200-Piece Self-Drilling Drywall and Hollow-Wall Anchor Kit with Zinc Screws by CONFAST

Scott Carle: These worked great to mount some flush mount vesa mounts for a couple 24 inch monitors to a sheetrock wall. As sturdy as you can get if your going to mount something to sheet rock.

United States on Oct 07, 2023

Well Hello: These are easy to use, hold lots of weight, and I don’t need a drill (am I supposed to? I didn’t read the instructions)

Pros- lots of them, good price, works well

Cons- the holes I made in the wall before I bought these

United States on Oct 06, 2023

Megan JaneMegan Jane: This was the first time I've used purchase and used self-drilling anchors. I have a behind-the-door plastic shoe holder. I didn't want the holder to be visible from the outside. Therefore, originally I hung the holder using 3M hooks. Stupidly, I didn't check the weight allowance and the strips didn't hold. I decided to find a more permanent solution. After doing some YouTube University research, I found that I could use drywall anchors on a hollow door. I was a little apprehensive that these would be too much and tear the hollow door. But to my surprise, it worked! It's been a couple days and they are holding strong! Very happy.

United States on Sep 26, 2023

Amazon Customer: These will help hang just about anything. I used them while updating bathroom light fixtures above mirror and they are definitely not going anywhere. I dont know how some people are stripping these out unless they are trying to go through a stud. They are good quality and strong.

United States on Sep 13, 2023

Harpreet Singh: The anchors are ok but the screws are garbage. The tip fellow off as soon as you put pressure on it. Made my work even harder because I had to pull off the broken screws and put a different one again.

Canada on Aug 03, 2023

Tim Porter: Just a great product which holds up well for all applications including towel rack.

Canada on Jun 21, 2023

Richard P.: très bon prix pour le lot merci

Canada on Mar 27, 2023

Holly: Good

Canada on Mar 19, 2023

Antirouille Métropolitain: Qualité prix Bon

Canada on Dec 22, 2022

CDB: These CONFAST drywall anchors are almost identical to the old style drywall anchors sold at hardware stores, with one caveat: The outer flange is slightly more concave, is weaker, and has a tendency to separate from the main body (screw section) when either drilling or carefully hand screwing it into drywall. Although the anchors are similar in appearance, the differences are mostly in weight and strength of the metal used -- the old style are heavier and much more solidly constructed. Well, isn't that the case with a lot of things being manufactured these days?

The workaround: It's been my experience to pre-drill when needing to use this type of anchor for accuracy. And that's still the case, however if you want these anchors to be flush with the drywall when you're finished, you must first use a utility knife to cut away any drywall protruding from the drilled hole, and make the drywall surface smooth. Then you screw the anchor into the drywall until it's pretty snug against the wall. It wont be quite flush, but if you continue to screw, it will cause the flange to separate.

At this point, I take a small hammer and hit the flange and anchor against the drywall,...

United States on Oct 09, 2021