By: BAK
The BAK BAKFlip G2 Hard Folding Truck Bed Tonneau Cover is perfect for the 2015 - 2022 Chevy/GMC Colorado/Canyon 5' 3" Bed (62.7"). It's one of the best Truck Tonneau Covers on the market, known for its easy installation, superior build quality, overall satisfaction, and size. Get yours today and enjoy the convenience of a secure and stylish truck bed cover.Samuel B.: Easy to install, but is better with two people. Looks great and level with truck sides. Extremely water resistant, and very easy to adjust to fit your loaded items. Gas saver as well.
United States on Oct 05, 2023
Mathieu Lussier: Sa coche 😁
Canada on Aug 30, 2022
Peter AblanczyPeter Ablanczy: Purchased and installed both the BakFlip G2 cover and the BakBox2. It took a little over three hours to install both by myself. The BakFlip replaced a modestly priced brand x which was certified to fit but turned out to only “kinda fit”: Promptly returned brand x and bought the BakFlip. The superior quality and fit were immediately noticeable. Nice rubber seals all around the tonneau cover where it contacts the truck rails and tailgate. Looks great, and only the next car wash or hard downpour will determine its weather resistance. The only issue I had was the elevator bolts that secure the cover to the front of the rails were a tad bit short to engage the threads on the Star Knobs when the included lock washers were added. So far, it seems to be holding fine with just the rubber and steel washers. The star knobs do pull the bracket up some, so my guess is once that bracket settles into its current position, I will be able to add the lock washers as well.
My Colorado replaced my aging Avalanche, which had had two large side compartments to hold bulky, dirty accessories (receiver hitch, booster cables, tied owns & buggies, and more). The Colorado only had a shallow...
United States on May 18, 2022
Pmora: Found this tonneau cover a great purchase although a little pricey. I had it professionally installed and was billed for 1.5 hours, so I have no comment on ease of the installation. It is a perfect fit for my 2016 Chevy Colorado short box and the hard cover appears to be very durable. It was just installed so I have no long term experience with it. I did put it through a high pressure car wash and some spray did enter but nothing that concerned me. The best feature is the ease of operation and knowing my contents in the rear are safe.
At this point I am very satisfied with this purchase.
Canada on Mar 04, 2022
Jake MastersonJake Masterson: Installation is very easy. My only issue is the kit was missing some screws and inserts and the pre-drilled holes aren’t even and not cleaned up. Pieces of sharp metal sticking out. See pics.
The instructions aren’t up-to-date and normally go up to 2016 so it’s a little confusing as to whether you need a spacer kit as per the manual.
If the company is going to sell these for 1300 bucks, they should at least put a little more effort into the fit and finish of the product and ensuring all of the hardware is in the box. They say it’s the best on the planet so I’d hate to see what the other companies are selling.
Canada on Oct 07, 2021
review: After I got a few quotes for a camper shell for my truck that would cost about as much as some used cars, I opted to buy a cover like this instead. I actually ordered the Gator brand FX first directly from the Gator website. I received a previous customers incomplete and busted return. So it took a while to return it and the company itself is pretty hard to work with. I’m pretty sure Bakflip and Gator are the same company, if you look at the websites they look identical. Because of the difficulty working with the company I decided to purchase from Amazon who will take any return back if you have a problem. Went with the bakflip so I could close the tailgate without opening the last panel, other than that they are pretty much identical to the Gators. I got a good new one in a nice box and it installed really easy and quick. You’re going to need a friend to hold the top of the bolt that connects the cover to the rails so you can push from underneath and tighten the star knobs. I don’t expect it to be waterproof, some water will surely leak in but the drain tubes went in really easy (zip tie the top section that connects to the rails!) and seem to work. Stick a little piece of...
