Evolution 14-Inch x 66-Tooth Steel Cutting Saw Blade – Perfect for Heavy-Duty Tasks, Blue

Shane: I used it on my Dewalt 14” multi cutter saw. I had to cut 22-1/2 deg miters on 4” schedule 40 aluminum pipe. I was Very impressed! Had tried using a SS 90 tooth blade first and was able to smoosh my way though but it was ugly. The blade didn’t clear the the chips and gummed up the teeth had big globs of alum clinging to it.
The aluminum blade is worth every penny!

United States on Dec 30, 2023

Rick Stephens: Make sure to check your arbor size that’s where I messed up I did find a Shim to make mine work

United States on Dec 17, 2023

CalgaryBen: I got the 7" aluminum cutting blade to cut down some roller shades (aluminum cassette, tube, and bottom rails), and this blade did the job beautifully. Cuts were clean and square, and barely left any burrs. They were as good as factory cuts. As a result of the clean cuts, the material did not heat up and I didn't have to worry about melting of plastic/vinyl materials.

My miter saw (and most saws I've had/used) has a 5/8" arbor, as would most North American-made saws in this size/class (8-10"), so the 20mm arbor presented a minor challenge. Fortunately, when the hole is too big, you can simply use an adapter to give you a smaller hole. 20mm to 5/8" arbor reduction adapters are readily available for purchase, or in my case I 3D-printed one.

This blade is well worth the price and a worthwhile investment, as having the right tool now, I can save my other blades, and retire use of my chop saw with grinding disc.

Canada on Nov 03, 2023

Mallory H Nicholls: Corta aluminio sin problemas. Accidentalmente corté algo de acero inoxidable y también sin problemas.

Spain on Oct 22, 2023

Barry M.: I have used this blade extensively after DeWalt raised the price on their equivalent version by 30%. I use this a lot...At least 3-4 days a week for a minimum of an hour of cutting. I, occasionally, am in a rush and have some bad cuts due to my laxidazical approach at time and have a piece catch the blade and brake a tooth off. The blade isn't designed for that but, regardless, I cut with it (never had a bent blade after any event) anyway and still produces a decent quality cut. I have had blades with several missing teeth continue to cut well. I always grind my cuts afterward so no big deal. I am abusive to the blades and know that teeth breaking is likely my fault. Better the teeth break than the saw itself. Lastly, because of my rough nature with these blades, I have blades last over 6 months and for as much as I use it, that is a lot of cuts. 99.9999999% used for mild steel. If you are a hobby-ist this blade might be the only one you ever need to buy....literally, like, one blade! Very few this get a red hot review from me but this is a high quality blade!

United States on Sep 21, 2023

AdvaAdva: Aún no la he usado, pero se ve bien, en cuanto la use actualizare opinión

Mexico on Aug 08, 2023

Rodolfo Avila L: Los discos de Evolution son buenísimos al igual de los discos Diablo de Freud.

Mexico on Jul 31, 2023

Alejandro a.: Es un producto de muy buena calidad contento con la compra

Mexico on Jul 24, 2023

AZ Tom: These work great with the evolution’s line of saws. My first one lasted over a year with hundreds of cuts. I’ve cut everything from thin square tubing to 2x2 square stock. The blade does not last as long when cutting very thick stock or thick tubing, but I cut my fair share of that stuff, and it still lasted over a year. The tungsten teeth do chip and fly off toward the end, so when you start seeing missing teeth, it’s definitely time to replace it. WARNING: does not work well with other cut off saws that run around 4000 rpm. These blades run at much lower rpm.

United States on Jun 25, 2022

MargaWalt BrandsMargaWalt Brands: In the past, I have not had good results with carbide tipped metal cutting circular blades but this one is absolutely fantastic. On the left, are cuttings from a traditional abrasive blade. Notice the sharp edges leftover. We then traditionally have to grind over the edges so nobody gets cut. On the right side is a cut with the evolution blade... Aside from taking less than half the time for the actual cut there is no post grinding cleanup.
Unlike an abrasive blade, there are no razor sharp edges to deal with... on the other hand, MAKE SURE that you wear face and arm protection. the metal chips are larger and sharp.
I will report back later about durability.

United States on Nov 23, 2021