Rollerblade VXT500 Inline Skate Wheels

Megan Davis: These fit PERFECTLY on the Radio Flyer Tail Spin

United States on Oct 05, 2023

Walt: These worked great on a suitcase that looked new except for bad wheels. I made sure of the size by measuring the old wheels first.
these are better than new!

United States on Aug 09, 2023

Donald Van Raalte: Used this to replace a broken wheel on my son's Razor RipStick. Works perfectly. Spacers were just right.

United States on Jul 20, 2023

Michael ZimmermannMichael Zimmermann: As a tour guide, my trusty rolling cooler gets use 3-5 days a week, and the original cheap plastic wheels were not up to the job. Once the skimpy rubber coating worn off, they went from noisy to REALLY noisy and they transferred a lot of vibration up to my arm, which made long pulls a real pain.

These wheels turned out to be perfect replacements. They are quiet, smooth-rolling, and were easy to install. The toughest part of fitting them was finding replacement cap nuts for the ends of the axle as the originals had to be pretty-much destroyed to get the old wheels off.

I can’t vouch for their effectiveness as rollerblade wheels; but, if their performance on my cooler is any measure, they should be great for that too!

United States on Jul 10, 2023

Sergio Villa Ramos: Se usaron en una maleta TravelPro, excelente calidad y precio. Valeros dobles (los espaciadores se tienen que usar de las ruedas anteriores) tare unos espaciadores presumo para patines.

Mexico on Apr 19, 2023

Bachan: Las puse como reemplazo de las ruedas de transporte a una Bicicleta Brompton. Funcionaron perfectamente bien. Mejor que las Brompton originales.

Mexico on Mar 12, 2023

Amazon Customer: Good wheels, and the bearings are good/sealed. I put these red wheels on my Swiss Gear (2-wheeled) 19" Roller Bag. Note- if you are going to attempt this, be forewarned it is definitely doable, but is a bigger pain than anticipated. The rivets in the running gear DID NOT drill out, they spun. I had to Dremel tool with cutoff wheel to cut them out. Then, I used all stainless hardware and made new axles w 1/4x2" bolt. Used an ink pen body as a spacer/bushing to adapt the 1/4 bolt to 8mm inner bore of the bearing. Used 1/4 jam nuts to secure wheels with blue loctite on the nuts. Replaced all cut out rivets with all SS hardware. It looks great, and now I don't have to buy one of those ridiculous 4-wheeled bags, which seem to be the only ones you can find.... You're going to need a drill, bits, wrenches, and possibly a Dremel, but hey, you're keeping stuff out of landfills, and you will turn heads at the airport.

United States on Jan 30, 2023

Uriel Cano RodriguezUriel Cano Rodriguez: Compre estas ruedas para sustituir las de una maleta de viaje que se dañaron con el uso. Se ven de buen material y fueron de fácil instalación.

Mexico on Mar 28, 2022