48" x 10' Roll of Supershield Multipurpose Reflective Foam Core Insulation - BP48010

jhh: very easy to install good insulation R factor

United States on Sep 26, 2023

BwanaBob: I bought this to insulate the dinette seat in our camper from the hot water take below. I needed something thin, flexible and easy to install because of the very minimal clearance I had. This stuff fit the bill perfectly. It was easy to cut with a decent pair of sharp scissors, though the seller provided a nice little mat knife (and high quality foil tape!) if you prefer. The foam between the foil laminate didn’t flake, shred, crumble or collapse, nor did the foil delaminate along the edges of the cut. Since it’s so well made, you could cut really small pieces or trim to intricate shapes with confidence that it won’t fall apart. For my application, I mostly stapled it in place with a regular-nothing-fancy staple gun and some of the tape the seller provided. I’m sure you could use an adhesive if you needed to, but I’d test the adhesive I was planning on using on a small sample of both the foil and the foam to make sure you get the bond you want and that the adhesive didn’t damage the foil or the foam. Anyway, I’m happy with the product and it met or exceeded my expectations. Remember, it’s a thin product made for specific applications where space is at a premium, so...

United States on Jun 10, 2021

ron spinelliron spinelli: I purchased the thermal blanket product in a roll form so that I could custom wrap my domestic hot water tank. I was pleased and surprised that in addition to receiving the roll of material, It also contained a small roll of high quality aluminum tape (great adhesive material), a plastic squeegee and a utility knife. All I needed to add was a straight edge a marker and tape measure. The insulating blanket material was easy to work with and wrapping it around the tank was a breeze!
I highly recommend all DYIer's to purchase this material and save money on your gas/electric or oil costs this winter.
Ron S.

United States on Oct 28, 2020

Captain Stacey: Perfect sun shield for the pilothouse windshield on our Bayliner 4588. Trimmed off about 2" from the top and rounded the bottom corners. Cut a slit down the middle about 3/4 of the way down and used the aluminum tape to seal the overlap. We use 2" blue tape to seal the 2 side edges to the edge of the windshield. Super quick to remove when we need, and just as quick to put up. Looks professional and was easy to fit. Quality of the shield is great, it's lightweight and sturdy. Thanks!

United States on May 02, 2020

SE_Gardener: I can't believe the difference this Reflective Foam Core has made in my greenhouse. I installed on the north wall with dble stick tape on the aluminum profile ribs in 8 ft strips leaving approx 1/4th roof. the amount of light bouncing around my greenhouse is astounding this winter on cloudy days! My greenhouse is10mm twin wall poly and have experienced temp below 32*F only twice in the past Nov Dec when temps have been unseasonably cold below freezing. So not only is there reflective effects on increasing light but also on heat retention. This works so well, I'm thinking I will leave up permanently thinking this will work the same way in summer and with the increased light bouncing around I believe I can increase my shade cloth % to keep temps even cooler on those hot days. BTW I also wrapped this around a metal pet pen with plywood roof as a temporary coop to overwinter growing pullets/cockerels not quite ready to move into the main coop. The Reflective Foam Core has kept these young chickens cozy on brutal freezing nights.

United States on Dec 22, 2019