Oshlun 5-1/2" 18 Tooth ATB Saw Blade with 5/8" Arbor & 1/2" & 10mm Bushings - Fast Cutting & Trimming

DENNIS MOUSER: Can't really answer any of the other questions because I only used it once. Accuracy seemed fine, and, I don't know how ling it will stay sharp.

United States on Sep 30, 2023

as you wish: The blade was very easy to install onto my Ryobi 5 1/2" circular saw using the provided adapter to fit the 3/8" bushing on the saw. The printed side of the blade faces inward towards the motor, the plain side faces outwards. I've only made one test cut so far, on a 2"x.5" piece of mdf casing. I remembered to turn the good side down as recommended for the best cut. I'm very very pleased with the quality of the cut--it's better than the factory cut. I can't speak yet to the longevity of the blade. Will update at a later date.

Canada on Sep 24, 2023

A. londono: I purchased this to cut vinyl planks floors, not really satisfied

United States on Sep 03, 2023

lisa: It does exactly what its supposed to do.

United States on Aug 12, 2023

Steves_Reviews: I'm a big believer in buying the best blades for a true cut, reduced kerf and minimal chipping out (depending on material used).
I have a 5" circular saw I use like many and finding blades for fine cuts here in Canada is no easy task. Also finding the correct size arbour is also an issue.
That said, this one is both of what I'm looking for, the brand I've not heard of prior and I'm happy to say, thus far it's proven to be a nice blade that does exactly as I wanted it for.
Balance also seems good no wobble, nice fit on the arbour and no chipping out, etc.
As far as longevity, I can't speak to that as I've only just got this blade and I don't use it all the time. I have it for specific cuts and materials but change back to my framing blade for general purpose.
Can I recommend this, well initially on price yes, longevity, can't say.
For $18 it's hard to say no if it cuts as required.

Canada on Aug 01, 2023

Amazon Customer: I purchased the 24 and 36 tooth versions of this blade and found them both to be excellent.
I have used these blades many times in the past and they have worked very well in cutting 1 x and 2 x wood stock. They cut with a clean edge and are very stable in my saws.
Note-----These blades in the 51/2 inch size have a 5/8 inch arbor hole!!! If your saw has a 1/2 inch or other sized blade shaft you will need to buy some blade arbor adaptors (don't worry they are easy to get and not very expensive. Amazon has these too.)
The pricing on these 51/2 inch blades is reasonable and the blades are of very good quality.

United States on Jun 18, 2023

Amazon Customer: Je suis satisfait de mon achat impeccable!

Canada on May 30, 2023

Gilles Laflamme: Très satisfait du produit qualité/prix

Canada on May 27, 2023

Shirley Keen: I've now used this blade for about 40 cuts or more. It's done well, but I do feel that it's slowing down some.
I would buy it again should I chose not to pay up for one of the top of the line blades. It is a lot better than the last 5.5" blade that I purchased. That one was bad in about 5 cuts.

United States on Feb 15, 2023

StealthSinghStealthSingh: I bought this blade for my Ryobi 18V P501 saw. It is fairly old saw, however it has been working perfectly for me, although I switched to 18V lithium batteries. The saw had 18 tooth blade, which for the most part was good, however I didn't quite get smooth cuts on plywood, which is understandable as 18 tooth is more for rippng rather than crosscut.
I came across this blade, while searching for 5 1/2" that had more teeth. The idea was more teeth are for crosscutting which will result in a smoother cut.
When I got the blade, I noticed it had some inserts also, which I later realized that I would need for installing the blade in my saw. In the attached picture you can see that it fit perfectly on the shaft. After first installing the blade and trying the cut, it literally smoked the wood right away. On the checking the blade direction, I realized it was in reverse direction. So I unscrewed and flipped the bladed(as in the attached picture) with printed side towards the saw motor and tried cutting again.

This time the cut was perfect and clean. Also in the pictures you can see the plyboard cut with this saw.

Also, wanted to mention as this saw has more(twice) the...

Canada on Jan 10, 2021