By: PC Products
PC Products 70086 PC-Concrete Two-Part Epoxy Adhesive Paste is a great choice for anchoring and crack repair in tiles. Its easy-to-use applicator syringe ensures a hassle-free installation. This two-part epoxy paste adhesive is ideal for filling and repairing cracks in concrete, and its high-tack paste resists moisture, making it suitable for both indoor and outdoor applications. With an application temperature range from 35 to 115 degrees F, this product is an excellent value for money.Ryan Schultze: Matched color & ease of use
Canada on Nov 03, 2023
chad: I use this to install some anchors in the concrete for a post and it works great! Way cheaper than the huge tube. Do you have to buy at Home Depot that you enough doing most of it away and you’re out 30 bucks
United States on Sep 30, 2023
KD: My concrete pool had developed some thin settling cracks and as a result,..was leaking an estimated 50 gallons per day. This last winter, I drained the pool, used an angle grinder to widen the cracks, then applied this stuff. A few days later, I sanded it,...then prepped and painted it with a 2 part epoxy pool paint. Has worked beautifully. Pool has been full all summer and NO MORE LEAKS. Great stuff. Highly recommend for similar type of project. It does set up quickly though (15 min) so make sure you use small batches.
United States on Sep 17, 2023
BIG D: k
Canada on Sep 13, 2023
Amazon Customer: This product was exceedingly disappointing during the attempted application . The delivery tube didn't screw properly on the top of the sausage. When pressure was applied with the caulking gun, the delivery tube came off spilling the epoxy, creating a mess. I have worked with other epoxies such as Sika "pro select crack fix" and Sika is much easier to use. Also compared to Sika, this product is overpriced.
Canada on Sep 12, 2023
Saturn: This 2 part epoxy is ideal for fixing small cracks and foundation spalling on your concrete foundation.
Precisely mixing the 2 parts together is challenging since it is a 1 to 1 mix it must be fairly precise when mixing it. I used a couple plastic spoons to keep them separate. One spoon is used for the epoxy base and the other was used the epoxy hardener. You must do this mixing process with extremely good air circulation. The hardener fumes are toxic so you will need to open the epoxy hardener container and stir it due to settling then put equal amounts of base and hardener in a small clean container and then quickly close and seal the lid on the hardener container. You can buy this same PC Concrete product in a caulking tube size that pre-mixes it and then dispenses it, but it would cost considerably more compared to these bulk containers. Once it is mixed you have about 15 minutes to apply it to your foundation. repair.
United States on Sep 04, 2023
Kindle Customer: Very good
India on Jun 10, 2023
Dale Weise: used to rework a storm shelter installation, that the installers 2 part epoxy never adhered to the concrete floor in the garage, or to the bottom of the shelter. Roughed up both surfaces with diamond blades in a multi tool. The epoxy is quite sticky when mixed, had decent working time. I taped off the floor & storm shelter, mixed batches equaling approx 1/8th of container. Then troweled in off a piece of sheet metal I mixed it on, making sure to swirl it on both surfaces prior to gap filling. My application a bit different than normal uses, as the storm shelter was in place & weighs approx. 4,000 lbs, with some gaps 1/4-3/8 of an inch, due to garage floor irregularities. All said it seemed to bond to both surfaces, easy to trowel in using a margin trowel, , and has cured very hard with in the 24 hrs stated . As far as strength/adhesion? Won't know unless it gets Tornado tested. I do believe it definitely enhanced the strength of the anchor bolts in to the concrete. Got way more product at way less expense than purchasing in caulk tube form... the 2 tubs did interior & exterior perimeter of a 4x6 ft shelter
United States on Apr 06, 2023
Shelley Brown: I ordered to fill cement cracks and low spots in garage. Must mix thoroughly and be prepared to use immediately as it sets within 10 min. So far so good. There was two of us working-one pouring one spreading.
Canada on Jun 19, 2021
PC-Concrete Two-Part Epoxy Adhesive Paste - 70086 - Professional Grade Bonding Solution for Indoor and Outdoor Use | PC-7 Epoxy Adhesive Paste - Professional Grade Bonding Solution for Home and Business Use | J-B Weld 8281 Professional-Strength Steel Reinforced Epoxy Twin Pack | |
---|---|---|---|
B2B Rating |
89
|
96
|
96
|
Sale off | $2 OFF | $2 OFF | |
Total Reviews | 362 reviews | 772 reviews | 641 reviews |
Item Form | Paste | Oz | |
Color | Gray | Grey | |
Compatible Material | Concrete, Masonry, Grout Filled Block | Ceramic, Metal, Plastic, Polyvinyl Chloride, Steel, Wood, Fiberglass, Brick, Concrete | |
Material | Paste | Epoxy | |
Brand | PC Products | J-B Weld |
Diane Dozier: I used this to repair a slightly cracked driveway due to a tree removal companies negligence. It has been two or three weeks after I used it and it still feel solid and stopped any further cracking. Cures really fast. I highly recommend this product.
United States on Nov 16, 2023