By: Sakolla
Sakolla Homemade Popsicle Silicone Molds with Lid make the perfect addition to your kitchen. Our molds come with 3 cavities and 40 wooden sticks, providing you with plenty of options for creating your favorite ice cream bar treats. The oval design is both stylish and practical, offering an easy way to make perfectly shaped popsicles. We use only the highest quality silicone material, ensuring that your molds will last for years. Our Ice Pop Molds are top rated based on design, material quality, overall satisfaction, and value for money, making them the perfect choice for your kitchen. Stephen: They come with no instructions, so a few pointer for ice cream bars:
-There is a thin slit to push the stick thru at the bottom. This won't be obvious at first.
-Ice cream sticks to everything and melts immediately. Any surface you use to hold your ice cream bars preferably should be cold.
-Melting chocolate is much easier in a microwave than a double-boiler.
-Use a tall, narrow, heat resistant/insulated container to hold the chocolate for dipping.
I used a Ball pickling jar.
-If adding nuts to the surface of your bars, dip the bar and add the nuts immediately, the chocolate, once in contact with the bar, will harden immediately.
United States on Aug 08, 2021
Amazon Customer: PROS: I wanted a slightly larger capacity than most molds offer. And one that removes remove easily from the mold without having to hold under running hot water. The lids are not very sturdy, but they do cover the popsicles so that they can be stacked for freezing. Being silicone, they are a little floppy, so it is best to stabilize them on a cookie sheet.
CONS: Getting the sticks level was impossible for me. I cut off the tab that the stick is supposed to sit on (which forces the stick down or up, depending on whether you angle the stick on top of the tab or below the tab). Once the tab is cut off it is still a bit of a challenge to get them level, but it is possible. You may get a tiny bit of a leak from where the stick inserts, but no more than 1/4 tsp.
United States on May 20, 2021
PmG: Work great. Works best for thicker ice cream mixes, probably not so great for watery mixes. Easy to remove.
Stackable in the freezer.
Holes for the sticks are there, it's easier to push the stick through after the first time.
Canada on Jul 24, 2020
Becky W: I love these popsicle molds so so much. I have purchased others but they are harder to remove the popsicles from. These are a piece of cake!!! Love them!
The only con is a small thing. When you slide the popsicle stick into the mold it always lays on the bottom of the mold. I am usually adding fruit like blueberries or blackberries so I correct that by placing a small blueberry underneath the very end of the stick in the middle of the popsicle cavity. Tada. Problem solved.
I recommend these molds. Iβm going to buy a second set for sure!!
Update: I purchased some of the mini popsicle molds that look just like these only thereβs 4 to a tray instead of 3 popsicles. I was very surprised that the popsicle sticks go in and are perfectly positioned!
I wish the seller of these would replace my faulty set that the sticks donβt sit correctly in. Itβs too much trouble to send them back and my return window expired already. π thatβs the only reason I gave these a 4 star rating instead of a 5 star. Still all in all the best popsicle molds Iβve purchased and Iβve bought quite a few different types!
United States on Jun 22, 2020
marlene ferron: I was skeptical about popping the popsicles out with the way the sticks are but they honestly slide right out. I made βsmoothiesβ and froze them in these and the mold was great. They even supply the popsicle sticks! Just make sure you pop the sticks through to break the silicone before you make your first batch
Canada on Jun 22, 2020
DIVYA IYENGAR: All features are fantastic as advertised. However I would recommend the following changes:
- the stick caves down at an angle when inserted and the Greece doesnβt firmly hold it down; weβre using an elastic to make it work but a firmer groove would be better;
- the seal on top of the case is not firm at the edges; its more like a peel on/off rather than a leak proof seal; some design change there to keep the seal firm will also help;
Canada on Jun 13, 2020
brandibrandi: Just used this item for the first time. I think it'll work fine for my needs. I have a toddler who I absolutely cannot get to eat veggies even the veg/fruit pouches, but she loves icecream, so I used a pouch to fill the mold. I did have to use a utility knife to just open it up enough to fit the stick into the hole I cut (see picture). The design makes no sense bc there isn't a real way to put in the stick so it's positioned where it should be in the middle of the pop. Since I used a thicker mixture, I had no leakage using it thus way and they turned out perfect. They came out of the mold very easy. I popped it out of the top first then pulled the stick portion out through the hole. The lid in the original pic looked like a solid lid, but it isn't. It's just a very thin, flexible cover. It's fine but it does lay directly on top of the popsicle contents. If you use juice instead, I can see how it would become a mess and spread your contents out instead of keeping them where they're supposed to be. Maybe freeze first then add the lid for longer storage. For thicker content, like I did, I used the lid right away and it was fine. Spread it out a bit but not enough that they were...
