Topeak Road Morph G Mini Bicycle Pump - Compact and Lightweight Design for On-the-Go Inflation

Ricardo A.: Este artículo ya lo he adquirido en otras ocasiones. Ante un pinchazo en carretera, con esta mini bomba de pie puedes inflar fácil y garantizar la presión requerida, 90 ó 116 psi o etc.

United States on Sep 12, 2023

Adam: I'm really impressed with this pump. It is a bit large for a mini pump that is meant to be carried on a bike but it's not too large. It is totally worth it when you actually have to inflate a tire, which can be a nightmare with mini pumps. I tested this thing out and was easily able to pump my 700Cx35mm tire. The fact that it has a tube with the valve and you can put it on the ground to pump makes it so much better. You can't go wrong with this pump. If you are concerned with the size, you can get the mini-morph.

United States on Aug 31, 2023

Katie C.: I am a NICA Certified High School Mountain Bike Coach, and I change more tubes than I would like on the trail. This pump is the BEST I’ve used by far, for a portable trail pump! I 10/10 recommend. I have already bought an extra one as a gift and recommend it to our other coaches.

United States on Aug 31, 2023

Steve Wallace: The first time I used this pump was on a recent vacation. I planned on buying a cheap thrift store bike. I saw one I really liked but it had two flats and one valve stem was inaccessible inside the tire. So I got the valve stem squared away and pumped both tires to 50 psi. After 15 minutes they were still holding pressure so I bought the bike and rode away on it. The pump worked really well when I sat down and braced the bottom against my leg and did a pulling motion using my biceps. I noticed no difference in air flow between this pump and my normal floor pump. The little lock / release lever works in the exact opposite manner of my floor pump. So that had to be kept in mind.

United States on Aug 22, 2023

Mark: Hervorragende Pumpe für alle, die etwas mehr Luftvolumen benötigen, als es Minipumpen liefern aber unterwegs keinen Platz für eine Standpumpe haben. Im Verhältnis zu ihrem geringen Gewicht von 250g ist die Pumpe hinreichend solide und sehr ordentlich verarbeitet. Der klapp- und arretierbare Griff, ein klappbarer Standfuß sowie die Klemm-Aufnahme für das Schlauchende sorgen dafür, dass die TOPEAK Mountain Morph sich trotz einer Länge von 35 cm im Gepäck (oder an der mitgelieferten Rahmenhalterung) schlank macht und nichts herumklappert. Der kurze Schlauch reicht aus, wenn das Fahrrad auf dem Boden steht und das Ventil sich unten befindet.

Wer regelmäßig unterschiedliche Ventil-Typen zu versorgen hat, eher hohen Druck als Volumen benötigt oder eine Pumpe für's kleine Reparaturtäschchen sucht, der wird mit diesem Modell eher nicht glücklich. Dafür habe ich sie aber nicht ausgesucht, weshalb es hier von meiner Seite keinen Grund für Punktabzug gibt. (In meinem kleinen Pannen-Set befindet sich eine TOPEAK "Racerocket MT" und in unserer Garage pumpt eine TOPEAK "Joeblow Mountain X" das ganz große Volumen. Die TOPEAK "Mountain Morph" begleitet uns auf...

Germany on Aug 07, 2023

Daniel Jutras: Portatif.

Canada on Apr 13, 2023

Cesar comunidad Olea: excelente producto, muy práctico y ligero!

Mexico on Feb 21, 2023

Ezequiel: Yo hago rutas en bici de montaña y me sirve muy bien, ya que cabe muy bien en mi mochila, no pesa mucho y no tardo mucho para inflar mi llantas. Obviamente es para emergencias, no para uso diario.
Si quieres para uso diario pues es mejor comprar una bomba más grande.

Mexico on Jan 24, 2023

VancityS4: I have a Mini Morph for my road bike and it has never let me down, but it lacks volume for gravel/MTB tires. This pump solves that. I love the "mini track pump" design of these pumps. The ability to pump with one end against the ground instead of having to hold with two hands makes pumping FAR easier, especially as presssures rise.

Canada on Oct 28, 2022

Theysaid: Got my pump today. I am a technician. I love instructions finding none was disappointing. I found a small picture on the card board backing that it was shipped on showing how to change the connector to fit a Shrader valve. It was just a tiny photo and hard to find. Therefore I wrote my own set of INSTRUCTIONS for those who may appreciate my effort.. You may cut, past, and post them any where you see fit.. Make corrections if need be..Edit if that helps..

Turn the Yellow side of the card board away from you..The gray side with the black stripe on the left should be facing you..Just below the yellow label, on the left edge that states "T handle" you will see the photos which ARE the instructions..The lever MUST be DOWN to put on the valve head at this time..THIS IS IMPORTANT..

There is a small black plastic ring shown just above the two white things which vaguely resemble both the Schrader and the Presta valves..This black ring comes off then end of the assembly by turning it counter clockwise..Once it's completely off simply take the black plastic device out of the air pump connector (it connects to the valve stem) keeping the lever DOWN on the air connector.. The...

United States on Nov 19, 2011