SimPure Whole House Water Filter Housing: Inline Water Filtration System for Home and RV Use

Kurt W.: I installed a 3 stage whole house water filter system. These worked perfectly, are great quality, and with the pressure relief valve it is super easy to change filters. I am very pleased with my purchase. No leaks so it's a no brainer in my book!

United States on Dec 12, 2023

ChandlerChandler: It’s a good product noticed imitate change is water quality. There’s a few grips but nothing crazy

1 water shoots out of pressure release valve.
2 no mounting screw for bracket. You will need wood screws and a washer. Also will have to build a support in wall as too big for single stud.
3 no filters with kit.
Small but things that get all added several thousands of dollars in property value due to decreased wear on appliances.

United States on Dec 05, 2023

Larry : Returned one for slight drip second one drips also. Sealing ring or canister is to blame dont know which. I just put a plastic can under it to catch the drip which only happens when water is running tru it

United States on Nov 14, 2023

Jacob Clifton: This filter works well for the money, good buy.

United States on Oct 29, 2023

BuilderBros: This was a simple install (I have done a couple similar ones before).
You do need to properly evaluate the pipe diameter..it is best to slect a filter housing with larger diameter in/out fittings than your pipe size (i.e. 1" input and output from the filter housing with 3/4" house plumbing). You will use a 1" -to-3/4" MIP male adapter..it is easiest to use a combination MIP & push-to-connect fitting (i.e. "Shark Bite")made just for this...it has brass male threads (1") and a 3/4" female push-to-connect fitting to connect to your house plumbing (copper, CPVC or PEX). Recommend putting a quarter turn valve in your piping before and after the filter to make filer cartridge changes easier. Make sure you mount the housing bracket securely as it takes a lot of force to remove and install the filter cannister (the blue part). Turning/torquing the blue part does strain your mounting hardware so fasten securely to an adjacent wall (solid framing/blocking) or a masonry wall (using Tapcon screws or similar).
Measure your clearances accurately below the unit to allow for the blue housing to be removed with the filter cartridge. (It's nice if you have room to...

United States on Apr 12, 2023

Carlton BlueboyCarlton Blueboy: Seems to be a nice unit. Was simple to install. inclusion of some mounting screws would have been a nice touch. I installed it to filter bore water for my pool, so the install is a bit rough on my part but the unit seems to do the trick. Nice clean water coming through and no leaks from the housing. The ‘O’ ring is a little flimsy and could be more robust. Given the price it’s a pretty good unit. I am happy with it.

Australia on Dec 15, 2022