GELIVABLE Mold and Mildew Remover Gel - Effective Household Cleaning Solution

Benson Childress: This product works, so I’ll lead with that. But it’s a pain in the ass to apply to grout lines on shower walls, and you have to leave it on for like 4 hours before washing it off.

United States on May 23, 2023

Amazon Customer: I had pretty ugly black mold around the base of my shower stall. I tried just about everything: The hardware store mold and mildew removers; paper towels saturated with bleach and left in place; even sprayed on bleach followed by spraying on peroxide. They all barely made a difference. One application of this product, following instructions, and the caulking was white and so far is staying white. Only negative is as it sits on the stains it gives off a very strong bleach odor so good ventilation is a must. Will definitely re-order when I use up this tube.

United States on Nov 22, 2021

RAW: I was extremely skeptical of this product especially after reading reviews from people who said it did not work. But since nothing else worked, this was the last resort before digging out old caulk. We have an under counter mounted sink with a Silestone counter top in our kitchen. The bead of white caulk between the sink and counter top is about a ¼ inch wide and had a fairly substantial amount of mold growing. We tried bleach, Soft Scrub, and other homemade remedies and nothing worked so we tried this product. I basically followed the directions with some minor modifications. We dried the caulk and sink thoroughly with paper towel first. Then I squeezed a pretty thick bead of this product all around the caulk line between the sink and counter top. Don’t skimp! Put a nice thick bead just as you would apply a bead of caulk. I applied the product at about 9:30 PM and went to bed. Woke up around 7:30 AM, so it was left alone for a good 10 hours. Immediately I could see the mold was gone. I simply wiped it away with dry paper towels and cleaned up any residue with a damp sponge. That was it. Mold gone! I found one tiny spot I missed, so I repeated the process on that spot. Done!

United States on Jun 18, 2021

pnlop1: I have some 100% silcone calk made by GE that says its mold resistant for 8 years. More like 8 months. I hate re-caulking. I tried bleach on some molding caulk and it helped a bit, but it still looked bad enough that I would have to replace it. This mold remover said that it worked through a different approach; using the enzyme lysozyme to digest the protein. I though Id give it a try overnight and was pleasantly surprised to find that it removed a lot more mold than the bleach. Its not perfect, but looks good enough. After using it overnight I scooped the gel up and applied it to another section of caulk--but it didnt do much. I thought the enzyme would keep working....Im not sure how they stabilize it or why it would stop working after one application...if anyone has some insights Id be curious to know.

United States on Jan 01, 2021

NoCalGal: I used this in my bathroom on the caulking around sinks and toilets. They were looking yellow and a bit moldy. This stuff worked really well and I was surprised how well it worked! I was thinking I may need to recaulk these areas but after using this product I won't need to. The caulk around my toilet and sinks now look bright white!
1. Works well to whiten caulk
2. Gel is thick so product stays in areas you want it

Only 4 stars because the lid could be improved. It comes with 2 lids. One lid you need to cut with scissors so you can squeeze the product out. The product is a bit thick so it was tough to spread evenly on the areas I wanted. After you cut the top off of the cap there should just be a small tip that goes over that tip. Instead you have to screw off that top and put the lid on. So, you need to keep 2 tops for the bottle. For $11 the top should be improved.
Improvements
1. Applicator tip should have a small cap on it so only one top is needed for the product. This way you need to keep two tops for the product, which is clunky. You need to keep them in the box.
2. Product should come with a small brush to more evenly apply the product over uneven...

United States on Oct 17, 2020