By: Art3d
Transform your walls in minutes with Art3d's 11-Pack Peel and Stick 3D Wall Panels! With their faux brick design, these panels are perfect for adding a bit of texture and style to your living room, bedroom, home office, or any other space. They are easy to install and come in a dimension of 2.53ft x 2.28ft, covering up to 64 square feet. Plus, they offer great value for money, making them an ideal choice for your wall decoration needs. Get your Art3d 11-Pack Peel and Stick 3D Wall Panels today for quality, satisfaction, and style!K. A. PetruzzelliK. A. Petruzzelli: I’m really happy with how this project turned out. I needed something to cover the boring tile on my fireplace. It’s the same tile as the floor, and we really needed something to break up the monotony. Once I figured out how best to line these foams brick panels up to make them look as “real” as possible, I was super happy with it. The adhesive is a bit of a pain. It would gunk up my scissors and craft knife, which would make my next cuts not as exact. I just wiped them down with coconut oil, and they’d be ready to go again, but I’d suggest to do as many cuts with the backing still on as possible. I’ll be ordering more of these to do an accent wall in one of the back bedrooms!
United States on Oct 02, 2023
Amazon CustomerAmazon Customer: Fait partie de mes rénovations de cuisine pour cacher un ancien dosseret en céramique. Ns avons utilisé une colle en spray pour s assurer de sa durabilité en rester en place. Je vs conseille de ne pas l étirer en la.posant car elle reprend vite sa forme.
Canada on Oct 02, 2023
Will TurnbowWill Turnbow: We have wanted ceiling brick in our breakfast nook for years but real brick laying was too expensive and we weren't confident enough to do it ourselves. I finally came around to these sheets. The prints aren't the best, some don't align with the brick. But after you cut each so they fit together to look more like brick would lay, it does help.
The sheets are very shiny. VERY shiny so we found that Rustoleum Frosted Glass spray dulled them enough to pass for real brick.
We attached ours directly to the ceiling without using the additional double stick sheets. We did do a test beforehand and it didn't seem better. But I added a TON of 3/8" staples in the grout areas to make sure it won't start peeling off the ceiling in the future (see pics)
Once we had all the brick up, we added tile caulking to the fake grout to cover the staples, cut seams, filling bad print areas and fix the rather generic stock lines. We also dabbed and smeared the caulking on the bricks randomly to break up the repetitive patterns. It looks much better this way albeit a lot more work.
In the end it really does pass as real brick and has added a lot to our breakfast area.
United States on Sep 22, 2023
Deb B.Deb B.: It sticks on the tile, and for a few minutes sticks on wood or drywall. Because I have the black, and it is 3D the staples don't show. So yes, I am using my staple gun. It is so much easier than wallpaper, but that is what it is.. from a distance it looks like bricks but I don't think you will fool anyone. It is perfect for a one-person DIY project. Lightweight, easy to cut, easy to install, I think it will last since walls don't get any wear. I would buy it again in a heartbeat, and am looking at some other projects.
United States on Sep 19, 2023
JaneJane: We love the look of these panels, but unfortunately, even after pressing them against the wall thoroughly, they were continually peeling away at the edges.
We had to nail them down in the end.
Canada on Sep 19, 2023
johnny biggsjohnny biggs: Only thing I'd say look great but started fall off the wood they don't stick to wood so I had nail them up
United Kingdom on Jul 22, 2023
Olivia LucasOlivia Lucas: I made a wizards tower for a fair I went to and it adhered to the card board really well, and I could still move it to advise for the first 10 minutes before I rolled it with a roller to really get it pressed in place. This went on flat and then I cut the cardboard pieces. I was really worried it would lift off however it will stay stuck once you stick it and press it. Just make sure you give it time to adhear really well. I've had it for a month now in this state and there is no peeling. My one recomendation is when placing them to cut the lip off the edge where it's connecting to on the SIDE to give a more seamless look.
