Heavy-Duty Universal Garage Door Bottom Seals with U Shape and O Ring Combination

Parzerot: I am happy with the installed mount and seal. I looked at the lower surface of the door before I ordered and saw about 2" wide. Unfortunately, when I removed the existing aluminum mount for the single channel seal, turned out the bottom of my door was stepped making for two different surfaces. I was able to rip 1" wide 3/16" wood strips from an old wood packing box to make for one level surface. Used the end of a leftover tube of Lexel sealant to "glue" the wood strips, then the aluminum rails over them. Then, as suggested in another review, used 3/4" #10 stainless steel self tapping screws. (Bolt Dropper 10 x 3/4" Hex Washer Head Self Drilling Screws | 410 Stainless Steel Self Tapping Tek Screws | No. 3 Point, Plain Finish | 100 pcs Hex Head Self Tapping Screws | Corrosion Resistant). In hindsight, I would use 1" long self tapping screws because you have to somewhat fast to drill before the self tap goes through the thin bottom of the door and it is easy to strip the newly formed threads. I tried to just get the threads made, then tighten with a plastic handled nut driver, but did strip two or three. The longer screws are only needed if you need shims like my wood strips. I left...

United States on Nov 27, 2023

Kristy K.: This was a little difficult to get on but works perfectly. Better than replacing the garage door

United States on Nov 25, 2023

H. Macarthur: After 20 years the original bottom seal assembly rusted and was falling off. This is a perfect upgrade. Easy to install. Just placed an order to do the other two garage doors.

United States on Nov 08, 2023

Richard R: I truly like the ease of installation. The directions are not super clear where the metal starts and stops, after getting a couple of things over the course of an hour, I came up with a game plan that worked.

One other thing to keep in mind, the greatest invention in the world is self drilling screws. They did not come with my package and I was doing a new install on an old garage door. I went to town and got some and making sure the groves lined up, everything went together total time about two good hours.

I thought it was going to take a lot longer, but I was happy!

United States on Nov 05, 2023

Julia a: We had to replace the old rubber seal on our garage doors cause a previous owner cut the ends. No idea why. But the space was just big enough for mice to get in. Yuck! So after buying the rubber stripping from Home Depot and not getting it to work with our time worn metal base, we bought this. Replaced the metal and rubber and it’s a perfect seal with the ground. So happy with it. Been working great for the past month since we installed it. If you get this, definitely buy some silicone spray to grease the metal track. It makes sliding in the rubber much easier. Also, it took two of us to do it, one to push and one to pull. Otherwise it would just pop out with one person trying to do it on their own. It also creates a nice clean line when you look at the garage. Highly recommend.

United States on Oct 17, 2023