By: StrongTools
The StrongTools Red or Green BoreSighter is the perfect tool for hunters looking for accuracy, battery life, and build quality. This kit features a press switch design that makes it easy to turn ON/OFF the light, and its simple design makes it incredibly easy to use. Constructed with high-quality modules and qualified electronic components, this boresighter provides a longer and more consistent lifetime than other models. With an 800mAh battery, you can be sure your hunting trips will be successful!Neufeld: It works as it should easy to use , had a minor issue resolved immediately .
Canada on Oct 26, 2023
greg edwards: Super easy to set up and use i used it for my pellet gun and its dead on. Good Quality product and well-built. Well worth the money and I recommend it
Canada on Oct 25, 2023
SmaccSmacc: Simple to use. .30-30 Marlin freehand at 50 yards. First two shots were just left of bullseye. Couple clicks to right and dead center. Only issue is instead of being multi-colored, all the adapters were black making it difficult to identify the correct one I needed. The green laser is bright even in bright daylight.
United States on Oct 23, 2023
Robert H.: It's a lot brighter than the red Lazer not disappointed at all like it a lot
United States on Sep 30, 2023
Donna Pennell: I wish I would have looked a little longer, after ordering I found one that would have suited my application better.
Canada on Sep 27, 2023
Dave d.: It's hard to read the sizes, and be careful with the expansion tabs, they break easily
Canada on Sep 01, 2023
Lflatilla: I almost passed on this item due to the reviews stating that it was not accurate. I resisted basing my decision not to buy on these reviews as I believe people do not follow directions or read instructions. Some people stated that the adapters were not marked. Wrong!....... they did not read the directions. They are all marked. The smaller ones do not have a number but an ingenious way of marking them to be easily identified.
The item is very well made of an aluminum alloy. The included instructions could not be clearer. By carefully following the directions, I was able to easily zero all my rifles and handguns. The critical part to ensure accuracy is to snug up the adapters evenly to the muzzles of the weapons. One can accomplish this by slowly rotating the adapter until it is centered and snugged up to the muzzle. As you slowly rotate the adapter you observe the wobble of the dot. At the point where there is little or no wobble and the adapter is snugged up to the muzzle...you have a centered laser dot! Accuracy is now pretty well guaranteed.
I am very pleased with this purchase. Great value at this price level. In my opinion, the results match very closely to the...
United States on Aug 05, 2023
Jean l.: Insérer dans le canon et tourner le lazer le point change de place? Donc pas d'une très grande précision mais c'est proche.
Il faut quand même finaliser avec la bonne vieille méthode! Un bon appuis et une cible.
Canada on Mar 02, 2023
Norman S: I recently bought, reviewed, and returned the LaserLyte competitive product. I knew what kind of tool I wanted and bought the most expensive version of it in the belief that it would be the "best".
After returning the LaserLyte, I decided to try again with the Strong Tools boresighter in green. The price was approximately half that of the LaserLyte. In comparison:
1. Strong Tools boresighter comes in a nice plastic case that closes tightly and has a properly fitting place for each component of the kit. LaserLyte comes in a fragile foam sleeve with no place to keep anything.
2. The instructions for Strong Tools, while containing grammatical and typographical errors, are clear, and there is an explanation not only how to set the sighter up, but also how to use it. LaserLyte was incoherent with illustrations that were useless, and with no advice on how to use the tool.
3 The Strong Tools sighter has an on-off switch. The only way to turn the LaserLyte off is to remove the three fiddly little batteries, which are prone to falling out of the uncovered recess anyway. Also, Strong Tools uses one single battery (and comes with a spare).
4. Both the...
United States on Mar 01, 2021
StrongTools Red & Green BoreSighter 177 to 12GA Caliber Rifle Scope & Handgun Hunting Red/Green Dot Boresight Kit with 800mAh Battery and Press Switch Feature | Professional Grade Green Laser Boresighter by SiteLite Ultra Mag | MidTen 12-Gauge Chamber Bore Sight Red Dot Boresighter | |
---|---|---|---|
B2B Rating |
93
|
96
|
96
|
Sale off | $9 OFF | $1 OFF | |
Total Reviews | 525 reviews | 25 reviews | 246 reviews |
Compatible Devices | Handgun, Rifle | Handgun, Shotgun, Rifle | Handgun, Rifle |
Package Weight | 0.2 Kilograms | 0.5 Kilograms | 0.16 Kilograms |
Magnification Minimum | 1 x, 2 x | 3 x | |
Date First Available | June 24, 2018 | March 22, 2011 | January 3, 2019 |
Warranty Description | NO | ||
Manufacturer | StrongTools | Site Lite | yawan |
Objective Lens Diameter | 15 Millimeters | ||
Mounting Type | Picatinny Mount | Picatinny Mount | |
Size | Universal | ||
Included Components | NO | ||
Model Name | 1-5 | ||
Brand | StrongTools | SiteLite | MidTen |
Material | Aluminum | Brass | |
Customer Reviews | 4.4/5 stars of 6,843 ratings | 4.6/5 stars of 647 ratings | 4.7/5 stars of 3,690 ratings |
Item Dimensions LxWxH | 1.38 x 7.87 x 1.38 inches | 9 x 2 x 6.5 inches | 1.97 x 3.15 x 1.18 inches |
Sport | Hunting | Hunting | Hunting |
Item Package Dimensions L x W x H | 7.95 x 3.23 x 1.34 inches | 8.74 x 5.75 x 2.17 inches | 3.1 x 2 x 1.1 inches |
Color | green laser | Red | Tan |
Item Weight | 1.65 Ounces | 16 Ounces | 0.05 Kilograms |
Brand Name | StrongTools | SiteLite | MidTen |
ASIN | B07DZ5BYFG | B002QG76B2 | B07MS8TQRM |
Style | Bore Sight | Boresighter | Red Laser |
Night vision | No | No | No |
Best Sellers Rank | #1,007 in Sports & Outdoors #5 in Hunting Boresighters | #16,544 in Sports & Outdoors #51 in Hunting Boresighters | #7,294 in Sports & Outdoors #21 in Hunting Boresighters |
Suggested Users | unisex-adult |
Roger: Used to sight in red dot on my lever action
United States on Oct 28, 2023