14-inch Nickel Plated-Steel Ball Bearing Drawer Slides by Amazon Basics - 1 Pair

ConcordLady: These environmentally friendly refills fit many of the pens I've acquired over the years and work just like the original. Can be trimmed up to about 3/4" if necessary. Highly recommend.

United States on Apr 17, 2023

Francescangeli Maurizio: Usate per grandi cassetti.
Ottimo scorrimento.

Italy on Oct 20, 2022

Giuseppe: Il funzionamento è più che adeguato, c'è anche un pratico meccanismo per sganciare il cassetto in ogni momento. Bisogna solo avere molta cura di posizionare le guide esattamente nei punti giusti altrimenti il cassetto non scorre, ma ciò non dipende dal prodotto in sè.

Italy on Aug 16, 2022

Luck Guy: While these drawer slides are not the standard I would use on a $3000.00 desk they are great for kitchen canbinets and other desks. Like most cabinet drawer slides don't bother with the instructions (poorly written & complicated) instead use the Kreg Drawer Slide Jig and watch the youtube video on how to use them. Well worth the money.

Canada on Feb 22, 2022

Noel: Installed with new custom drawers. You need to be quite accurate on the dimensions. I preferred the drawer slide with a slight resistance so it doesn't slam in when closing

Canada on Feb 10, 2022

george meredith: I made some home made trays to fit in some storage shelving so I could pull them out and easily look at the contents of the shelves. Especially handy for trays holding 50 or more cans of spray paint so easy to find the right color. Also handy for a quick look over jars of screws and nails to pick the right size. These drawer slides are so strong I cannot overload the shelves. The ball bearings allow one finger operation no matter how full. They are absolutely excellent and outstanding value.

Canada on Sep 24, 2021

yetanotheryetanother: My mirror cabinet drawers (16 inches depth) are pretty heavy but came installed with bottom-mounted drawer slides that are flimsy and make it harder to open/close the drawers when filled up with stuff. Eventually, these slides bent permanently, and it was dangerous to operate a couple of drawers that ended up in a precarious position.

I found these 14 inches ball bearing drawer slides on Amazon. Not being a handy person in general, I was hesitant but decided to purchase two sets to replace couple of ill-positioned drawers in the cabinet. The instructions and illustrations are pretty clear. The confusing parts that were not made apparent by the manual:
1. How do I horizontally position the slides on the drawers?
It may be obvious to others, and I finally realized that the slides must be flush with the back of the drawer's front cover.
2. There are multiple screw holes on the slides, so which ones should I choose?
I decided to choose the smallest holes. There were a few holes that were not necessarily smaller. For holes that were rectangular shaped with semi-circular ends, I chose the holes with the vertically longer side, and positioned the screw on the top part...

United States on Dec 18, 2020

SoMECustomer: Pros: dimensioned well, so installation planning is easy; once installed, seem to work well

Cons: bearing plate in middle slide piece doesn't mate well with drawer side pieces; screws included do not fit holes very well, leaving screw head proud (does not catch on the slides though); likely not a good choice if you need to take the drawer out on a regular basis.

I purchased a five pack for drawers in a table saw cabinet I'm building. The slides installed easy enough; the dimensions were spot on making cutting the drawer pieces easy. The first drawer slid in easily enough the first time. The second time I had to install the drawer, however, it was a different story.

Somehow the drawer side slide caught the edge of the ball bearing holders in the case side piece, bending the metal upward. I pulled the drawer back out and tried to readjust the metal piece down. The second time through the same thing happened on the other side.

I moved onto a different smaller drawer, thinking perhaps it was more of my fault. After pulling this drawer out to finish reattaching the drawer slide, the same thing happened trying to put it in. This time, I recognized the problem...

United States on Aug 10, 2020

JK: Price: Much better than price than other drawer slides ($50-$75 is too much).

Quality: After comparing these slides vs the slides that came with my cabinet, these were a little stiffer (they will loosen a little with time) and less smooth. It is a noticeable but not important difference. These are Grade B slides, but I like them.

Ease: These slides were user-friendly. Loved the release levers. The directions were partially helpful.

Suggestions:

1. Tools - Directions recommend phillips screwdriver, tape measure, pencil and level. All helped. Also consider a small drill/electric screwdriver (for inside the cabinet work and to remove previous slides), a flashlight/smart phone light to see inside the cabinet, tape if you have to hold on to the string in the back of the the drawer and maybe a rag or gloves if the previous slides are really greasy.

2. Trick - Only put two screws in each side of the drawer's slides (tightly at either end), then insert the drawer to test the fit. When the fit is correct, remove the drawer (using the handy release levers) and put in the rest of the screws for the drawer slides (4 per side). It is much easier to make...

United States on Dec 14, 2018