Hunter Crestfield 52" Low Profile Indoor Ceiling Fan - Perfect for Any Room!

T. PerryT. Perry: I've installed a number of fans over the decades and they keep getting easier to do. This one was a breeze to install. The wiring is flexible, too. In my case, I already had the wiring to a light dimmer switch and a fan speed control on the wall, and it all works perfectly, controlling both fan speed & light brightness. But if you only have one switch-or no switch, it can handle that too and you'll just use the pull chains. We didn't use the blubs that come in the box, choosing some 60W equivalent (6W) 3000K Edison bulbs that look great and also are very bright at full blast. Sometimes my wife wants a lot of light on those dark winter days and this amps it up like a bright operating room. And these bulbs look perfect in there as seen in the pic. The blades are reversible and we chose to see the white side and not the wood grain.

We've had it a month now and it's very quiet, moves air nicely and is vastly superior to the 20-year-old builder-grade fan that it replaced. We're very happy with this and we wonder, why didn't we replace it sooner?

United States on Aug 19, 2023

steyoga Engussteyoga Engus: - These ceiling fan blades are snap-on only, so no screws to tighten them, so after 1 week after the installation, 2 units out of 4 have sagged blades (i.e. the blades could fly off the unit at any time and potentially hit someone)!!!
- My chat w a rep from HunterFan.com confirmed that this is a manufactured defect and they will send 10 new blades within 6-8 weeks!!!
- 6-8 weeks during the summer, the hottest season in Canada, when temperatures could go as high as 100 F or 38 Celsius!!!
- This is unacceptable as a waiting period to get blades' replacement.
So if you don't want this kind of stupid problem, please don't buy any snap-on blades from ceiling fan companies.

Canada on Jul 18, 2023

ARNOLD RYDBERG JR: I HAD MY FAN INSTALLED , BECAUSE I AM UNABLE . IT WENT UP FLAWLESSLY , WORKS GREAT , EASE OF INSTALL , AND BEAUTIFUL UNIT !!! HUNTER FAN , AS ALWAYS , BEST SERVICE AND PRICE , HERE ON AMAZON !!! BIG A , IN IOWA .

United States on Jul 10, 2023

Andres: I had a small issue installing this fan. It was making some weird clicking noise. When I uninstalled it, I found that one ground wire was touching the rotating gear. Once I fixed the position of the wire, and reassembled it, it became really quiet. I am very happy that this was the solution to the problem.

United States on May 01, 2023

CatieCatie: We love these fans! From a practical standpoint, we were looking for pull chain (not remote-controlled) fans that were flush mount, and had open shades to easily change light bulbs. Not only did these fans check all the boxes, but they’re whisper quiet, affordable, move a lot of air, and they’re aesthetic, too! We did professional installation by a contracting company and the installer complimented the quality. They’re the perfect size for our 10’x12’ bedrooms, and I would absolutely buy again in a heartbeat.

United States on Apr 15, 2023

Kerry: This fan exceeded my expectations, it was easy to install and its very quiet.

Canada on Nov 02, 2022

Annie Labelle: Je suis très satisfaite de ce ventilateur. Très beau et très pratique quand il fait chaud.

Canada on Sep 24, 2022

snookssnooks: The media could not be loaded.  I purchased three Hunter Crestfield 52" Low Profile fans here on Amazon. Two have brushed nickel housing, and one has white. These fans were installed on the second level of our home, where the ceilings are 8'.

I hired a master electrician to do the installation. He did the installation correctly and used all required screws. Upon completion and inspection, my first reaction was total disappointment. First, when looking at the fan from across the room, I can easily see the protruding "blade iron posts" on the top of each blade. Each blade comes with three rubber grommet holes, and the blade iron posts on the blade arms are snapped into these grommets instead of being screwed in. There is no way to adjust the fit on these, they just snap in and that's it. When looking at these blade iron posts from above (see photo), they appear to be Phillips head screws. That said, these are factory installed to the blade arm and there is no way to tighten them. There is play in the grommet closest to the motor housing, and this causes the blades to sag. While this does not affect the operation of the fan, it’s one of the first things I noticed....

United States on Aug 20, 2022

Joy: I absolutely love this fan! Looks so good! AND it is sooooooooo quiet! I forget it’s on.

Canada on May 09, 2022

Annette Mitton: When being installed we needed more then 1 person to help put it up, compare to other ceiling fan lights. Love the flush mount look. Very beautiful.

Canada on Mar 09, 2022