United States on Jan 26, 2020
CHARLENE PENTLANDCHARLENE PENTLAND: π‘π€ Home π‘ made popsicle OR why I bought it was for separating evenly measuring ice cream π¦ into portions sized out for equally of flavour & for sharing βοΈβΊοΈππ With this I can have 3οΈβ£ different scoops of ice cream π¦ flavours that aren't in ice cream π¦ bins βοΈπ¦ππ»πππ»πβ₯οΈ Yum , using this I can eat with out my hands getting messy ,π holding a cone βοΈπ Some times that is fun , I do like cones Yet I really hate the sticky stress & this comes with π― sticks β ππ I can make theses ahead of time & put them in baggies βοΈβ πππSealed & ready when I want them , no scooping & then clean up , baggies & sticks can be thrown out βοΈ π©ββοΈ With this I could easily use plastic sticks from a regular dollar π΅ store & re-use them βοΈππ π€·π»ββοΈππ€·ββοΈ At least its ONLY washing a few sticks , they can easily fit through the hole β πππππ»β₯οΈ Making these ahead of time , means no opening & closing each ice cream π¦ bin , changing quality & freshness βοΈππ€·ββοΈβ₯οΈ Besides I can then fit them into a...
Canada on Jan 23, 2020
baroness: I carefully reviewed all popsicle makers before deciding on these and it was the perfect choice. I needed to have one that lay flat in my small freezer. I live alone and make fabulous pobsicles about twice a week now (or more). I Can remove one or 2 and put in a baggie if I want to make a new batch in both trays. I have a rubber band to go over the end of each stick to help hold them a bit more level, tho it does not bother me to have them slightly crooked. My recipe made in the original small size Magic Bullet includes 1 banana, 1/3 c. blueberries, some watermelon chunks, a heaping spoon of cranberries, or sauce, raw cacao powder, beet powder, goat milk yogurt, bit of sea salt and some Stevia to taste!. Yum!!! I have perfected this over a few weeks. I have the 2 forms on a small size plastic cutting board just a bit bigger than the trays to carry them in and out of frig. The silicone mold is very loose and floopy so you need something firm underneath.
The popsicles are easy to remove, the little trays easy to clean and having this size is perfect for my frig and me, living alone.
United States on Oct 21, 2019
SAKOLLA Silicone Popsicle Molds for Homemade Treats | Koverz Kooleez Neoprene Freezer Pop Sleeves - #1 Original 8-Pack for Full-Length Ice Pops | ARTLEO Ice Cube Tray with Lid and Freezer Storage Bin | |
---|---|---|---|
B2B Rating |
93
|
98
|
97
|
Sale off | $2 OFF | $6 OFF | |
Total Reviews | 205 reviews | 402 reviews | 263 reviews |
Product Dimensions | 3.9 x 2.01 x 0.39 inches | 11"L x 7"W x 4"H | |
Material Type Free | Bpa Free | BPA Free | |
Material | Wood, Silicone | Neoprene | BPA Free |
Brand | Sakolla | Koverz | ARTLEO |
Is Discontinued By Manufacturer | No | No | |
Date First Available | April 14, 2018 | December 21, 2018 | August 8, 2021 |
Color | Red | 8-Pack | Pink |
Number of Pieces | 2 | 8 | |
Item Weight | 9.6 ounces | 0.81 ounces | 11.6 ounces |
Customer Reviews | 4.6/5 stars of 1,609 ratings | 4.8/5 stars of 3,972 ratings | 4.5/5 stars of 9,328 ratings |
Best Sellers Rank | #266,048 in Kitchen & Dining #510 in Ice Pop Molds | #30,520 in Kitchen & Dining #46 in Ice Pop Molds | #5,548 in Kitchen & Dining #73 in Ice Cube Molds & Trays |
Item model number | 8541984414 | ALIICE12 | |
ASIN | B07C6JYGPQ | B07MMYP27C | B09C4W7DSR |
Item Dimensions LxWxH | 3.9 x 2.01 x 0.39 inches |
IlyasIlyas:
Canada on Jan 21, 2023