"Insulate Cracks and Gaps with GREAT STUFF PRO Insulating Foam Sealant"

Clinton C.: Usually don’t have a problem but half of this batch was wasted bc the cans had no pressure whatsoever was disappointed with his time around and I’ve purchased about 40 boxes of these and nvr really had a problem before

United States on Sep 07, 2023

Amazon Customer: The order delivered quickly and it was what I ordered. I used this product to seal my n÷w storage building.

United States on Aug 11, 2023

Stephen Potter: I'm working on insulating parts of my house and this was a great deal. Thankfully, all the cans arrived intact and there weren't any issues. Each can worked perfectly. If you have a large project in front of you, I recommend this!

United States on Aug 07, 2023

QuigdaddyQuigdaddy: I bought this kit to seal the edges of sheet foam between studs in my workshop, as well as seal gaps in my drafty basement. I was a bit skeptical about how much I would get out of the kit...seemed like not much, but I was dead wrong. I did my entire 400 s.f. garage (10' high walls) with 3 cans. I also used 3 cans of the regular big box store stuff and I estimate that all 3 cans of the "non-pro" are the equivalent of around 1/3 of a can of the pro. It also sticks to horizontal surfaces much better than the regular stuff. If you look around my garage all of the drips and dribbles are from the regular stuff not the pro foam. Easy to clean with included cleaning solvent. Easy to use. You have a lot of control over how much comes out and you can vary the speed you move the gun as well. Highly recommend this product.

United States on Jul 10, 2023

Bill M.: The gun basket has a different thread than the foam canister, so it's not a simple twist on twist off installation. The foam was coming out all over the basket while I forced the canister to thread into the basket. Maybe they sent me the wrong gun for Great Stuff canisters, but it all came as a kit, so it should have worked fine together but didn't. The mess made it difficult to clean the gun because foam was all over it. And it cured on the outside of the gun while I was using the gun. The barbed tip of the gun did not hold the applicator tip or the plastic straw on the gun... the pressure of expanding foam in the tube pushed it off and the foam came out and got all over the place. I never did get a clear spray of cleaner out of the gun and used half a can of the cleaner to clean the gun after using only one canister of foam. At that rate, I'll need 6 cans of cleaner per dozen canisters case of foam to prevent ruining the gun by inadequate cleaning. The cleaner is almost as expensive as the foam. The foam canisters do contain a lot of foam. I was pleased by the volume of foam dispensed from each canister. The gun worked fine when applying foam near the floor and walls, but not so...

United States on Jan 08, 2023