MaxWorks 80854 Polypropylene Moving Cart for Heavy Loads

OscarodelapeñaR: todo lo esperado

Mexico on Dec 18, 2023

james hanna: Good product for your need.

Canada on Dec 09, 2023

EastALEastAL: We use ours to move our lemon trees in and out of the garage during winter when nighttime temps get too low. Lasts a lot longer than the wooden dolly we used previously.

United States on Dec 07, 2023

Andrea Susan Glass: This is a nice and sturdy cart but very difficult to put together. It took two of us and we even got the feet on the wrong way but it was too difficult to take off and fix.

United States on Dec 02, 2023

termite: I like the size, weight and ease of use. It works like it's supposed to and durable. I have six of these and will be ordering a couple more. There are some small challenges putting them together otherwise I would give five stars. No worries though. You will need a 10 mm wrench or socket ( which is what I used ). Insert bolt through the top to the bottom. There are cut outs for the hex head to fit into inside the hole that will hold that end for you. You may have to wriggle the threaded end around a little for it to fall or push into place. I used my finger to assist in pushing it into that position. Place caster wheel over the threaded end of the bolt on bottom. Spin nut onto threaded end with flat side towards dolly. The nuts are nylon self locking so the will tighten up and need to be wrenched on to completely secure wheel to the bottom of the dolly. Make sure to get all four bolts and nuts started before fully tightening to ensure easier fitting of bolts through all holes.
I was actually putting all four through before placing the caster wheel on and holding them in place with my fingers inserted into the four holes and then turning the nut onto each...

United States on Nov 05, 2023

bellanapoli: Once the product is assembled....but wait....it is very difficult to assemble. Why? Because the screws which are supposed to stay firmly in the predrilled holes of the platform keep falling out of the holes. The instructions tell you to put the screws in, then turn the platform upside down, at which point the screws all fall out of the holes before you can attach them to the wheels. The manufacturer should have paid for better engineering.

You virtually need three people to assemble this. One to hold the screw in the hole so it does not fall out. One to take the nut and fasten it to the screw through the hole in the wheel (more on this later) and one to hold the tiny adjustable wrench. As for the wheels, the nuts to the 2 swivel wheels, which are attached in front of the platform, are not hard to screw in once the screw is held in place. However, the holes drilled into the 2 non swivel wheels which are attached to the the rear of the platform are very hard to tighten because the holes in the wheels are drilled to close to the wheels making it very hard for the wrench to grasp the nut. I had to use a special tool, which held the screws in place, to tighten...

United States on Mar 04, 2023

JohnJohn: Having 2 holes right in the middle of the platform is a serious weak point and I'm not sure why it's even there.

Australia on Jul 26, 2022

Puccinidiva: Bought this trolley to put the toilet on while I was doing the bathroom floors. Surprisingly tough (no bowing) and the big wheels mover smoothly even with the weight on.

Canada on May 14, 2021

Bobby W.: First, this item arrived at my house via USPS in a carton that looked like it had been through WWIII, and the dolly itself was in fine shape, so I took that as a good sign.

This is a small platform dolly - surface is only about 14" x 18". I am using this to make it easier to move my 50lb 'portable' compressor around my house, and it does a fine job- rolls reasonably well, and even made it over some uneven pavement without too much hassle. So for my specific purpose, this is a win so far.

Pluses:
Price seems fair for what it is.
Lighter weight than a wooden dolly.
Has a handle slot to make it even easier to carry.
Has two small holes on the front and backside edges, so if you wanted, you could rig up a rope to pull it.
The platform isn't smooth, it has a bit of a texture, sort-of like a shallow automobile floor mat, so that should help keep your load from sliding around.

Minuses:
Only two wheels rotate 360 degrees, the other two are fixed - some may not like this. You have to learn how to "drive" this dolly to maneuver it around, but it's easy once you get the hang of it. It does stay put though.
The wheels themselves...

United States on Oct 03, 2020

Moises: excelente articulo para mover cosas pesadas con granfacilidad; lo utilice para poder mover de un lugar a otro cajas grandes y algo pesadas.

Mexico on Jul 16, 2020