Gardus RLE202 LintEater Rotary Dryer Vent Cleaning System - Remove Lint & Debris from Your Dryer Vent for Improved Airflow & Efficiency

By: ‎Gardus

The Gardus RLE202 LintEater Rotary Dryer Vent Cleaning System is the best commercial lint remover on the market. It's easy to use and provides overall satisfaction and battery efficiency. The system is built with high-quality materials and includes bonus lint trap brush, blockage removal tool, vacuum and dryer adapters. It can extend up to 12 feet with four flexible 3-rod pieces.

Key Features:

Are you looking for the best dryer vent system for your home? Look no further! Our Dryer Vent System comes with a bonus lint trap brush, a flexible 3 rod linteater rotary dryer vent cleaning system, and a vacuum adapter. This system is perfect for keeping your dryer vent clean and free of lint. Buy today and keep your home safe and efficient.
97
B2B Rating
2 reviews

Review rating details

Easy to use
97
Overall satisfaction
95
Customer support
93
Design
94
Efficiency
92
Build quality
94
Value for money
93
Sturdiness
92
Battery efficiency
94
Packaging
92

Pros and Cons

Pros
  • Effectively removes dangerous lint buildup in almost every type of dryer vent
  • Reduce drying times and save money on utility bills while ensuring safety of the home
  • Exceptional reach makes it a snap to clean behind, underneath and all around the appliances
Cons
  • Poles may be too short in length

Details of Gardus RLE202 LintEater Rotary Dryer Vent Cleaning System - Remove Lint & Debris from Your Dryer Vent for Improved Airflow & Efficiency

  • Is Discontinued By Manufacturer: ‎No
  • International Shipping: This item can be shipped to select countries outside of the U.S. Learn More
  • Access Location: ‎Top Load
  • Item Dimensions LxWxH: 18 x 4 x 4 inches
  • Material Type: ‎Plastic
  • Product Dimensions: ‎2.5"D x 2.5"W x 144"H
  • Color: ‎White ,Grey, Black
  • Capacity: ‎0.3 Pounds
  • Domestic Shipping: Item can be shipped within U.S.
  • Best Sellers Rank: #5,557 in Industrial & Scientific #11 in Commercial Lint Removers
  • Customer Reviews: 4.6/5 stars of 5,557 ratings
  • Batteries Required?: ‎No
  • Brand: ‎Gardus
  • Max Spin Speed: ‎300 RPM
  • Model Info: ‎RLE202
  • Material: ‎Plastic
  • Handle Material: ‎Metal
  • Country of Origin: ‎China
  • Item Weight: ‎2 pounds
  • ASIN: B0014CN8Y8
  • Part Number: ‎RLE202
  • Item model number: ‎RLE202
  • Brand Name: ‎Gardus
  • Batteries Included?: ‎No
  • Operation Mode: ‎Manual
  • Date First Available: April 6, 2004

Video for this product

Comments

homer: I watched a YouTube video to see how this was done. This product did the job flawlessly. I did have to buy some extension rods due to the length of the ducts.

United States on Sep 11, 2023

Phil CPhil C: Saw this on a YouTube video or 2. My dad vacuums his dryer vent every few months and I want to see how much more comes out using this lint scrubber.

I was not expecting this much lint to be up there.

Have 2 sets of plyers ready to unbind the screw joints when you are removing the poles, and you might need it for the drill adapter. Attach the poles as you feed them, not beforehand; I removed them in the same manor.

Pro version might be well worth it so you don't have to unscrew bound poles or worry about reversing your drill by accident

There was no way I was going on the roof, so glad this system will accommodate that with the vacuum and ground floor method.

United States on Aug 06, 2023

Azimuth: Works like advertised. Pulled out 20 years worth of lint. I could weave an Indian blanket with what came out of the vent.

