By: Freeman
The Freeman PFWS Pneumatic 20-Gauge 9/16" Fine Wire Stapler is the perfect tool for any project. This ergonomic and lightweight nail gun features a no mar tip to prevent scratches and dents on the work surface. Its body is ergonomically designed and comes with a 360 degree adjustable exhaust for comfortable use. Additionally, its lightweight body makes it easy to handle and use. This stapler is the best choice for projects such as screens, upholstery, and crafts due to its build quality, easy to use, overall performance, and size. CS: We're used this long enough to make a fair assessment.... hard pass. Within a week of using it, staples starting binding in the muzzle of the gun, requiring the entire muzzle to be disassembled to unbind the staples.
I prefer the feel of this pneumatic stapler to the Arrow, but the Arrow pneumatic stapler is a lot more reliable.
United States on Jul 08, 2023
Ferdinand23: Cumple para trabajos pequeños ya que quise usarla por tiempo prolongado y se empieza a querer encasquillar y tenemos que acomodar las grapas pero para trabajos pequeños donde no se le exige mucho Bien
Mexico on Jun 30, 2023
MATSMAN NEWFIE: Great product works flawlessly. Very lightweight and compact.
Swivel air chuck would have been a good addition.
Canada on Jun 28, 2023
Jorge Pacheco: El producto me parece excelente, buena presentación e imágen. Lo único y muy importante es que las grapas no son fácil de conseguir.
Mexico on Jun 25, 2023
Ram750: Me encanto ya hice un par de arboles de juego para gatos con ella y me encanto, funcional y facil de usar solo usa una gotita de su aceite antes de usar si la guardaste más de un mes y listo a trabajar
Mexico on Jun 13, 2023
Abinadab: Llego a tiempo, todo funciona correctamente, nada que reclamar exelente producto.
Mexico on Jan 21, 2023
S Eckert: The rubber safety tip, as others have mentioned, is big enough to obscure exactly where you're going to staple. But that's not why I'm returning it! The safety tip ALSO bottoms out before the opening of the stapler reaches the work, so a small tilt can raise or lower the body and change the drive depth quite a bit. Would you hold a staple gun 1/16" off the surface and fire it?
The manual says adjusting the air pressure alone may be enough to set drive depth, but I called and verified there is no OTHER way to set depth. (The good news is that a native english speaker answered the phone and knew what he was talking about.) That method can't lead to predictable depths because even at 70psi it buries staples below the surface of standard pine studs. Unless you hit the edge of a knot. To get predictable depth, you need an excess of force and a hard stop on the hammer. Not with this tool.
United States on Jan 19, 2022
CMac -Amazon Addict!: This is and has been a life saver for me! I was in the middle of a very in-depth upholstering project and was using an electric staple gun made by Stanley. And while that one was getting me by, I really needed more power. The problem was, I didn't want to spend a fortune on a staple gun that I probably would not be using very often after I'm finished with my projects at home.
The good points about this gun is of course it's price. Secondly is that it has a safety button that needs to be depressed onto the face of your project to release the staple.
The bad part about this gun is that very same safety button. I'll explain why.
The "nose" on this gun is VERY short. Not so short that you can't get into areas, but short enough that if you NEED to get into tight narrow areas, the gun will not fire. This becomes difficult when you really need to get into tight areas, but it isn't enough for me to say don't buy this gun. I'd buy it over and over again, as opposed to trying to use that electric gun on my projects. It has saved my sanity for sure!
United States on Mar 09, 2016
DW: I had been looking for a pneumatic wire stapler for some time and saw this one at a local merchant. I ended up buying it through Amazon at a lower price. I've now fired about 3000 staples and can provide some experience. Out of the box, I found that on 1/4 inch staples, it would set the staple too deep in soft wood. Turning down the air pressure corrected this, but then the pressure was inadequate to reset the driver blade and a misfire would result. I ended up using longer staples than necessary to get the correct depth at a pressure that would reset the driver blade.
The unit comes with a belt hook that must be attached by removing one of the fasteners and replacing it with a longer one packed with the belt hook. The fastener was too large to fit - not a big deal, but certainly an inconvenience.
Misfires are uncommon - about 1 or 2 per hundred staples. Otherwise, it performs well. It's light enough that it is not tiring to use. Overall, I would
recommend. It certainly beats my old manual staple gun.
United States on Jan 29, 2015
Freeman 9/16" Ergonomic and Lightweight Pneumatic 20 Gauge Fine Wire Stapler Nail Gun | Bostitch Office EZ Squeeze 20 Sheet Standard 3-Hole Punch - Effortless Punching for Your Documents | M12 3/8" Crown Stapler from Milwaukee - 2447-20 | |
---|---|---|---|
B2B Rating |
96
|
97
|
97
|
Sale off | $1 OFF | $47 OFF | |
Total Reviews | 234 reviews | 63 reviews | 200 reviews |
Number of Fasteners | 100 | 1500 | |
Domestic Shipping | Item can be shipped within U.S. | ||
Measurement System | Imperial | ||
Item Dimensions LxWxH | 9 x 2 x 6.75 inches | 9.25 x 8.05 x 3.4 inches | |
Best Sellers Rank | #357,400 in Tools & Home Improvement #154 in Hand Staplers & Tackers | #384,720 in Office Products #1,050 in Desk Staplers | #11,940 in Tools & Home Improvement #6 in Hand Staplers & Tackers |
Part Number | PFWS | 2447-20 | |
Batteries Required? | No | No | |
Is Discontinued By Manufacturer | No | No | |
Item model number | PFWS | 2447-20 | |
Brand | Freeman | Bostitch Office | Milwaukee |
Manufacturer | Prime Global Products | No | |
Power Source | Air Powered | battery-powered | |
Product Dimensions | 9 x 2 x 6.75 inches | 9.25 x 8.05 x 3.4 inches | |
Number Of Pieces | 1 | ||
International Shipping | This item can be shipped to select countries outside of the U.S. Learn More | ||
Date First Available | December 4, 2011 | July 18, 2022 | December 6, 2017 |
Color | Black | Black | Red&black |
Number of Handles | 1 | ||
Item Weight | 2.2 pounds | 3 pounds | |
Style | Adjustable, Ergonomic | Traditional, Compact,Ergonomic,Replacement | |
Material | One piece hardened steel drive blade, and anodized aluminum magazine and cylinder | Silver, Metal | Alloy Steel, Plastic |
Customer Reviews | 4.4/5 stars of 560 ratings | 5.0/5 stars of 10 ratings | 4.7/5 stars of 2,069 ratings |
Warranty Description | 7 Year Limited Warranty and 90 Day Wearable Parts Warranty | ||
Item Package Quantity | 1 | 1 | |
Capacity Description | Full Strip | Full Strip | |
Batteries Included? | No | No | |
ASIN | B006ARJX0A | B0B6VFV2FC | B077YV5SLJ |
Included Components | Pneumatic 20-Gauge 9/16" Fine Wire Stapler; Belt Hook | staple gun | |
Country of Origin | China |
Paul Tiernan: Good bang for your buck
United States on Aug 19, 2023