By: Sunex Tools
The Sunex 6602LP 2 Ton Low Rider Steel Service Jack from Sunex Tools is the perfect choice for convenience, overall performance, build quality, and value for money. With a maximum height of 24 inches, this floor jack is ideal for pick-ups and SUVs. Its versatile design makes it suitable for use with various cars. Additionally, the dual pump feature offers quick and accurate height adjustment.James West: I bought this to use with my 2001 & 2020 corvettes. I needed something very low profile that would work well with jacking pucks. Sunex screams quality, very well made easy to move and I don't worry that I'll damage my cars with a cheap jack. You get what you pay for and it's well worth the price.
United States on Aug 09, 2023
Henry Jorge: Works perfectly and it's an excellent jack. Heavy duty, I have no complaints.
United States on Jun 21, 2023
Clayton B.: The Jack is nice and quality seems good, it’s smooth although we haven’t lifted a car yet the jacks lowest setting is 3” when it’s advertised as a 2.75”, the reason we bought it.
Also disappointed there is no rubber saddle like most jacks in this price range have.
Canada on May 19, 2023
Martin Quesnel: 100% satisfait, rabais incroyable pour boîte endommagée, 400$ d’économie. Meilleur jack j’ai essayé dans ma vie
Canada on Apr 29, 2023
Derek: My best friend since I got it. I have a quite low car and absolutely needed a long range low jack like this. 4 stars just because of the price which is a bit high but still worth it if you need a low jack. minimum height is 2.75'' and has a long range to be able to jack from the middle of the car(differential, sub-frame).
Canada on May 06, 2020
Mugwump: Arrived today. Box and jack in perfect condition. No structural or cosmetic flaws. Very heavy but rolls smoothly. Be careful removing the wire which holds the pistons in and yoke down for shipping. No hints in instructions on how to remove it safely (I cut it with a die grinder with a cutting wheel but from behind with the mechanism pointing at a wall and wearing a full face safety shield in case they were held in with more force than I expected...it wasn't). Clear process in manual and online to remove any trapped air. Rolls easily and the handle and mechanism works smoothly. .
I measured the minimum position at more than 2 3/4", which is a bit disappointing. it was almost 3" ( 2 15/16) across the tops of the "tabs" on the saddle, and identical to my old jack. While it might be a bit lower between the tabs that is an unrealistic measurement as it is the tabs which will make the contact with the lift point on the vehicle. The maximum lift was higher than spec at 24 5/8". The low rise section, measured from the center of the saddle, was 16".
I tested operation on a light car (1220 pounds) in my shop and it took leass effort than my old jack. It also worked smoothly...
United States on Dec 21, 2019
Client d'Amazon: Bonne qualité
Canada on Aug 19, 2019
howard colp: I bought many floor jacks over the years . But this is by far the best one
Canada on Feb 28, 2018
welder314: This is a very good quality jack. It is made in China, but it does not look or feel cheap. You can see this in the detail, for example the set screw for the handle uses a large diameter thread and it's lathe turned on the end. The quick-disconnect button on the handle is thick steel and is solid. Not that it affects function, but the paint is smooth, no drips or runs, and there were no sharp edges or poor quality stampings. All the welds looked good. This is not the same one that looks identical and sold by the store with initials H.F.; I've had hand-on experience with that one and I can say that it IS cheap. This does not reek with the odor of cheap tools either (I know the smell doesn't matter but you know how everything at H.F. smells...).
To me this is not a heavy jack, in fact it seems about on par with most similar sized steel jacks. When it arrived (on a pallet), I just opened the box and lifted it out. I guess it depends on what you are used to. It rolls easily even on my somewhat rough and sloped (5 degree) driveway. It doesn't get hung up any more than my other shorter jacks; it does sit low, and of course will drag on concrete boundaries, etc. Obviously if you're...
United States on Oct 18, 2016
Sunex 2 Ton Low Rider Steel Service Jack with 6602LP Model | Arcan 3-Ton Quick-Lifting Aluminum Floor Jack for Easy Automotive Repairs | Blackhawk B6350 3.5 Ton Fast Lift Service Jack - Black and Red | |
---|---|---|---|
B2B Rating |
97
|
97
|
94
|
Sale off | $168 OFF | $40 OFF | |
Total Reviews | 118 reviews | 683 reviews | 675 reviews |
Style | Service Jack | 3 Ton Aluminum | Jack |
Maximum Lifting Height | 24 Inches | 18 Inches | 4 Inches |
Country of Origin | China | China | China |
Manufacturer | No | Arcan | Blackhawk |
Item Dimensions LxWxH | 36 x 15.75 x 7.5 inches | 30 x 13.5 x 8 inches | 28.5 x 13.75 x 6.5 inches |
Best Sellers Rank | #72,462 in Automotive #168 in Floor Jacks | #63,451 in Automotive #146 in Floor Jacks | #25,136 in Automotive #67 in Floor Jacks |
Date First Available | June 17, 2014 | January 7, 2012 | June 7, 2011 |
Customer Reviews | 4.7/5 stars of 321 ratings | 4.6/5 stars of 1,870 ratings | 4.6/5 stars of 4,545 ratings |
ASIN | B00L1ZCN0I | B0047D2FWM | B0054WGRBA |
Brand | Sunex Tools | ARCAN | Blackhawk |
Item Weight99 Pounds | Minimum Height2.75 Inches | ||
Manufacturer Part Number | 6602LP | B6350 | |
Is Discontinued By Manufacturer | No | No | |
Product Dimensions | 36 x 15.75 x 7.5 inches | 30 x 13.5 x 8 inches | 28.5 x 13.75 x 6.5 inches |
Model | 6602LP | B6350 | |
Vehicle Service TypeCar | MaterialMetal | MaterialAluminum | |
Item Weight | 99 pounds | Minimum Height11.62 Inches | 85 pounds |
Item model number | 6602LP | A20018_A20019 | B6350 |
Load Capacity | 2 tons | 6000 pound | 3.5 tons |
KCJP: Solid, great height and extreme low profile. Very heavy though as expected.
United States on Sep 26, 2023