor L.: Easy to install nice setup

Canada on Dec 28, 2022

mickmick: Redoing the bathroom as I write this. Only 1 bath in the house so have to do the remodel in sections. I've been a contractor for nearly 30years. Recently installed a similar name brand fixture from a umbing supply house that cost $1500. This KES unit stands up to the name brand if not exceeds.

1st: I read the reviews and the complaints, saw that some of the fitting on the fixture may be smaller than typical fittings. What I did to make sure this didn't happen was I put pipe dope on first than a layer of teflon tape.
2nd: I read the directions. They are limited, but looking at the diagram they show exactly how all the measurements for the placement should be laid out and installed.
3rd: I pressure tested the valve first woth caps. Then I proceeded to pipe the fixtures then pressure tested each on at the rough in stage. Then, pressure tested the whole system before I closed in the walls.

The unit looks really sharp, it's been in for a week. No water hammer issues as I've read about. I prob wouldnt put this in a 2nd bath on a 2nd floor for thay reason. Better safe than sorry there. However, I am extremely impressed by how the unit was packaged....

United States on Apr 19, 2022

HernanHernan: The media could not be loaded.  I was hesitant about ordering this shower controls because of the amount of negative reviews about fittings leaking and the difficult installation due to the accessories being male fittings. I have installed controls with male fittings before and knew I had to leave the female fitting coming from the wall flush with the face of the tile to work properly (see pic) Once you figure the finish tile surface installing the shower control rough in is just as any other. After that my only concern were the reviews about faulty accessories leaking from the factory side. Fortunately I had none of that.
Installation of the finishes was quick and easy, no leaks.

Canada on Mar 04, 2022

MAAUF-IA: I feel like this is really high quality especially for the money and when compared to the major brands which aren't nearly as stylish. Only issue was lack of detail on some of the setbacks in the instructions led to me having to get some additional fittings. Used lots of teflon tape and thread sealant and had no leak issues at all. Also had to buy a separate chrome trim piece to go between the tub spout and the wall - it came with one for the shower and the handle and with the trickiness of getting the depth just right for the spout fittings I had a gap - relatively easy fix though. UPDATE AFTER ONE YEAR - main issue is the pressure is not good on this fixture. Other fixtures in the house don't have this issue - water barely pours out of the tub spout and I believe it's due to the blockage inside the main unit - look inside the connection holes and you'll see theres a lot of blockage from poor casting - so your 1/2" water feed turns into about 1/4" which restricts your water supply. Problem is I can't find any other brands that offer a setup like this without the wand connecting into the shower which I don't like without spending north of $1G.

United States on May 06, 2021