United States on Oct 03, 2021
Wayne C.: The tonneau wasn’t too bad to install. Took maybe an hour because we had to make some adjustments in order for it to cover the entire box. The weather stripping could be made of a more durable material such as a closed foam instead of an open foam and the adhesive could be more stronger. When making the adjustment after finding the cover was a wee bit too short in the initial position the stripping did not adhere again very well. Ended up purchasing some new stuff which I hope works. Overall quite happy with the purchase and recommend the BAK brand though possibly a bit more research could go into the overall design but that might be tough to do with the different truck brands and bed dimensions to provide an exact fit.
Canada on Sep 29, 2020
S. B.: I watched videos to clear up install instructions that weren’t clear to me on the instructions that came with the package. I installed the gutter hoses without the plugs I pulled out of the truck bed. I had water leaks through the holes. You do need to drill holes in the plugs (carefully as this is so dangerous that I made my husband do this part) and feed the gutter hoses through then put the plugs back in. Directions say it’s optional but I prefer things to stay dry. Other than that, installing is very easy for me, the truck bed is secure when the tail gate is locked and it looks really nice.
United States on Dec 14, 2019
Amazon Customer: I bought this this tonneau cover after doing much research. I decided that a tonneau cover that allowed me to partition the bed would work best. This bed cover does everything I want. I can use as much or as little of the bed as I'd like. Installation was easy and the instruction manual kept things very straight forward. I watched several videos on the installation prior to my purchase.
Positives:
- relatively easy installation
- allows me to utilize all of the bed when open.
- ability to lock with the tailgate
- sleek design that sits flat
- appears to be solid and sturdy
- price (relatively mid-range)
Negatives:
So far I don't have any complaints. The one minut issue I have found is that it's not completely water tight. However, this is not really a problem for me. I did not expect it to keep out 100% of the rain. We had several days off heavy rain and there was a little water that trickled in near the corners but everything that I store in the bed is completely dry.
This has easily been one of my best purchases from Amazon.
United States on Jul 16, 2019
BAKFlip G2 Hard Folding Tonneau Cover for Trucks - Secure Your Truck Bed in Style! | Soft Tri-Fold Truck Bed Tonneau Cover - Compatible with 2015-2021 Chevy Colorado & GMC Canyon by Tyger Auto T3 | Tyger Auto T3 Soft Tri-Fold Tonneau Cover for Pickup Truck Beds | |
---|---|---|---|
B2B Rating |
76
|
97
|
97
|
Sale off | $82 OFF | $28 OFF | |
Total Reviews | 37 reviews | 700 reviews | 1 reviews |
Best Sellers Rank | #172,899 in Automotive #468 in Truck Tonneau Covers | #7,429 in Automotive #14 in Truck Tonneau Covers | #2,865 in Automotive #3 in Truck Tonneau Covers |
Product Dimensions | 68 x 23 x 8 inches | 64.17 x 61.97 x 1.38 inches | 63.35 x 63.82 x 1.38 inches |
Manufacturer | No | No | Tyger Auto |
Exterior Finish | Chrome, Painted, Polished | ||
Item model number | 226126 | TG-BC3C1039 | TG-BC3T1030 |
Manufacturer Part Number | 226126 | TG-BC3C1039 | TG-BC3T1030 |
Brand | BAK | Tyger Auto | Tyger Auto |
Lock Type | Tailgate | ||
Style | Folding | ||
Customer Reviews | 4.5/5 stars of 396 ratings | 4.8/5 stars of 5,288 ratings | 4.7/5 stars of 6,826 ratings |
Is Discontinued By Manufacturer | No | No | |
Material | Aluminum | ||
Exterior | Chrome, Painted, Polished | Vinyl | Vinyl |
ASIN | B071WP2PD7 | B019NUGJ5M | B00L32LMVA |
Item Weight | 53.9 pounds | 22.3 pounds | 23.3 pounds |
OEM Part Number | 26126 | ||
Model | BAK226126 | TYGER T3 | TYGER T3 |
Date First Available | September 5, 2014 | December 21, 2015 | June 16, 2014 |
T M.: Leaks more than an older version I have on my other truck
Canada on Oct 06, 2023