YOOHE Paintless Dent Repair Kit with Puller, Slide Hammer and T-Bar Tool

Alexis: I bought a used "new to me" car that had quite a few dents and dings. I took it to the auto body shop to get a quote to get them all out and they quoted me over $1000!! I then turned to amazon to see if i could find any "do it yourself" tools to hopefully get a few of the smaller ones out on my own. This tool did just the trick! Got out well over half of them and now I'm only spend half the amount of money at the body shop. Worth the $40 and 2 hours to save that money. Recommendation when using the product: park in a shaded area (do not do this in sun, the glue will have trouble drying), let glue dry for longer than it says because you want it to be super dry to get the best results, and finally be (or find someone) really strong to pull the dent out because it definitely takes some strength.

United States on Aug 09, 2020

CGREEN: The product arrived quickly. Instructions were easy to follow. I have two dents on the back hatch of a Toyota Highlander. I started by using the yellow glue stick. I used the appropriately sized tab for each dent. I let them “cure” for 5-10 minutes to insure the glue stuck. When I used the puller, the tab and glue came off with no affect on the dent what so ever. I thought, well ok, maybe I used the wrong glue, so I tried the black glue stick. Unfortunately, same result except, some of the black glue remained on the back door. It was easy to remove. I’m very detailed and try things several times before I give up. My question is how does the surrounding ambient temperature affect this products effectiveness. As of right now, in my opinion and experience, this product is worthless. Do not waste your money on this product.Does Amazon back selling these type of products? I would think that Amazon should check out the value of these products before allowing them to continue to be sold on there site. This experience makes me think twice before ordering anything technical from Amazon.

United States on Jan 20, 2020

John DJohn D: In general the set is reasonably well put together kit.
This is a base, not a pro kit, and the only real negative I have is the pulling (hot) glue.
The rods that came with my kit are the smaller diameter sticks (7mm), not the 1/2" diameter variety.
Didn't work in my glue gun, but that information is in the fine details of the listing, I just didn't see it.
That is my fault, but still a bit of a disappointment.
The reality is that a 7mm glue gun would deliver enough glue for this application.
My 1/2" dia glue gun really puts out more glue than is needed. Oh well.

Other than that, the product worked well and is capable of more than I am at this point.
The plastic glue tabs have proven to last through repeated used - so far. Used 3 different plastic pull tabs, each approximately 40 times, nothing broken yet.
My initial use was to remove a few dents from a stainless steel appliance, and while not perfect, it is way better than before using this kit. Next I pulled a couple small dents from a car and truck. I also picked up the small plastic tipped knockdown tap set (different vendor). All has gone well. None of my repair are perfect, but...

United States on Nov 20, 2019

D.S.: The product definitely works but "professional results" aren't as easy as some of the youtube videos portray. It takes a lot of time and patience if you want great results. Just used the Puller Repair Kit to fix a dent in a door panel. Everything arrived as advertised. The black glue stick adhered better than I expected. I thought the tab would pop off after several strikes as I saw on some youtube videos but I had to remove the larger one with alcohol. The smaller tab eventually did pop off with several hammer blows. I have not tried the yellowish colored glue yet.

The hammer was solid and performed well. Pieces screwed together easily. I thought it was easy to use.

Overall I like the product. Don't be fooled into thinking you will adhere a tab and pull the dent out to perfection. This product does exactly what it says it does....pulls out dents. There is still a lot of work to do after that. Blending, tapping, smoothing was the hard part for me as an amateur trying to tackle paintless dent repair.

Only knock is it didn't include a mini glue gun but that was clear in the description so not really a complaint. Just think it...

United States on Oct 18, 2018

john: Multiple plastic parts you glue gun to the car broke within several uses at the post that the pull bar attaches to. The sizing of the parts has few options for small dents. The enclosed 3 black glue sticks (work best and is easiest to apply and remove) is not enough for a single larger dent job. The three yellow glue sticks are to soft and kept melting in front of the feeder hole into the glue gun. I suggest if you are new at using these tools that you purchase a more complete set of plastic parts with a wider range of sizes and skip the yellow glue sticks and buy at least 10 black for larger dents. Additionally if you can't find 90% alcohol (per the directions) the best removal of the glue from car and plastic parts was goof off. The pull bar itself was heavy and well made.

United States on Jun 17, 2018