Fanimation 3-Speed Ceiling Fan Wall Control with Reversible Motor and Light Dimmer

A.T: Had to replace ours, thought of calling electrian, but husband & I were able to easily install this & it works great.

United States on Sep 03, 2022

FOBO: We bought a house with a non-working fan control of a different brand. This control wasn't an exact match to the bad control, but looked very close, so I decided to give it a try. It seems that all these devices are made alike and sold under different brand names. I thought this wall mounted control would be hard wired to the fan, but it actually works by sending a radio signal to the fan. If your wall control isn't working, the problem could be with the wall control or the receiver in the fan. Working with the receiver can make for an awkward situation if you fan is high off the floor. Plan on getting on a ladder at least 8 feet off the floor if you need to access the receiver. Dip switch settings in the wall control must match settings in the fan receiver. Leave the dip switch settings in your wall control and fan receiver in their original positions and check to see if they match. Initially, set the new wall control dip switches to match the settings on the old wall control. I took pictures with my phone of the settings on the old wall control and the receiver for reference. There are 4 dip switches on each device so if things don't match you only have 16 switch configurations...

United States on Apr 03, 2022

Richard S.: Ceiling fan

Canada on Nov 22, 2021

Amazon Customer: Replaced an inoperative 15 year old Ellington ceiling fan wall switch unit. This Fanimation replacement wall switch was the exact same model. All the needed parts were included and the instructions were straightforward. Hard-wired and installed easily in less than 5-minutes. Set the switch-codes the same as old wall switch. The fan, up lights, and down lights now all work like new.

United States on Aug 21, 2021

SpunkySpunky: On my original switch the 2 light buttons stopped working after about 13 years. I found the Fanimation C23 looked identical and bought it and it works perfect on my Hampton Bay fan. All I had to do was set the DIP switches to match my original switch.

Canada on Oct 26, 2020

Hawg: Arrived in open box/used condition.
Returned.

Canada on Feb 26, 2020

Franky. Valentin: After installation it work good with the remote control but manually it does not work as well sometimes work fan and light but other times it does not work.

United States on Oct 02, 2016

BK2X: Years ago when I built my house, we purchased an Ellington Fan for our living room. Within 2 years the supplied wall switch started making a fizzing noise each time I shut the fan off using the On/Off switch on the bottom of the control unit. The control unit eventually gave out and no longer controlled the fan. I came across this Control unit from Fanimation and installed using the same wire configuration as the Ellington switch and sure enough I am back in business. This unit worked perfect for replacing my 7 button control unit.

United States on Aug 11, 2016