MULWARK 3-in-1 8 AWG to 30 AWG Self-Adjusting Electrical Wire Stripper Cutter Crimper Multi Pliers Tool

R. Scaffidi: I've been messing with electronics for over 50 years and I just found out about these. They work great! I've tried them on just about every type of wire out there and was successful with each.

United States on Oct 04, 2023

Railroad: Works excellent on 6&4 gauge wire

United States on Sep 29, 2023

Vivek: This tool was a great help when I was trying to hand pendant light on my kitchen island. It does so many things that I didn’t have to have multiple tools. I would recommend it to anyone trying to work with electrical wires.

United States on Sep 26, 2023

Clifford S.: The item worked as expected but it would have been nice if it had some direction or how to use special features.

United States on Aug 07, 2023

UkJohn: This works well so far for automotive and home DIY use.
Says it comes with two replacement blades and springs however it only has one of each so if both cutting blades are dull you are out of luck.

United States on Aug 04, 2023

Amazon Customer: Best built wire stripper/cutter/crimper out there ... bar none. Included spare parts a bonus. Original went missing and within a week I replaced the Bulwark 3. Took the tool for granted over the years until it went missing ... I have no problem recommending this product with a 5 star rating.

Canada on Mar 11, 2023

PlorPlor: As another client outlined, the yellow cutting gauge is not useful. More, it is annoying when the tool is in the tool pot! As it can be seen in the image 0769, it is fixed down, out of way. Also, it can be seen on the same photo that when aligning the wire on the edge of the jaw, it gives a good almost ¾ of an inch of bare wire as shown in #0770 photo. If longer is required, it is easy to measure visually from this edge and it gives ½ of an inch of bare wire as shown on photo #771. A design to be review! Finally, the tool is a bit stiff!

Canada on Nov 28, 2022

Rafeek Mikhael: Pros:
1) It is really easy to use. It cut my stripping time by like 80%!
2) It looks and feels sturdy
3) I could use it on wires as thick as a thermostat wire (with 5 wires inside) and as thin as a 28G wire. It tends to be less impressive at those extremes, though. For the thick wire it sometimes fails to completely cut the plastic, and for the thin wire it sometimes pushes the insulating plastic away from the tip you want to strip, resulting in a longer stripped end. With an old telephone cable (3 wires inside), it sometimes injured the insulation on one of the internal wires when I stripped the outer insulation.
4) It came with spare cutting blades and spring. To me, this is a big plus.

Cons:
1) The plastic wire stop protrudes a bit when you take it out of the way. I think it could have been designed a little bit better. This is a minor issue, though.

I have not tested much the crimping function, but it seems to be OK. Generally, I believe that it would be a great tool if you are working with wires that are neither too thin nor too thick.

Canada on Sep 23, 2022