XS Sights 3-Dot Tritium Night Sight Set for Improved Visibility in Low Light Conditions

guydiverguydiver: Installed on a Glock 26. Really like the front sight picture now. USA made by a good company too. You will need a rear sight press though. That sucker is TIGHT going in.

United States on Nov 18, 2023

sjemerysjemery: Installed easy. I wanted to stick with the regular sights for my CCW and I’m happy I picked these up. The orange really catches your eye and picks up quickly, just a fast as my red dots. Seems to be made of good, quality materials, much better than the stock Glock sights.

United States on Nov 13, 2023

Prison MikePrison Mike: I upgraded my sights about a year ago to Trijicons, which were Okay, great at night but way too tall. These are just above the factory, and just below the others and man do they glow. As others have said, use a digital caliper to get the rear sight center, on my G19 gen 4 its 21.5mm on both sides. and the front was 10.8mm on both side on the "back" side (what you see).

Using the included thread locker and a good quality sight tool, you can get this installed within minutes, I even cleaned my slide again because why not, a clean gun is a happy gun.. What I was not expecting was the company to include oil, let alone the stuff I use. I love the Lucus extreme oil, and this is the first company that included gun oil for any accessories I have purchased for any pew pew. I might just be upgrading all of my hand boom sticks to this company.

When doing drills with it, the front sight catches your eye right away, and lines up perfectly with the rear with the contrasting orange against black. If you're coming from the stock sights, you will fall in love. I like basicish for my everyday carries, and this is just perfect. Definitely recommend.

United States on Nov 06, 2023

PURDUE98: Purchased to replace the suppressor height night sights I previously installed for a REFLEX sight.
EDC doesn't really require the REFLEX sight and I didn't want to install the original sights back onto the platform.
Brightness is just about perfect for my eyesight.
When the funds become available, I am going to purchase another set for an additional weapon that does have a REFLEX sight.
Package was complete with everything you need.
I did remove material from the base using 200 grit and 500 grit sand paper to prefit the rear sight.
Install was simple.
Will take to the range soon and then do any rear sight adjustments as needed.
Great product.

United States on Oct 16, 2023

Jason: Perfect fit for a Glock 43X. To be honest, I'm not big on night sights (rely on a flashlight in the dark), but these were priced right compared to other metal sights. I'm glad I made this purchase, because I see the value in these in daylight/low light conditions.

Just pay careful attention to the install instructions, and you'll be fine. I have a vise, but found it easier to install the rear sight laying the slide on the side, on a hard surface (I have ceramic tile in my kitchen/bathrooms/utility room), and tapping in using a nylon punch and a ball pein hammer. I used painters tape and shop towels to protect the finish on the slide while removing/installing the rear sight. It was a tight fit, but if you place the point of the punch on the base of the sights, it drives the rear sight home. Just be patient, and be careful.

I recommend using a caliper to align the rear sight. I also marked the rear site groove on a piece of painters tape placed on the top of the slide, in front of the rear sight to give me a visual alignment cue. Low tech, but very effective.

The front sight is simple to install, just follow the instructions and be careful not to over-tighten...

United States on Mar 03, 2023