Canada on Apr 14, 2023

Honest Opine: The extension was delivered and the item received is as described. The extension helps with that dryer duct that is longer, my dryer is on the second floor and the duct runs to the roof with a few turns snaking through the attic. This will ensure a long enough run is clear of lint to provide dryer efficiency.

Canada on Dec 13, 2021

Jarrett CogginJarrett Coggin: Recently purchased an old house and due to some of the choices made by previous owners (quick and dirty paint jobs, cheapest option on a number of "upgrades", etc.), I thought that I might need to clean the dryer vent. This was later confirmed after about a month in the new place when it was taking us multiple cycles to dry clothes in the dryer I had purchased.

I was initially a little nervous to clean the dryer vent myself, but it felt like bringing someone out would be a like asking a car mechanic to build a Ford Mustang lego set. So, I did a little research on YouTube and came across a video that mentioned this specific product. I figured for the price it was worth a shot, and if things went terribly, I could still bring someone out.

I am so glad I did this myself! The whole process took about two hours, but that was due to the complexity of the situation (and fighting with the flex duct to connect the dryer back to the dryer vent). The dryer vent I cleaned out is over 30 feet long with THREE right angle turns in the vent. I bought a couple of sets of compatible extension rods for this kit as well.

Using this vent cleaner was very easy! I turned off the gas...

United States on Jul 28, 2021

Darryl: Our dryer is located on the second floor and this is where I started. The vent is a 90 degree downward turn followed by another immediate 90 degree turn (both metal) towards the outside wall. The overall length of the foil vent (straight run) is 20 feet.

After cleaning a length of 9 feet I went outside to finish cleaning the vent, but it was blocked and I couldn’t use the full 12 feet of cleaning rods. I confirmed it was blocked using an electric leaf blower so I went back in the house and started the cleaning process again and the brush cleared the blockage.

We used the leaf blower again and the airflow was amazing. We cleaned out so much lint it was scary, almost a plastic shopping bag full.

Key points when using this. I used Loctite on the thread for the brush and the small set screw. All rods were secured using two sets of pliers and electrical tape. Be careful not to over tighten. The drill was operated on a very slow setting and a shop vac attached to the adapter worked great. I also pulled back on the brush why operating the drill.

I’m very happy with my purchase.

Canada on Mar 13, 2021

b fast: I just finished cleaning two long dryer ducts. Both had elbows. One had a section of metal flex hose. I was impressed at how this thing slinked around the elbows and flex hose. It wasn't like you didn't notice them, but with a reasonably small amount of cajoling it would go through. That's the good part.

However:
1 - The vacuum adapter didn't fit my shop vac. Even the size adjusting ring was far too large. I had to fiddle to get a solution (Big blob of duct tape at the end of my vacuum hose.)
2 - Whether it is the segments or the little drill adapter, these things could not be unthreaded by hand. Separating these segments after use required two pairs of pliers. I wish for a hex nut face on each of the metal ends so I could use small wrenches instead. It would be doubly nice if they then included two super-cheap wrenches.

For totally doing what it claims -- 5 stars.
For requiring two pairs of pliers to use it -- minus 1 star.

Canada on Sep 30, 2020

LarillionLarillion: I just finished cleaning my duct and it worked amazing. I had a 90 degree bend right at the beginning and it handled it well. My duct was about 30’ long as well and I bought the extension kit. With that, I was able to just barely reach the end and it succeeded. Before and after pictures posted. Now, here’s the details:
1- Never ever ever put the thing in reverse, especially if you get stuck. You could open one of the junctions and your parts would be stuck in the vent. So you always go forward.
2- The rods should always stay straight. If they begin to twist up and bend, stop immediately. If it goes too far, you can bend a rod so bad that it’s almost useless. I did that.
3 - Use the thinner brush to get through hard parts first and then the full duct width brush to clean everything up after.
4 - Keep a pair of pliers handy. You will need them to help disconnect a section after it’s been drilled tightly.
5 - Go slow. If it binds up, pull back and move ahead slowly. If you can get past a spot, pull it all out because you likely have a massive amount of lint.

