Litex WCI-100 Wall Command Universal Remote Control for Ceiling Fans

Zerazull: Works great for my 2006 Hunter Fan. Similar button layout but improved smartly. No stupid battery required in the button box like the current Hunter branded options require. If you are an Old Fan company why screw your customers over and waste money and resources on battery's! Very poor Hunter / Litex whoever they are. Good thing this was available.

United States on Jul 20, 2023

M C: These work great and if you have other remotes that have DIP switches, it will learn those too. The wall unit has 5 DIP switches, the 5th ust turns dimming on and off. The only thing to keep in mind is if you are installing more than one of these on the sane breaker, make sure all of them are switched off at the wall unit except the one you are programming. If not, then as soon as the breaker is turned on, they will all be in learning mode and all will set to the one remote.

I bought these and some hand held remote separately to go with them and no problems at all.

United States on Jul 10, 2023

J. Fix: This wall switch replacement for the cheap remote controls that the ceiling fan manufacturers supply works like a CHAMP. It completely removes the battery element from the equation, so your connectivity never drops to your fan and you can control all functions from the wall (fan speed, dimmable lighting). My only complaint about the unit is that the remote that installs in the fan mount is just *slightly* bigger than the remote unit that was in my fan. I had to take down the entire fan and modify the "ball" support from the fan stem to shorten it, to provide room for the new remote unit to slide in. Once I did that, the remote unit fit and the thing works great.

United States on Feb 24, 2023

Tova-Jesse: At the top of my stairway to my second floor I had a plain light fixture that was served by 3-way switches (one at the bottom of the stairs, one at the top of the stairs, and one just outside the Master Bedroom).
I decided to replace the light fixture with a fan/light combination to improve air circulation between floors. I didn't want to have to control both fan and light with these 3 way switches so I decided to see if these would work...and they do!! It was a bummer to need to order 3 complete kits because I needed 3 transmitters but 1 receiver, but the experiment worked and I have extra receivers.
What's nice about these kits is that the receiver doesn't have DIP switches on them- you set the transmitter(s) to whatever code you choose (make sure you set them all to the same code). It's also cool that you don't need to tap into the white wire in the switch box, just connect the transmitter to each of the black wires in the box, doesn't matter which is which, and connect the ground wire to ground of the switch box.
First I switched off the circuit breaker powering that circuit.
Next I removed all of the existing wall switches and then disconnected the red wire from...

United States on Jan 05, 2021

Jerry: I had one of the older wall units (model UC-9050) that looks just like this one but was made by Harbor Breeze. It worked flawlessly for the past 17 years but the off button had to be pressed really hard to turn off the fan from the wall unit. So I sought to replace it with like for like but there were a number of reviews out there made it difficult to determine if would still work due to the learning function of the receiver. Bottom line, just set the first 4 dip switches to match and the fifth dip to off or 'X'. Unfortunately, the instructions and the manufactures specs don't let you know if it's backwards compatible which is unfortunately as I've seen a number of reviews stating they returned it. That said, there was a review posted on her by Jason Allen on in March of 2014 that really help explain the whole deal. I'm re-posting his review in the hopes it helps others who don't go through all 100+ reviews to find it. You can also find his review in the Q&A if you search for 'frequency'. Here it is again:

ByJason Allenon March 28, 2014
This is in respsonse to some people that said it didn't work with an old receiver:

I currently have three Hampton Bay fans...

United States on Jul 30, 2018