Canada on Jun 12, 2023
Rose GrayRose Gray: Quand on regarde vite fait c'est super beau, mais il faut que je recolle des parties chaque jour, ça décolle à plusieurs endroits.
Canada on Feb 06, 2023
RRKRRK: When other people mentioned the downside of the adhesive, they weren't kidding. This stuff makes super glue look bad. I had a hard time just peeling it off my fingers. It is NOT like pre-pasted wallpaper that you would wet, apply and slide around until you have it in the right place. But, I found a great way to get around this. Bear with me...
I've spackled most of the walls in my house. Saw it in a restaurant and loved the look. Pic #1 is the before pic of the wall that I placed the brick on.
I was worried about placing the bricks wrong and not being able to remove them. This is a very easy/forgiving way to apply them.
I first peeled the back paper and then stuck the section I wanted to work with on heavy craft paper. This is available at any home improvement store in the paint area. It's about $15 for a huge roll. Then I cut the craft paper around the edge of the brick. I then used good ole dollar store Tacky glue to stick it to the wall. This way you can slide it around to the perfect position and have at least a chance of pulling it off the wall of it doesn't work out. I then used sewing pins to attach it to the wall and hold it in place until the glue...
United States on Nov 07, 2021
Transform Your Space with Art3d 11-Pack Peel and Stick 3D Wall Panels for Interior Wall Decoration | Art3d Textures 3D Wall Panels - White Diamond Design - 12-Tile Pack | 20-Piece 3D Faux Brick Wallpaper Stickers - White Textured Effect Wall Decor by DeELF Outlet | |
---|---|---|---|
B2B Rating |
82
|
97
|
95
|
Sale off | $24 OFF | $24 OFF | |
Total Reviews | 253 reviews | 256 reviews | 280 reviews |
Installation Method | Self-Adhesive | Glued | Self-Adhesive |
Style | Shapes/Stripes | Shapes/Stripes | 3D Brick Wall Panel |
Part Number | A06004P11 | A10038def | |
Finish | Finished | Matte | |
ASIN | B07F3WBWZ8 | B073NZ67LK | B07873QL6K |
Is Stain Resistant | Yes | No | No |
Usage | Commercial/Residential | Home Décor | |
Shape | Faux brick | Square | Square |
Item Package Quantity | 11 | 1 | 1 |
Pattern | Straight Match | Drop Match | 20 PCS |
Batteries Included? | No | No | No |
Color | White | Matt White | White |
Size | 11 | 19.7" x 19.7 Pack of 12 | 2 by 2 sq each |
Item model number | A06004 | A10038 | |
Number Of Pieces | 11 | 12 | 20 |
Material | Polymer | Polyvinyl Chloride | Foam |
Coverage | 64 | 32 square feet | 80 square feet |
Item Weight | 9 Ounces | 12.6 ounces | 6.59 pounds |
Batteries Required? | No | No | No |
Manufacturer | No | No | No |
Best Sellers Rank | #37,298 in Tools & Home Improvement #22 in 3D Wall Panels | #9,853 in Tools & Home Improvement #5 in 3D Wall Panels | #137,377 in Tools & Home Improvement #105 in 3D Wall Panels |
Product Dimensions | 30.36"L x 27.36"W | 19.7"L x 19.7"W | 24"L x 24"W |
Customer Reviews | 4.1/5 stars of 1,566 ratings | 4.7/5 stars of 3,942 ratings | 4.5/5 stars of 972 ratings |
Brand | Art3d | Art3d | DeELF Outlet |
Date First Available | June 29, 2018 | July 3, 2017 | March 29, 2018 |
Item Weight | 9 Ounces | 12.6 ounces | 6.59 pounds |
Pattern match | Straight Match | Drop Match | Straight Match |
Theme | Space | 3D Brick Wallpaper Peel and Stick | |
Is Discontinued By Manufacturer | No | No | No |
TeyahTeyah: styrofoam material, textured just like actual brick. adhesive is pretty good but I used a squeegee to smooth out air bubbles. otherwise the tiles will not remain in place.
United States on Oct 05, 2023