30 Amp, 10-Circuit EmerGen EGS107501G2 Manual Transfer Switch Kit by Connecticut Electric - 7500 Watts

By: ‎Connecticut Electric

The Connecticut Electric EGS107501G2KIT EmerGen Manual Transfer Switch Kit is a must-have for any portable generator. This 30 Amp, 10-Circuit kit is capable of powering 7500 Watts of electricity. It is designed with enclosures for the power inlet and transfer switches that can be used either indoors or outdoors, and is equipped with 2 pole circuits that allow for 240-volt circuits. The double throw rocker switches ensure that no power back feeding is possible. This product is known for its high-quality packaging, build, compatibility and design.

Key Features:

This Transfer Switch Kit is designed to provide a reliable power solution for all residential load centers, 10 circuit double throw rocker switches, and 240 volt circuits. Additionally, this kit is perfect for use with a backup generator inverter.
87
B2B Rating
78 reviews

Review rating details

Value for money
87
Sturdiness
92
Packaging
87
Overall satisfaction
90
Easy to install
96
Design
86
Customer support
79
Compatibility
87
Build quality
88

Pros and Cons

Pros
  • Designed enclosures of the power inlet and transfer switches to be used either indoors or outdoors
  • Equipped with 2 pole circuits that allow for 240-volt circuits
  • Double throw rocker switches absolutely eliminate the possibility of power back feeding
Cons
  • Inlet box may get rusted

Details of 30 Amp, 10-Circuit EmerGen EGS107501G2 Manual Transfer Switch Kit by Connecticut Electric - 7500 Watts

  • Customer Reviews: 4.6/5 stars of 1,217 ratings
  • Contact Material: ‎Alloy Steel
  • Color: ‎Grey
  • Upper Temperature Rating: ‎180 Degrees Fahrenheit
  • Unit Count: ‎1.0 Count
  • Contact Type: ‎Normally Closed
  • ASIN: B005FQJD7K
  • Connectivity Protocol: ‎X-10
  • Actuator Type: ‎Push Button
  • Item Package Quantity: ‎1
  • Item model number: ‎EGS107501G2KIT
  • Included Components: ‎Inlet Box
  • Number of Positions: ‎10
  • Item Weight: ‎30 pounds
  • Number of Items: ‎1
  • Item Dimensions LxWxH: ‎11.5 x 20.5 x 14.5 inches
  • Installation Method: ‎Outdoor
  • Current Rating: ‎30 Amps
  • Switch TypeRocker: Mounting TypePanel Mount
  • Power Source: ‎Corded Electric
  • Style: ‎Switch Kit
  • Is Discontinued By Manufacturer: ‎No
  • Terminal: ‎Spst
  • Manufacturer: ‎Connecticut Electric
  • Product Dimensions: ‎11.5 x 20.5 x 14.5 inches
  • Connector Type: ‎Plug In
  • Part Number: ‎EGS107501G2KIT
  • Wattage: ‎7500 watts
  • Circuit Type: ‎1-way
  • Batteries Required?: ‎No
  • Date First Available: August 5, 2011
  • International Protection Rating: ‎IP54
  • Operation Mode: ‎ON-OFF
  • Operating Voltage: ‎240 Volts
  • Warranty Description: ‎5-Year
  • Brand: ‎Connecticut Electric
  • Batteries Included?: ‎No
  • Best Sellers Rank: #22,725 in Patio, Lawn & Garden #8 in Outdoor Generator Transfer Switches

Comments

Dan: This is a great kit. I installed one on my last house (super easy self install). I told my friend to do one and how to install. And then when I moved I put one in my new house. Watertight, solid, easy to install and use. I love it in an emergency.

United States on Oct 09, 2023

Jaybird: This transfer switch has ten circuits for the same price as many six circuit switches. Very high quality box, wiring and breakers. Customizable for the routing of wiring bundle. This is a surface mount box but not configured to mount on wall studs with 16” Ctr to ctr. Box is too narrow. A wooden or metal plate mounted to studs must be used to mount the box to due to its weight. Metal self tapping hollow wall anchors could be used but I don’t trust them for a box this heavy especially with tugging on the wiring, etc while installing. I had to remove Sheetrock to run wire so I added additional 2x4’s to mount the box to when Sheetrock was replaced. Unless the transfer switch is mounted with only a stud separating it from the main breaker box virtually all of the wiring for the ten circuits will be too short. I had to mount the transfer switch approximately 16” from the main breaker box and all my wires are too short. Since the wires are run in conduit I am forced to splice onto each wire with an extension or pull the wires back through the conduit and install longer wires from each breaker in the transfer switch. This would also require disassembly of the transfer switch and...

United States on Jun 03, 2023

Jean Dumas: Faire attention à l'identification des cables au bon endroit mais en général c'est un excellent produit pour le prix !!!!!

Canada on Oct 20, 2021

Rita Crosbie: Impressive all round - 9 days pre Christmas from date of order to arrival in rural Nova Scotia. In perfect condition. As stated by others, a lot of kit for the money - appears solidly made and only fitted today but my experienced electrician was impressed and stated the switches looked decent - we'll see. Took about 4 hours to fit everything. Given that you can't get any electrical panels of any type locally at present and the price it really was a great deal. (Of note: 6 x 15 amp circuits 4 x 20 amps). Roll on the outages!

Canada on Dec 31, 2020

CustomerCA: There are a lot of items for the price (if you buy them separately and or other brands they are very expensive).
I didn't use it yet, but I did all the connection required. I am not sure yet if this is approved in the Canada, but it seems so (hard to find the information). The connection outside of the box (where the cables go through) was broken at the extremity during the shipping (I guess), I don't really care, but the product obviously was damaged.
All the other equipment was in very good condition. I think that some of the cables were a bit short (I had to swap my breakers to allow an easier connection between them ...)
Other than that it was easy to install, no french instruction though .. but it was not an issue either (for me).

