Brass Sink Faucet Diverter Valve with Sink Hose Sprayer by CIENCIA

William Brase: Works

United States on Sep 08, 2023

Diosdado.martinez: It’s great product for the shower.

United States on Sep 07, 2023

Ariznatives: Tried other brands for our small washing machine to connect to the bathroom or kitchen sink and all of them leaked. This does exactly what it's supposed to do with no leaking and easy to install/remove when needed. Nice to be able to continue to use faucet when it's attached.

United States on Aug 01, 2023

QuercusQuercus: This valve worked very well. Its only flaw is poor sealing because of the low height of the washer provided. See the first figure for the installed valve with the required PTFE tape on the threads. Even then it leaked a bit as shown in the second figure. The leaking occurred in both flow directions.
Initially we tried the black washer that came with the valve. However, as shown in the third figure, the shelf inside the valve top was so narrow that it did not support the flexible black washer enough. The washer just deformed into the diverter. A white, stiffer washer, also provided, did not have that problem but, as shown in the fourth figure, did not extend high enough above the threads to form a good seal with the faucet. The fifth figure shows the original aerator with its black washer sticking up above the threads enough to make contact and deform.
Fortunately, the leakage was slow enough with the white washer and PTFE taped threads that using it was acceptable. The valve otherwise worked well. The handle turned easily with enough resistance to hold its position. The valve could even be turned part way allowing a flow from the faucet for rinsing hands of an operator while...

United States on Jul 13, 2021

Kindle Customer: I saw one review somewhere that someone had an issue with their mobile home faucet plumbing not doing well with the pressure, but I couldn't remember where. Turns out, it doesn't matter. This should come with a disclaimer that it is NOT for mobile homes/RVs, as the plastic faucets and connections can't hold up to the back pressure this creates, even on the "faucet" setting, because this makes the faucet opening is too small for the water pressure. I'm just thankful that I had a bunch of water to clean up and an undersink cabinet to clear out and dry and not a whole faucet and plumbing to put back together. I first tried it on the soaking tub faucet, but thankfully it kept blowing off the faucet and I thought the threads were stripped on my fauce, so I only had a little bit of water underneath it.
So much for making it easy, maybe one of the cheap "dog bath" hoses really will stay on. Hahahaha... :/ Otherwise, it seemed well built, but I couldn't tell you for sure.

United States on Apr 06, 2020