Premium Semi-Transparent Wood Stain for Decks, Fences, & Siding by SaverSystems - 1 Gallon (Light Walnut)

Lani Sutherland: I used this on an interior cement floor. Very easy to brush on and so far seems to hold. I'm guessing you need to reapply every year but I'll wait and see. Good value.

United States on Sep 22, 2023

Perry: Looks good and great coverage. Thanks

United States on Sep 06, 2023

krysta: This stuff is amazing I stained my fence and it looks so much better. Great for weather proofing as well

United States on Sep 05, 2023

Gaston Thivierge: La qualité de ce produit n'est pas de qualité espéré

Canada on Aug 26, 2022

Matt: I purchased all three steps products to refinish the deck on the house we just purchased. It is 30' x 30', so I ordered 5 gallons of the stain. The cleaner and the brightener worked great, plenty of both left over for the future. The stain ended up just barely enough to cover, mainly because about 1/3 of the deck is protected from the weather by an overhanging roofline and required much less stain to cover. Some of the most worn sections really soaked up the stain/waterproofer, so depending on your situation you will need to adjust how much stain to order. It says 100 to 150 square feet per gallon for two coats. If your deck has a lot of wear, calculate about 75 square feet per gallon. It also says the finish is flat, but I found that it has some sheen to it, especially over the less weathered sections. Application is easiest when you follow the directions by doing the second coat within about 15 minutes of application of the first coat. It covers more easily and dries better. Used dark walnut color due the deck being previously stained and the darker color made the whole deck more uniform in color while leaving the woodgrain to show through the stain. Don't know how this will...

United States on Sep 27, 2021

Troy: Bought this to stain my fence. A few things to help out others who might value this info as I couldn't seem to find any.

How much will you need?
I had 165 ft of brand new cedar fence (not sq ft) that needed to be stained on both sides (that would be 330 ft total in length). The fence is a staggered privacy fence that arches in the middle up to 6ft and the post are generally 4x4. I ended up buying 20 gallons of this stain to get the job done. Waited about 4 months to stain the fence after it was installed so I skipped the prep work and just power washed it and applied the stain. The fence would just absorb the stain. Note that applying this to a fence is no easy task and will take time, even with a pump sprayer + brush.

Some tips to help using this conservatively and not wasting as best you can.
If you wanna use this stuff as conservatively as you can like me to save money. I used a pump sprayer and found the best nozzle to use is an adjustable one. The recommended ones would just spray too much on there and a lot would drip off. At first 2 gallons would with two coats would be gone in just applying it to two sections of my fence. I switched out the nozzles to...

United States on Sep 27, 2019