By: Powerbuilt
Powerbuilt's 3 Ton All-in-One Hydraulic Bottle Jack and Jackstand is the perfect solution for your Automotive needs. This compact unit has a wide base and an 11-21 inch range, eliminating the need for jackstands. It is designed for use on unibody trucks, SUVs, RVs, cars, trailers and more, and meets ASME - 620471 standards. With Powerbuilt, you get the best Floor Jacks on the market, based on convenience, overall performance, build quality and value for money. Get your 3 Ton All-in-One Hydraulic Bottle Jack and Jackstand today!believeInReviewsbelieveInReviews: It is useful but does not work with my sports car which has a 7" clearance. I only have one jack point in front of my vehicle. In order to slide the jack under my car, I have to first jack it up and place a piece of wood under the tire to clear the 7". However, in order to gain height, I have to first extend the extension piece all the way up, slide the jack under my car and then start pumping. I cannot do that of course since I only have a 7" clearance. In order to do so, I have to place at least a foot thick piece of wood under my tire. The scenario is nicely explained in the HowToDoItDude "Powerbuilt Unijack 4000 review" YouTube video.
United States on Sep 28, 2023
dennis l jaworski: I use this when I’m traveling with my RV.
Perfect size, works great.
Already loaned it out to another RV friend. After using it he ordered one for himself.
United States on Sep 26, 2023
Tommy: Perfect 🤩
With my Prius on the black widow ramps ( yup Amazon)
This give me the height to add extra safety,as I use the front (of car) lifting spot Toyota has for its cars
My floor Jack doesn’t have the height for this spot
Next oil change I’ll measure and get the two smaller ones for the standard side lifting spot for tire change ( behind the front wheels)
3 spots for safety.✅✅✅
United States on Sep 19, 2023
Gabo: Esta perfecto para mis necesidades por que mi camioneta es grande pero no funcionaria para autos pequeños
Mexico on Sep 08, 2023
VVBulldog: I have had to use this on my last two wheeling trips and it was awesome. This last trip I cut a sidewall so the tire went down fast and to the rim. It was so low I couldn't get this jack under the axle so I used my hi-lift to raise the Jeep a little and then used this jack to complete the tire swap. I love the wide base and the locking jack stand. I was on fairly level land but the wide base and lock were nice things to have doing the job. It has become a fixture in my Jeep and will remain part of my loadout. I actually have two of these and the first has lived in my truck for years. My truck has larger tires making the stock jack useless so I got this for the same reasons I listed above. Thankfully I have not needed that one much but it is certainly nice to have.
United States on Sep 02, 2023
WildCard: As advertised
Canada on Sep 01, 2023
Sylvie: Bon article
Canada on Jul 21, 2023
GVenk: This is designed to work in place of a jack stand, a bottle jack or a floor jack offering something in addition to each of those. Unfortunately, this has limitations in each of the applications where you would have used those especially for automotive purposes.
Like the rest of automotive industry that hasn't standardized on jack points, this unit has its own saddle design that is neither like a jack stand nor a floor jack nor a bottle jack. So, none of the third party pad adapters you can get for any of those will work. The pad offered by Powerbuilt itself doesn't fit the 2ton (4000lb) version despite the representation it does.
So, you land up improvising the usual hockey puck or wood block or whatever to interface which makes the minimum height of this unit even more of a problem and less sturdy. The bent angles on the "stand" saddle will dig into things in the car it shouldn't otherwise without spreading the load.
For most small cars, the minimum height is too high for use on the sides as might be needed for a tire change or a brake job. So, one will need to initially lift the vehicle with something else (what one might be trying to avoid in the first...
United States on Jul 15, 2023
James: The jack initially appears to be very well built. I have just purchased the unit and have not used it on a vehicle yet.
Before I purchased the unijack I did a lot of checking on the lift dimensions as there seemed to be much discrepancy in the reviews. The box says that the jack is 11 inches tall at the minimum height. YES, that is the true dimension. I had replies to my question of from 11 to 12 inches. I am not sure where people were measuring.
The information also states that the jack has a range of 11 to 21 inches. Again, this is true, but this wide range is only achieved by raising the jack support section. With the jack support in the lowest pin level, the jack is at 11 inches. With the jack support in the highest pin position the jack is at 15 inches.
The most important piece of information that is missing anywhere is the stroke length of the bottle jack. One gentlemen was very kind to reply to my inquiry about the stoke length with the CORRECT and EXACT measurement. The STROKE LENGTH of the bottle jack is 6.5 inches. For my case, with the clearance that I have to place the jack under my 2016 Jeep Cherokee, I have to start the jack at its minimum height...
Canada on Oct 11, 2018
Powerbuilt 3 Ton All-in-One Hydraulic Bottle Jack and Jackstand Combo Unit | Sunex 2 Ton Low Rider Steel Service Jack with 6602LP Model | Arcan 3-Ton Quick-Lifting Aluminum Floor Jack for Easy Automotive Repairs | |
---|---|---|---|
B2B Rating |
83
|
97
|
97
|
Sale off | $47 OFF | $168 OFF | |
Total Reviews | 310 reviews | 118 reviews | 683 reviews |
Country of Origin | China | China | China |
Load Capacity | 3 ton | 2 tons | 6000 pound |
Vehicle Service TypeTruck | MaterialMetallic-Fiber | ||
Is Discontinued By Manufacturer | No | No | |
Brand | Powerbuilt | Sunex Tools | ARCAN |
Customer Reviews | 4.5/5 stars of 3,483 ratings | 4.7/5 stars of 321 ratings | 4.6/5 stars of 1,870 ratings |
Date First Available | November 7, 2013 | June 17, 2014 | January 7, 2012 |
International Shipping | This item can be shipped to select countries outside of the U.S. Learn More | ||
Manufacturer Part Number | 620471 | 6602LP | |
Product Dimensions | 9.88 x 9.75 x 11.5 inches | 36 x 15.75 x 7.5 inches | 30 x 13.5 x 8 inches |
Manufacturer | Alltrade Tools LLC | No | Arcan |
Model | 620471 | 6602LP | |
Item Weight22.66 Pounds | Minimum Height11 Inches | ||
Style | Jack | Service Jack | 3 Ton Aluminum |
Domestic Shipping | Item can be shipped within U.S. | ||
Item Dimensions LxWxH | 9.88 x 9.75 x 11.5 inches | 36 x 15.75 x 7.5 inches | 30 x 13.5 x 8 inches |
Item Weight | 22.7 pounds | 99 pounds | Minimum Height11.62 Inches |
Item model number | 620471 | 6602LP | A20018_A20019 |
ASIN | B00GJJZ5NI | B00L1ZCN0I | B0047D2FWM |
Best Sellers Rank | #1,912 in Automotive #2 in Floor Jacks | #72,462 in Automotive #168 in Floor Jacks | #63,451 in Automotive #146 in Floor Jacks |
Maximum Lifting Height | 21 Inches | 24 Inches | 18 Inches |
Color | Black | Green |
Danny V.: Todo bien. Lo único que no me gusta es que llego con la caja toda mojada del aceite que derramo...
Mexico on Oct 05, 2023