Canada on Nov 23, 2020

Kindle Customer: Product is well made, a few things to know the wire length from transfer switch is forty two inches. Mistake in directions for 10 circuit switch is the knockout size in existing panel has to be one and a half inches not one and a quarter as stated in directions.

Canada on Jul 10, 2020

carl fulton: It was easy to install but should have had some wire nuts and a conduit to go through the wall also longer wires to put through the wall but all and all it is great and will work great thank you. CF

Canada on Dec 05, 2019

D. Richardson: Update for Sept 2020: Transfer switch has been working well when I have outages. Needed to use it the other day for a 30 hour outage. One of the rocker switches was not working. I contacted Connecticut Electric and they are sending me a new switch under warranty. Can't complain about that. It would be better if had not broken. I also bought an extra one. You can get replacements here on Amazon (https://www.amazon.com/gp/product/B01LYCWB8P/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1).

Did some reading that indicates these switches are prone to failure. I hope that's not the case. If you need to replace 10 of them that's almost the cost of a new transfer switch. I bought 2 new ones so I have have a spare. Leaving this at 5 stars. Losing 1 switch out of 10 after 5 years does not seem like a big issue.

Original review below:

Overall a very nice transfer switch that works as expected. As others have noted, it seems to be more solidly built than most others and less expensive. Installation is fairly straightforward and not difficult if you have basic wiring understanding or experience. It’s a matter of being comfortable getting into your electrical panel or...

United States on Aug 14, 2017

West Texas: I finally finished installing the switch today. What a pita. I'm not sure they should get away with calling this a kit. It has almost everything you need if your breaker panel is outside your house and is not flush mounted or if your breaker panel is inside your house, not flush mounted and you don't mind installing the generator power inlet inside your house rather than outside. Those configurations would allow you to install the switch without buying anything extra other than wire nuts. It's likely that your breaker panel is in the house and is flush mounted. This means purchasing a junction box and possibly other parts to complete connections between the switch and your breaker panel. (Or the flush mount kit which is difficult if not impossible to find.) Where will you be running your generator? Hopefully outside. This means the power inlet, which does come with the kit, needs to be installed outside unless you want to run the power cable from the generator to the transfer switch through an open window. Unless your breaker panel is on or very very near an outside wall, then you will need to purchase wire to lengthen the existing wires between the inlet and the transfer switch....

United States on Sep 03, 2016



30 Amp, 10-Circuit EmerGen EGS107501G2 Manual Transfer Switch Kit by Connecticut Electric - 7500 Watts Zulkit IP65 ABS Plastic Dustproof Waterproof Junction Box Project Enclosure with Fixed Ear - 3.9" x 2.68" x 1.97" - Black Heavy-Duty Weatherproof Multi-Purpose Enclosure by Amphenol Broadband Corporation - 9" x 9" x 4"
30 Amp, 10-Circuit EmerGen EGS107501G2 Manual Transfer Switch Kit by Connecticut Electric - 7500 Watts Zulkit IP65 ABS Plastic Dustproof Waterproof Junction Box Project Enclosure with Fixed Ear - 3.9" x 2.68" x 1.97" - Black Heavy-Duty Weatherproof Multi-Purpose Enclosure by Amphenol Broadband Corporation - 9" x 9" x 4"
B2B Rating
87
97
95
Sale off $89 OFF $4 OFF
Total Reviews 78 reviews 84 reviews 61 reviews
Customer Reviews 4.6/5 stars of 1,217 ratings 4.7/5 stars of 1,481 ratings
Contact Material ‎Alloy Steel
Color ‎Grey Black
Upper Temperature Rating ‎180 Degrees Fahrenheit
Unit Count ‎1.0 Count
Contact Type ‎Normally Closed
ASIN B005FQJD7K B07S6PKW2L
Connectivity Protocol ‎X-10
Actuator Type ‎Push Button
Item Package Quantity ‎1
Item model number ‎EGS107501G2KIT F-2
Included Components ‎Inlet Box
Number of Positions ‎10
Item Weight ‎30 pounds
Number of Items ‎1
Item Dimensions LxWxH ‎11.5 x 20.5 x 14.5 inches
Installation Method ‎Outdoor
Current Rating ‎30 Amps
Switch TypeRocker Mounting TypePanel Mount
Power Source ‎Corded Electric
Style ‎Switch Kit Compact
Is Discontinued By Manufacturer ‎No
Terminal ‎Spst
Manufacturer ‎Connecticut Electric Zulkit
Product Dimensions ‎11.5 x 20.5 x 14.5 inches
Connector Type ‎Plug In
Part Number ‎EGS107501G2KIT
Wattage ‎7500 watts
Circuit Type ‎1-way
Batteries Required? ‎No
Date First Available August 5, 2011 May 27, 2019
International Protection Rating ‎IP54
Operation Mode ‎ON-OFF
Operating Voltage ‎240 Volts
Warranty Description ‎5-Year
Brand ‎Connecticut Electric Zulkit
Batteries Included? ‎No
Best Sellers Rank #22,725 in Patio, Lawn & Garden #8 in Outdoor Generator Transfer Switches #8 in Electrical Boxes
Before you spend your money, check out our reviews. Every time.
Best2buy Newsletter
Don’t miss out on the hottest seasonal and trendy products. Subscribe to our newsletter today.
Don’t miss out on the hottest seasonal and trendy products. Subscribe to our newsletter today.