KES Vessel Sink Drain Pop-Up Drain with Overflow and Bathroom Stopper Assembly

Craig J.: With the most basic plumbing know how (can you turn a wrench? Yes? Then you’ve got it) this replaced a drain cover that didn’t allow the sink to drain well. Quick job, the house hasn’t flooded, and the wife is happy! Win all around with this product.

United States on Dec 20, 2023

Paul : Exactly as described, quality materials.

Canada on Dec 08, 2023

MannyManny: Originally, I needed just a seal to stop the leakage under the sink bit upon installing the new piece, I verified the old piping needed a complete replacement from top to bottom. I'm glad I found this and soo happy it was an easy install, highly recommend if you have my type of sink as illustrated in my pictures above! The size is a direct replacement and the quality of the part I'd surprisingly very good!!!

United States on Nov 29, 2023

Lucía: Buena calidad y estetica

Mexico on Nov 21, 2023

B.: einfache Montage, schnelle Lieferung, tolles Design, grosser Nutzen.

Germany on Dec 10, 2022

FrancescoFrancesco:

Italy on Mar 30, 2022

Sail4sure: In the end, everything got installed with no water leaks. It’s a nice look and fits together snugly.
As others have suggested in their reviews, I assembled the pop up drain assembly and it started leaking. So, I took it all apart, and closely examined each part. It turns out the silicon gasket immediately under the pop up drain was affixed backwards initially. I reversed it and put everything back together, and this time no leaks. The kit includes some Teflon tape. I’ve always been told my plumbers that one can never go wrong with Teflon tape, so I used it on all the metal threads, which I’m sure helped. Also, it’s good to snug everything down I used channel lock pliers, and they put all the fittings together like a charm. I have installed KES drain parts before and they are reliable and work. For those that don’t think there are any instructions, that isn’t true. There was a small folded set of instructions that explained how the parts all fit together and there is also an illustration on the Amazon web page. It’s one of the things that drew me to the KES products in the first place - in the past, I have ordered plumbing parts and as I’m...

Canada on Mar 20, 2022

Epic ReviewEpic Review: This is a a very good product. I bought a matte black Kohler faucet and drain set. I decided to keep the faucet, because worked great and fit in with my bathroom, but the drain assembly was problematic. The Kohler drain assembly had more plastic parts and leaked slightly no matter how tight I put it on. I'm not sure why the Kohler leaked, but my best guess was poor design and manufacturing of the drain (top diameter was warped and did not sit flush in the sink) and the foam gasket didn't seem to do the job. I was frustrated and didn't want to return the entire set, so I did my research and this product showed up.

This product was comprised of more metallic parts and seemed sturdier than any drain I ever installed. The best of part is that I didn't used any tools to install it. The gaskets were all rubber or TPU. The pipe and drain valve are metal.

Installation tips: Do a dry install and see where the washer lines up and teflon tape a few thread above and below. Then do the full install and hand tighten. Because of the teflon it will be water tight and no need to over tighten with tools. No leaks at all and works very well! Took about 10 minutes to...

United States on Oct 06, 2021

mushoku: Installed this almost 3 weeks ago. So far, great product. Plunger is really wide from what we're used to (push/pull-rod style), which takes a little getting used to.

Install note: Our sink drain opening (the hole in the bottom of the sink) was 1-5/8" (1.625"). This product states that it requires at least 1-3/5" (1.6"). When I dry-fitted this, I had to screw it into the opening. If barely fit, and would not slide in dry. I applied teflon paste to the threads to both lubricate for install and seal post-install, and it slipped right in. The teflon paste also provided an extra level of seal for the teflon ring without any extra height (see con below). I applied teflon paste to the threads where bottom seal went prior to screwing that into place, as well. Zero leakage.

Pros: It works, all-metal body
Cons:
- has around 1/16" - 3/32" rise higher than level with the bottom of the sink, so a small amount of water remains. Not a huge deal, just an annoyance having to run extra water to rinse anything down that remains in the pooled water
- slightly slow drain, with a work-around, and a problem with the work-around. Start with an "empty"...

United States on Nov 01, 2017

SevenMichael: I ordered two of these, one bronze the other brushed nickel. I incorrectly ordered the brushed nickel without overflow, so I had to return it for this one with overflow. These are excellent quality items in both material and finishes, and the price is great. I've already installed both.

Although there are no instructions with the item, it's very easy and straight-forward. For any first timer, you can find a you-tube video to tell you how.

My problem was my existing vanity sinks came with a regular "screen" type drain cover (i.e., 19-hole strainer), and as with many vanity sinks, it took a long time to drain or you had to help it by rubbing your finger over the top of the drain.

I researched the issue and did not want to have to install a vent under my small sink, so I went with the stopper approach. This works great ! it reduces the splatter when the water is running, and it drains immediately because the stopper creates a vortex effect in the drain preventing the air from being trapped.

So, this is the solution if you have a vanity sink that isn't draining properly or quickly. I should note that it comes with 2 rubber seals. ...

United States on Jan 16, 2017