Closetmaid #7546 12-Pack White Down/Wall Clips for Secure Mounting

Michel Piette: Pas installé encore semble de bonne qualité

Canada on Sep 03, 2023

Kathleen N.: I took down my wire shelves to paint the closet. Some of the older "hooks" broke in the process. I checked manufacturer to get the same brand, but these seem just slightly shorter and tighter. Had to snap them on with pliers. Recommend you mark location on shelf with a sharpie, because I "snapped" one in wrong spot and had to pretty much destroy it to get it off. Also, I have 4 shelves. If you choose to use a combination of old hooks and new. Make sure you use either all new in a row or all old in a row, otherwise it won't quite line up.

United States on Jul 11, 2023

Philip J. Vogt: I've got a shelf that wraps around the walls of a walk in closet. Somehow the bracket are one end broke (the bottom of the cradle just fell out) and the sagging shelf pulled the first four or 5 wall clips out and sheared off their clippy bits.

Tried to replace the bracket but everything out there is too short, so duct tape stepped in to save the day. Couldn't reuse the wall clips so bought these to shore up spots immediately next to the existing, broken clips.

I will say that, without having the shelf off the wall, these are a pain and a half to clip on. But they do eventually snap into place, and the hardware all worked. Shelf is sturdy now...at least until the tape fails.

United States on Nov 09, 2022

CDP's Onceagain habit of purchasing: One of the back clips for holding shelf to the wall. It can be used in the drywall or screwed to the wall stud as level alignment to hang shelving for securing later and the newer U-shaped clip is for secure attachment so the shelving does not pull out and make the shelving fall.

United States on Jul 12, 2021

Jenny: I was impressed with the delivery time
I ordered this product to help repair the wire shelf that had collapsed.
The packet said 12 clips - BUT I only received 11 - disappointed

Australia on May 13, 2021

AngelBuyer: At my former home I designed solid wood shelving and my contractor made it, spoiling me. Then I sold that house and bought my perfect dream home that I absolutely love. But it's 25-year old and full of the wire Closetmaid shelving that I do not like because small things fall through it and it leaves wire marks on anything that sits on it. I solved that by getting custom-made acrylic sheets to sit on top of shelves, but each time you move a shelf, the brackets holding it up snap. These replacement clips are easy to use and much more functional than the original clips. Using them is easy and more efficient than replacing all of the shelving with custom shelves.

United States on Nov 25, 2020

Old Alice: I say 'easily' because it will fit if you smash it in with force. I bought these because one of my wire shelf clips snapped off at the hook part after putting too much weight on one side. The wire shelving is over 20 years old, so I figure if one went, others would surely follow, and I wanted to have these on hand. I couldn't find any other type of screw that was similar, and I didn't want a nail in unit, because I just wanted to use the same hole the old one came out of.

These are just a tiny bit longer than the old ones. Putting the screw into the same hole the broken one came out of, the shelf is just a hair lower than before. It's probably a mm or 2, so not a deal breaker, but still, why can't they make the same sizes?

The problem came in when trying to put the wire shelf into the hook... nope, wasn't going. It's hard to measure, but by eyeball, it looks like it should fit... but the hook shape isn't a U, it wraps a bit more around. Pushing down HARD on the shelf itself (meaning have the L brackets in already), managed to get it into the hook. This was NOT easy, and it didn't seem like it would fit at all. It's possible that I stretched the hook getting it in...

United States on Dec 13, 2018

Ian Young: Renovating and removed original ClosetMaid fasteners, most of which snapped off while removing the shelves.

Replaced with these, which were much easier to get on and off than the originals, but not designed to support the thicker hanger bars.

Canada on Oct 08, 2018

Keirsten Hickey: These worked great for my "desk mounted power bar holder". I used two of the wall clips screwed onto the back panel of my desk. They are holding up a small basket that contains a power bar, and extra cords and cables from my desk top computer. The estimated weight is about 7lbs total. Even though the basket isn't holding much weight, I am confident that these clips will hold up well with more weight.

Canada on Nov 23, 2014