By: Endurance Pro
This Endurance Pro BP28 Bathroom Fan Motor 99080166 and Blower Wheel Replacement for Broan Nutone 70CFM 120V is the best electric fan motor available. It offers unbeatable customer support, excellent value for money and is easy to install. Plus, it runs at a low noise level, making it perfect for any home.Thomas I.: The motor was delivered around 6AM and was installed by 6:30AM. Perfect fit, sounds strong and quiet. Incredibly fast delivery and service. Well Done!
United States on Oct 28, 2023
Joe Shmo: This little motor seems to be working great and it is quiet. The thing that gets me irate is that they did not include the nuts to mount it in the frame. The nuts I had form my old one were too big. Why cant they simply include the two nuts for an extra few cents? Be prepared to have to rummage through your shop or head to the store to find the correct nuts. But it is still a great deal and I would recommend buying it.
United States on Oct 05, 2023
Mrl: You have to understand it’s a70 cfm with 3000 rpm so it’s not going to be whisper quite but it’s not terribly loud either .it fit perfect on an older Broan 969 that had a much bigger rounder motor that was 60 bucks or more to replace so I’m very happy with it so far ..my bracket had extra holes factory drilled and this dropped right in…
United States on Aug 30, 2023
JeremiahJeremiah: The media could not be loaded. I did a fair bit research and decided to save everyone else the trouble. This motor will fit a 763 RL unit, which originally came with a 50cfm fan. The mounting plate and box are pretty much identical to the unit that this one belongs to. It's definitely close at the top and you may find that a hammer to the top center of the box for an extra 1/4inch may helpful, but I only had to do this because I used rubber washers to mount the motor to the mounting plate (the unit is significantly quieter and It is certainly quieter than the 50cfm motor without rubber washers.)
Being that the two are the same price roughly, I highly recommend getting this over the original motor. The heat sink uses double the heat pipes, and is significantly thicker as shown in the pictures. The difference in height is about a quarter inch and the fan is significantly bigger in circumference (however, this box was designed a fan this big, so it's not even tight on the sides) but there is plenty of room if you use a little bit of ingenuity for the height difference. It's very miniscule and most people probably won't need to do anything to fit this fan.
The old...
United States on Feb 27, 2023
Endurance Pro BP28 Replacement Bathroom Fan Motor | Complete Replacement Kit for Endurance Pro Universal Bathroom Vent Fan Motor | Thermaltake Riing 12 High Static Pressure 120mm Circular LED Ring Case/Radiator Fan - Bright Blue Illumination | |
---|---|---|---|
B2B Rating |
82
|
97
|
96
|
Sale off | |||
Total Reviews | 126 reviews | 947 reviews | 1 reviews |
Brand | Endurance Pro | Endurance Pro | Thermaltake |
Best Sellers Rank | #14 in Electric Fan Motors | #3 in Electric Fan Motors | #1,639 in Computer Case Fans |
Speed | 3000 RPM | 3000 RPM | 1500 RPM |
Horsepower | 1 hp | ||
Manufacturer | Endurance Pro | No | |
ASIN | B07PVLDHN7 | B073X7P42F | |
Customer Reviews | 4.5/5 stars of 1,056 ratings | 4.6/5 stars of 4,246 ratings | 4.7/5 stars of 3,196 ratings |
Date First Available | March 21, 2019 | July 13, 2017 | |
Material | Plastic | Rubber | |
Package Dimensions | 9.09 x 5.98 x 3.23 inches; 1.92 Pounds | ||
Voltage | 120 Volts | 120 Volts | 12 Volts |
Item model number | BP28 99080166 | Electric Motors C01575 | |
Electric Fan Motors | Electric Fan Motors | Electric Fan Motors |
David M Lee: This motor is not reversible nor mount modifiable. It is indeed a replacement for a Braun vent fan. Same mount holes; same current draw; same fan blade. BUT ... the manufacturer assumes you need to mount it with the blade below the motor. If (as in the case of a 1980 replacement) you need the blade to be above the motor, you will need the drill a hole in the bearing case that doesn't have a hole in the center of the case so that the motor shaft can go through the bearing case allowing the fan blade to be above the motor.
I did this quite cautiously on the drill press and all is well. If you don't know how to do what I just described you won't be able to use this motor configuration.
United States on Oct 29, 2023