Paintless Dent Repair Tools Kit - Super PDR for Professional Results

Dan R.: I was not real sure this would work because it seemed hard to believe that hot glue would hold strong enough to pull a dent out. It does! I had a fairly deep ding in my door after the grand kids slammed the other car door into it. I had tried suction cups and they did not pull the ding out. I tried this PDR Tool. Hot glued the small round puller plug to the top of the ding and used the spring loaded puller. Pulled back and forth for a few times and then increased the pressure a little. The puller then pulled the plug off the door leaving the dried glue on the door/ding. When I removed the dried glue I was amazed to see that about 75% of the ding was gone! I repeated this same procedure about 5 more times and each time it removed more of the ding. The ding is now completely out. I know where it was because there was a small chip of paint that was removed from the door banging. I used a scratch remover cream I got at the auto store and it cleaned up the glue marks and reduced the appearance of the scratch/missing paint. The creme put a new plastic coat over the area and the door looks very good. I pulled 3 dents out of my truck that had been there for a long time. One dent was about...

United States on Dec 02, 2023

James B. Lowe III: Great product. Excellent customer service. I ordered the wrong dent kit. Needed the dent puller that wasn’t part of the kit I ordered. They sent out the dent puller at no charge. Excellent company to do business with.

United States on Nov 28, 2023

Todd A Brown: I bought this kit to attempt to remove a dent from my brand new vehicle. While the instructions are a bit cryptic, it was relatively easy to figure out after watching multiple U-Tube videos, and I was semi-successful removing the dent. Removing all the adhesive is fairly difficult, even with their recommended solvent.

United States on Nov 09, 2023

Rubens: El producto es bueno, seria preferible aumentar la cantidad de pegamento con el respectivo costo. El instructivo es muy general; mejor buscar videos en Youtube. Cumple su cometido. Un tip, la lamina debe estar limpia, pulida y tibia para mejores resultados.

Mexico on Sep 17, 2022

Aaron Ely: This works pretty well on door dings and small dents, I haven’t tried it on a big dent yet. I’m no expert and happy with the results so far. Mine came with the old style tabs and the smaller tabs don’t stick very well when glued. The glue gun is terrible and failed within the first few dents. The tip was hot but the glue would not flow no matter hard I squeezed. I would like to contact the seller about mine having the old tabs and the useless glye gun but see no way to do so. If I had it to do over again I would look for an item that has some level of customer service as I can’t find it here. I wound up using my 30 yo craft glue gun and it works fine at only 40 watts. I ordered some rods to be able to work from the back side as well. Just pulling the dent and using the tap down tool gets close but have to work from the back side to get the fine detail. Overall pleased as I have nothing to compare it with and disappointed at the lack of customer service. For the price it does what I want it to do, not being a professional.

United States on Aug 01, 2022

Alexandre grisé: 👌

Canada on May 30, 2021

Pradeesh Jollan Mani: Doesn't work for me, I tried about 5 times and also used better glue gun than one that came with them, but the dent would not lift and the attachment would just come off, so not sure if it's worth, but maybe it will work for someone

Canada on Feb 03, 2021

Luigy: Es muy funcional

Mexico on Jan 08, 2021

Jason Clarke: Easy to use and works great

Canada on Sep 26, 2020

TVG: PROBLEM:
Our car had 5 fairly prominent body dings: Driver door (1), trunk lid (1), driver side rear wheel well (3).

THIS TOOL:
Product came packed extremely neatly and carefully. Very professional kit and includes a fairly complete set of the stuff you need.

PROCESS:
Degrease the dented area with alcohol.
Attach one or more of the provided tabs onto the door with hot glue.
Wait a few minutes for the glue to cool
Use the gold anodized puller tool to exert a smooth steady outward grasp on the tab and pull the dent.

HINT 1: Eventually, the glue fails, leaving a glob of hot glue on the car, but (hopefully) a smaller dent than before. You may need to repeat this process 2 or 3 times per dent.)
HINT 2: The hardest part of the whole process is getting the glob of hard glue gun glop off the car once you finish
HINT 3: Even glue removal is not that difficult. In between pulls, just get most of It using the scraper tool.
HINT 4: I found that if I coat the blob with liquid car wax, scraped off bits do not smear around and adhere again.
Like using peanut butter to remove chewing gum, the wax prevents the chunks from reattaching. Wipe again...

United States on Jan 27, 2020