FOKOOS Odin-5 F3 Foldable FDM 3D Printer: Fast and Reliable Printing for Your Projects

Shawn Astels: This is a great product, I am very satisfied with it.

Canada on Jul 10, 2023

Christo: Der Drucker hat ein großes und klares Problem: Qualitätskontrolle. Ich habe 2 Drucker mittlerweile gesehen und in allen waren einige bis alle Räder entweder schlecht produziert, oder schlecht gelagert. Das ist so schon nicht ideal aber besonders schlecht für Anfänger.

Der Drucker wird vor allem in vielen Youtube Videos als Anfängerfreundlich beschrieben. Das stimmt da man den Drucker nicht erst zusammenbauen muss, ist aber genau dann nicht richtig wenn man den erst auseinander bauen muss um Teile zu tauschen. Wenn man als Anfänger auch noch nicht weiß woran ein Problem liegen könnte ist das schnell frustrierend.
Wenn bei euch was am Anfang was nicht klappt würde ich empfehlen die Räder zu Prüfen. Der "Reifen" sollte nicht sehr locker auf dem Rad sitzen. Leider enthält das Ersatzteil Kit nicht genau so viele Röder wie an dem Drucker verbaut sind, sondern 1 Rad weniger...

In Sachen Konstruktion ist der Drucker aber dankbarer Weise so konstruiert, dass das recht einfach ist sowas zu tauschen. Auch das beiliegende Werkzeug reicht für alle Standartaktivitäten.

Kann man den Drucker empfehlen? Ja, bei 170-180€ für die der zu haben war druckt es...

Germany on Dec 06, 2022

trionictrionic: The media could not be loaded.  Como las características tecnicas ya se encuentran listadas en el producto, y tampoco soy un experto, comento los principales aspectos que te podrían hacer odiar una impresora y como se comporta en ellos esta fokoos Odin :

1. Montaje/configuración: cuanto tiempo necesitaré hasta imprimir algo decente? Se nivela rápido la cama? Cuantos tornillos tengo que apretar? La realidad es que en menos de una hora ya habrás hecho tu primera impresión. Un paseo por el parque, y mas al compararlo con otras impresoras del rango de precios (como por ejemplo una creality ender 3)

2. Impresión: adjunto algunos ejemplos de impresor 3d newbie. Me ha sorprendido la calidad, y el poder imprimir sin problemas desde el minuto cero con TPU (ventaja del direct extruder). Por cierto, olvidate de volver a comprar una funda para el móvil!

Y el ruido súper moderado, así que la puedes dejar imprimiendo en la habitación próxima al dormitorio y sin problema.

3: Y si algo falla?: al investigar en reddit antes de la compra, leí bastantes historias de terror del servicio técnico de otras marcas, aspecto que valoraban positivamente en...

Spain on Aug 24, 2022

Amazon Customer: This is a new review of the Fokoos Odin 5. Firstly I wan to state that the customer support was excellent. I received the THIRD unit FREE from Donie after we had a discussion re. my poor initial review of TWO units purchased previously that BOTH were DOA.
New unit went together OK and printed well right out of the box.
I then went to do firmware upgrade and the problems began. I sent a long email to Fokoos - KEN - which is the bulk of the following review. I guess I am a glutton for punishment to try a third unit.
Hello As of right now the review I will give the FOKOOS is exactly as follows:  ONE STAR IS TOO MUCH for this piece of S^&T unit. The 3rd unit sent (TWO units purchased thru AMAZON were both DOA due to poor manufacturing) to me by Donie worked great when printing the Fokoos items pre installed on the micro SD card. After finding how to get other items to print from the card, prints were OK for 2 days. It was  an error in the file structure of the micro SD card-  it did  NOT have  A Gcode folder  to load files into! I was able to download a full set of Fokoos files and used another card to reboot and load into the machine. New...

United States on Mar 28, 2022

mark s: I bought this printer as a replacement for my trusty old Wanhao Duplicator i3 Plus which I inadvertantly killed during routine maintanence.

At first I was a bit apprehensive about buying a new 3d printer, however this model had good reviews so I decided to take a chance, and I must say I have no regrets whatsoever.

This is a great little machine especially when considering the price.

I have tested it using both PLA and TPU filament and both worked fantastically well, flexible filaments such as TPU can be a bit tricky to work with but this printer handled it with ease, pint quality was excellent with both materials.

The build quality of this machine is very good, construction is sturdy and well designed.

It just worked for me straight out of the box without any need to tweak anything, setup consisted of screwing in 4 bolts and connecting 2 ribbon cables, which took all of 10 minutes.

This printer comes with everything you need to get started including all the tools you will need plus replacement nozzles and ribbon cables and even a 250 gram reel of filament which is a very generous package considering the price.

The print bed is very...

United Kingdom on Mar 04, 2022

SMH17: Ho aspettato alcuni mesi prima di scrivere questa recensione. Il prodotto corrisponde alla descrizione. La confezione è d'impatto, massiccia, stampata esternamente con la descrizione e le immagini del prodotto, ha un pratico manico per renderne facile il trasporto ed è completa di tanti accessori che elenco di seguito:
- 250gr di filamento PLA bianco sigillato
- raschietto in metallo
- ribbon cable di ricambio
- 2 augelli di ricambio
- una cesoia per tagliare il filamento
- chiavi a brugola di varie dimensioni e chiave piatta
- aghi per pulizia augello
- microsd
Con un packaging così straordinariamente completo, stranamente però non sono state incluse delle rondelle/guarnizioni per le viti di fissaggio, non una cosa strettamente necessaria, ma utile a migliorare il serraggio senza graffiare la superfice d'alloggiamento, soprattutto se uno non vuole tenerla sempre montata ma ripiegarla all'occorrenza.
Per renderla pronta all'uso basta disinballarla, mettere in verticale la parte pieghevole, inserire le viti di fissaggio, inserire i cavi a nastro nei rispettivi alloggiamenti, agganciare il porta-roll in cima e caricare il filamento...

Italy on Jan 27, 2022

CAN100CAN100: very disappointed. rough start....but once those issues were solved, it printed PLA better than any machine I have used....crisp prints.....just very very nice. but the first overnight print failed. just stopped extruding. stayed hot, kept moving on out of filament issues. ran some more shorter prints....fine. next overnight print....failed in same manner.

seems like the extruder just stops moving the filament. so, back to them. too many choices to mess with a faulty unit.

Added this one to the fleet to increase capacity. It very good reviews and a price drop so I purchased it. I am of moderate experience with 3D and was looking for something that might be more technically advanced as well.

After two days and about 16 hours of printing here is what my view is. Certainly some of it is based on my own needs and expectation and may not be something others consider.

Was well packed and complete. Some spare parts + small roll of PLA and a couple tools.
Had a nice "feel and heft" upon removing from box.

Set up is, in my view, not as easy as some have suggested, but much easier than a full kit style. The fold down Z axis might be of value to some,...

United States on Apr 18, 2021