Mibro Group 416381 8" Carbide Stacking Dado Blade Set with 14 Pieces - Perfect for Woodworking Projects

MrBMrB: Mibro 8 inch "Buzz" dado blades. I took a few pictures of my first test cuts and as you can see, they did a pretty nice job. Nice flat bottoms with only some very slight grooves left over in the middle. I personally doubt those $300 blades would do any better than this. These are keepers for sure. Thank you Mibro.

United States on Dec 27, 2023

Linda Nissen: This was actually my first time using a dado set. I had to use test cuts to figure it all out, but it was easy and when you have a lot of cuts to make it is much easier then several passes with the saw. Just make sure the blades are facing you. The instructions are good and go over everything pretty well.

United States on Dec 11, 2023

Victor s.: Funciona bien no se forza y es facil de instalar.

Mexico on Sep 11, 2023

Amazon Customer: This product was well packaged to ensure that it arrived in good quality. Did many cuts in wormy maple solid wood with half inch dato. Cut was accurate to the last piece. Recommend purchasing.

Canada on Apr 13, 2023

Case: This stack is surpisingly decent for the money. But the setup instructions might be confusing to a dado newb so I can't help but wonder if some of the bad reviews were from users that misinterpreted the instructions the way I almost did & set up the blades incorrectly. When the blades and chippers are oriented properly, they cut smoothly and very flat. On box joints, the shoulders are pristine and the bottoms are pretty darn smooth & very flat. And little to no tear-out when using a backer board. Light sanding is to be expected, but very little cleanup work. I almost got the blade orientation wrong based on the vague way in which the instructions describe orientation of the blades, but a quick & obvious rethink made more sense. If you're reading this and opt to buy these blades, despite the lack of specific instructions within the manual, each of the outer blades are to be oriented with they're printed sides facing out opposing one another - the inside blade facing out to the left of the saw and the outer blade facing out to the right of the saw - and the teeth facing down towards you when you're standing in front of the saw. And the chipper teeth obviously are facing...

United States on Mar 24, 2023

K Dougall: Good quality product with good instructions. I have only completed half a dozen dodows with the blades but very happy with the results. You actually get more blades than the name brands so good value for the money

Australia on Jan 17, 2023

Rodrigo Goulart Alves: O manual por ser em inglês, não se entende muito o que se explica por lá, mas estou bem satisfeito com a compra.

Brazil on Aug 10, 2022

RubenRuben: Voor de prijs zeer tevreden met het product. De testsnede is gemaakt met 3 chippers en 2 shims. De groef heeft een vlakke bodem, in tegenstelling tot eerdere reviews.
Verpakking was kapot bij levering, maar product zelf is intact.
Zeer vlotte levering en communicatie met verkoper.

Netherlands on Feb 18, 2022

suzanne swift: I am using a Ridgid portable table saw (can't remember the number but it ends in 12.

This table saw takes a 10" blade, however, with a dado blade it calls for a 6" blade. This one is technically TOO BIG, and the reason is that it requires more power from the engine to use a larger blade.

The manual ACTUALLY STATES it can take a dado, and how to set it up.

With that said, this saw NEVER MADE a dado blade set OR a faceplate for one (it's not called a face plate, but can't recall the name). Anyway, you'll have to MAKE your own using plywood and a saw to cut it out. There are even how to videos on YouTube on making your own insert plate.

Once you get that done, the dado comes with very specific instuctions on how to SET IT UP. You MUST follow them exactly or risk damagign your blades or yourself. Also read you saw manual.

This cuts very cleanly and very well. I am cutting kiln dried HARD maple boards and making a nickle gap edge, 1/2" wide by 1/2" deep. The boards are 1" thick and this set-up fits PERFECT.

I highly recommend the use of a feather board to help push the top of the board and hold it on the dado.

With that said, I did...

United States on Mar 31, 2021