CECCORP C-POXY 5: Two-Part High-Performance General-Purpose Epoxy Adhesive for Strong Bonding and Durability

Kris Chute: Works as described...

Canada on Nov 11, 2023

Roger: Don't cut the bottle spout too small - as the epoxy gets older it gets thicker and hard to squeeze out. As the level of epoxy in the bottle gets lower, After use, put the cap on tight and store in the box spout down so the epoxy is close to the spout the next time you use it. The hardener stays soft with age.

Canada on Nov 09, 2023

Kevin: Used for custom knife handles and components, can’t be beat when time is a factor

United States on Oct 25, 2023

Mark Urbaniak: Just what I was looking for.

Canada on Sep 03, 2023

KPD: I LOVE the fact that the two components are separate - - -I was so sick of buying epoxy in the joined dispenser that literally you could use once or twice before it froze up - -those duel dispensers are USELESS - -this is the way to go.

Beside the separate bottles the most important thing to note: THIS STUFF WORKS! I have finally found an epoxy that I will use and that I will keep buying - -this is now my go to glue - -and I have used many of the big name brand glues, which are weak compared to this stuff.

Excellent product and I will look to use their other epoxies - -This really is 5 min epoxy - -so, be organized or get one of their longer curing epoxies.

Canada on Aug 14, 2023

Darren Hennig: Use dthis on a project and it worked very well. Came well packed, and quickly shipped. Works as advertised. A great value, thanks!

Canada on Aug 14, 2023

Dean-Nadine Y: This product is perfect for use with filling voids on decayed wood. I used with mineral for coloring or design element on my turnings. It is quick and easily tooled on the lathe. After having some difficulty with the resin hardening while in storage, (perhaps to cold for the resin). CEC advised to try microwaving for one to two minutes to bring back to a fully liquid state. This is why I rated it highly since many companies ignore requests for help with their products, but CEC was very helpful.

United States on Sep 21, 2022

Mcins: It works it is not the best 2 part epoxy, and would probably use other products in the future, however it is not bad. I can't complain as it was not expensive. I can scrape it off of most surfaces. I was hoping it would be thinner, stronger and would soak into wood better. It is OK not great not bad.

United States on Jun 22, 2021

li'l bamboo: I like two-part epoxy but I had the syringe dispensing method as one side usually dispenses more than the other. These two bottles eliminate the problem and after mixing for the required time the epoxy set quickly and very strong.
I used toothpicks to dispense the two different parts, different toothpicks for each part. I didn't need much to do what I wanted so it was easily done.
I would recommend this product.

United States on Jan 11, 2021

Sabayon Linux User: Five minute Epoxy seems to be fundamentally different from slow set epoxy resin. It is usually more clear, and more flexible when it cures. If you need your epoxy to cure hard, and have max adhesion, and strength, then use slow set epoxy. This works best with a reasonably close fit-up, (small gap) and a roughened surface helps it adhere. Also, the 5 minute rating is the "pot life", not the handling time. In other words after you mix it, you have 5 minutes roughly to work with it. Actual time to handling strength (un-clamp time) is longer, at least 30 minutes, and depends on temperature. May take 12 hours or more to reach maximum strength. Do not mix a large batch at once, it can catch on fire if it is unable to dissipate the heat generated while it cures (exothermic reaction).

United States on Nov 12, 2020