All in all, it worked amazing. I cleaned my 30’ duct for the first time in 20 years since the...

Canada on Mar 14, 2019

toybiztoybiz: Dryer lint, who would have thought or gave it any? Just like any other appliance, like our cars, We just put in the key, fill up some gas or plug it in when you remember to and go about our merry way right? Who would have thought appliances we take for granted need maintenance? The audacity of it all right?

Well, when it comes to your car, you don't maintain it, it stops running. With your dryer, you don't maintain it, well, you don't maintain it. Clothes take longer to dry and for some mysterious reason, the metal cabinet get much warmer than before, or so your think. Who checks how warm their dry cabinet gets right? In the Winter, its a plus to have this additional source of heat.

This would be in a fantasy world, you know that one that someone else takes care of everything for you. The last time I had that I was living with my parents and a very long time ago. So let's get down to why you NEED to do this maintenance. Lint - tiny bits of fiber from your clothing that break off during the drying process and blows out that vent pipe connected to the back of your dryer. When everything is shiny and new, most of it probably blows out into the atmosphere or onto your...

United States on May 31, 2018



Gardus RLE202 LintEater Rotary Dryer Vent Cleaning System - Remove Lint & Debris from Your Dryer Vent for Improved Airflow & Efficiency Bymore Fabric Shaver, Lint Remover & Defuzzer for Clothes - Perfect for Sweaters & Other Garments BEAUTURAL Electric Fabric Shaver and Lint Remover - Quickly and Easily Refresh Your Clothes and Upholstery
Gardus RLE202 LintEater Rotary Dryer Vent Cleaning System - Remove Lint & Debris from Your Dryer Vent for Improved Airflow & Efficiency Bymore Fabric Shaver, Lint Remover & Defuzzer for Clothes - Perfect for Sweaters & Other Garments BEAUTURAL Electric Fabric Shaver and Lint Remover - Quickly and Easily Refresh Your Clothes and Upholstery
B2B Rating
97
96
94
Sale off $26 OFF $3 OFF
Total Reviews 2 reviews 1 reviews 4 reviews
Is Discontinued By Manufacturer ‎No No
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Access Location ‎Top Load
Item Dimensions LxWxH 18 x 4 x 4 inches 5.75 x 2.6 x 2.64 inches 3.8 x 2.9 x 6.1 inches
Material Type ‎Plastic
Product Dimensions ‎2.5"D x 2.5"W x 144"H 2.6"D x 2.64"W x 5.75"H 3.8 x 2.9 x 6.1 inches
Color ‎White ,Grey, Black Gray Gray
Capacity ‎0.3 Pounds
Domestic Shipping Item can be shipped within U.S.
Best Sellers Rank #5,557 in Industrial & Scientific #11 in Commercial Lint Removers #18 in Industrial & Scientific #1 in Commercial Lint Removers
Customer Reviews 4.6/5 stars of 5,557 ratings 4.5/5 stars of 113,393 ratings
Batteries Required? ‎No
Brand ‎Gardus Bymore BEAUTURAL
Max Spin Speed ‎300 RPM
Model Info ‎RLE202
Material ‎Metal Alloy Steel Plastic
Handle Material ‎Metal Alloy Steel
Country of Origin ‎China
Item Weight ‎2 pounds 5.8 ounces
ASIN B0014CN8Y8 B08CX43PWS B01NAQD0KD
Part Number ‎RLE202
Item model number ‎RLE202 SN9088 719NA-0001
Brand Name ‎Gardus
Batteries Included? ‎No
Operation Mode ‎Manual Manual Automatic
Date First Available April 6, 2004 October 9, 2020 January 9, 2017
Before you spend your money, check out our reviews. Every time.
Best2buy Newsletter
Don’t miss out on the hottest seasonal and trendy products. Subscribe to our newsletter today.
Don’t miss out on the hottest seasonal and trendy products. Subscribe to our newsletter today.