Christopher S. Cornette:
The three tools I use most are my impact driver, my drill, and my shop light. After years of moving them from home to home in the shop trying to keep them easy to get to, but out of the way... I had never found the perfect spot. Then I was building an extension to my peg board (from 5' to 8') and I happened upon this rack in the suggestions. I decided to give it a try, and I'm very happy with the results.
Most of the single tool hanging racks I've found wind up hanging them crooked, and they usually take up a ton of space for one tool. This rack fits three tools in a space I'd normally only be able to fit two. And it has storage for extra batteries up top. With the tools hanging, it takes up about 1/3 of a 16"x32" slotted peg board (you'll need a slot board, not just a peg board, or you'll need to route slots into a peg board). I use the steel boards that have pegs and slots, so no issue for me, but you should be aware before you buy. It has two rails that very securely fit the slots, and the rack hooks into the top rail and slides down into the bottom rail. It is very secure but can be taken down easily.
Most pistol grip battery powered...
United States on Nov 12, 2020
Zackdickary:
If you read the reviews of this holder you will see some people declaring that DeWalt drills don't fit, and others saying that they do. In fact, both reviews are sort of correct -- it depends on what voltage drill you are talking about.
This holder is perfect for the new 20V drills. The top battery racks fit the 20V batteries perfectly, and the drill itself fits just like it should. It's almost like they designed the holder for the newer drills.
The holder is also OK for the old 12V drills. The drills fit fine, as good as the 20V drills. The battery rack works OK for the 12V batteries, but it's clearly not designed for them, or any battery that has a connector that protrudes up into the handle of the drill. And that's where the trouble comes in.
The 18V DeWalt drills simply don't fit into this holder. The base of the drill where the battery meets and snaps into the drill is simply too wide to fit through the horizontal opening. The handle fits just fine in the bottom slot, but the battery just does not fit through the opening. Similarly, the 18V battery is too big for the top rack to hold.
So, if you have all new 20V DeWalt...
United States on Jul 06, 2020
oldOtteroldOtter: Wall Control is great. The metal peg board is clutch. Magnetic. Holds weight. Doesn’t break. Some of their accessories, like the slot hooks, tend to come out when removing tools. I opt in that instance for the heavy duty metal peg hooks from a different brand. That said, when it comes to Wall Control’s larger accessories like this drill holder, they are on point! Three drills takes up about the same real estate as a single drill on a more traditional hanging hook. I have a couple models of Ridgid, all fit great. To help others, I have an old Dewalt, that fits too. Both Ridgid and Dewalt batteries fit well. Check out the photos, I measured the openings to help you make sure your model will fit. The metal itself on this accessory seems thin and bendable out of the packaging. But once installed correctly, it’s pretty solid. Really happy with this!
United States on Jun 03, 2020
GW: Efficient and sturdy addition to Wall Control pegboard. The battery holder doesn't really fit my Dewalt batteries but beyond that, works great. Holds my drills as expected.
United States on May 30, 2020
Organize Your Power Tools with this Wall-Mounted Drill Holder and Storage Rack | Favbal Wall Mount Mop and Broom Holder: Keep Your Home Neat and Tidy | Heavy-Duty Wall-Mounted Mop and Broom Holder to Keep Your Home Neat and Tidy | |
---|---|---|---|
B2B Rating |
72
|
97
|
96
|
Sale off | $20 OFF | $5 OFF | |
Total Reviews | 20 reviews | 767 reviews | 464 reviews |
Product Dimensions | 3"D x 3"W x 1"H | 1.2"D x 1.6"W x 14.5"H | 1.8"D x 17"W x 2"H |
Number of Shelves | 1 | 3 | |
Material | Metal | Stainless Steel | Stainless Steel, Rubber,Metal |
Color | Black | Black | 16" Broom Holder |
Special Feature | Tool Storage, Tool Organizer, Wall Tool Storage, Tool Storage and Organization | Mop Handle, Utility Racks, Utility Hooks, Garage Storage System Hooks, Industrial Hooks | Holder, Space saving |
Emory C. Gilbert: I have been eyeing this for some time now. Man, was I missing out. I finally ordered one and it works very well holding 3 Ridgid drill/drivers with the batteries. It's almost like it was made for them, perfect fit. Should've ordered this long ago. The holder keeps my drills off of the work area nice and organized.
United States on Jul 19, 2021