By: Titan Controls
The Titan Controls Carbon Dioxide (CO2) Regulator is the perfect choice for those looking for a reliable and efficient way to control their 120V controllers and timers. This regulator is designed to provide superior customer support, fitting, build quality, and overall satisfaction. With its superior performance and quality, you can trust the Titan Controls Carbon Dioxide (CO2) Regulator to provide you with the best welding gas regulation experience.Stuart: Regardless of what the instructions say, you must use Teflon (plumber's) tape if you do not want leaks. You also must use a wrench to tighten the bolt 1/2-1 turn past hand tight. If you properly installed the flowmeter, then the tank should not be leaking or emptying until the solenoid is plugged in and both the main valve to the tank and the smaller knob are turned to the left. The CO2 rushes fairly rapidly; keep the smaller knob no more than a turn until the flowmeter reads 2 (I don't know the units.) Get a CO2 detector!! Aim for 1400 ppm in your grow room. CO2 will enter your living areas, assuming your grow room is indoors. Turn your tank off by mid-evening or use a timer. Concentrations above 2000 ppm will be noticeable to your brain, and your plants won't like it either. Lethal CO2 potentially at 5000 ppm. Get a CO2 detector!! Unless your 20 lb. tank is near empty, you should no way need a flowmeter reading of more than 5, even if you are venting to outdoors. There are lots of plastic components. Only grab ahold of the brass parts, or you'll probably break something.
United States on Mar 31, 2020
Ryan: Very easy to use.. solid product.. makes administration of Co2 very easy...
Canada on Mar 24, 2020
Tyler: After buying a cheap manetee regulator and returning it 3 times and wasteing 3 bottles of co2 I learned my lesson and bought the titan. It’s been 6 months and no issues and very easily adjusted unlike others.
United States on Mar 11, 2020
Michael Mouncey: i bought 4 of these regulators and use them with 4 Saturn 6 controllers. After close to a year 3 of them are working flawlessly and one developed a small leak in the auto shut off. I contacted the warranty dept (Hawthorne) and got an immediate response. To my surprise they replaced the entire unit and they covered the shipping costs! I cant say enough about the outstanding customer service I have received from Hawthorne on behalf of Titan Controls.
Canada on Feb 05, 2020
Gavin SchoppGavin Schopp: Purchased back about 6 months ago. It’s never left the box. Today I hook it up and the pressure gauge doesn’t work.
Update. Called titan and with little to no hassle they sent me bc a new one.
Canada on Jan 13, 2020
boris cooperman: Great product
Canada on May 13, 2019
JordanJordan: Set this up on a 8 hour cycle for my planted tank. Can adjust down to well under 1 bpm if desired. It is a little touchy to set that low but once set it stays solid.
Loved it in the grow tent and love it for the planted tank!
Canada on Mar 08, 2019
AdamG: Great regulator, I really battled to get the threaded valve onto my cylinder and due to it being a soft metal it left it in quite a mess after I have finished with the wrench trying to get it on.
United States on Oct 30, 2017
Louf350: it works I have no problem with it came a little bit later than supposed to I thought ahead of time and built into it when I read the article is just a play on words but otherwise it works well worth the money
United States on Mar 15, 2015
Titan Controls 120V CO2 Regulator for Controllers & Timers | BETOOLL HW9003 Regulator Gauge - Perfect for Argon/CO2 Mig Tig Welding Gas Flow Measurement | SPARC Argon CO2 Flowmeter and Regulator for MIG and TIG Welding | |
---|---|---|---|
B2B Rating |
72
|
96
|
94
|
Sale off | $19 OFF | $7 OFF | $15 OFF |
Total Reviews | 19 reviews | 170 reviews | 58 reviews |
ASIN | B004MUDNKS | B01I67VKFW | B01MU57K05 |
Item Weight | 2.9 pounds | 1.5 pounds | |
Item model number | HGC702710 | CHO9600/H09593 | SP00005 |
Item Weight | 2.9 pounds | 1.5 pounds | |
Product Dimensions | 10.4 x 8.4 x 6.1 inches | 6.9 x 5.1 x 5.1 inches; 1.63 Pounds | 7 x 5 x 5 inches |
Customer Reviews | 4.5/5 stars of 386 ratings | 4.5/5 stars of 2,724 ratings | 4.6/5 stars of 862 ratings |
Country of Origin | China | ||
Is Discontinued By Manufacturer | No | No | No |
Best Sellers Rank | #54,587 in Automotive #31 in Welding Gas Regulators | #3 in Welding Gas Regulators | #270,535 in Automotive #105 in Welding Gas Regulators |
Manufacturer | Hawthorne Hydroponics, LLC | szbrt | SPARC Welders |
Uncle Nate: A bit expensive but it does exactly what I need it to do. Set it once and leave it.
United States on Apr 22, 2021