Collin Lipscomb:
This is my first 3d printer, and I'm really enjoying it so far. I'd recommend watching some videos going over this machine to get familiarized before purchasing. There's this weird yellowish substance on the build plate, so make sure to clean the bed with isopropyl alcohol after removing the protective film to ensure good bed adhesion.
Pros:
- cheap
- really good print quality
- easy to follow instructions and good illustrations
- screen looks great
- silent stepper motors
Cons:
- plastic extruder is bound to break at some point
- fans are not overly loud, but get annoying to listen to for extended periods of time
- stock firmware must be updated in order to avoid potential fire hazard
United States on Oct 08, 2021
Meph:
So this is my second, and third printer. I liked it so much I bought two. I started with another less popular brand and was troubleshooting more than I was printing.
I haven't had that issue so far with these.
Assembly is relatively easy if you can follow instructions, and once it's leveled to the bed it'll print without any tuning out of the box. Ive installed a bltouch with 5x5 bed leveling and it prints perfect models. The fans are QUIET and I could and have sleep in the same room with them on. I recommend upgrading the extruder and Bowden tubes as they're just such great cheap upgrades to better print quality.
I did have one minor issue with a thermistor on my second printer today and support got back to me within a few hours. They sent me a new one within a day. Im still waiting on support for the other branded printer im sending back.
I haven't had this much fun in a long time and this printer makes it easy to set up and get right to it. I HIGHLY recommend this to anyone just starting out as the assembly will help you learn about the different components of the machine and how they work well enough to start you out printing successfully. I also...
United States on Jun 15, 2021
Mr. C. CAMPBELLMr. C. CAMPBELL:
The media could not be loaded.
Hello all,
Like many I did get a 3D Printer before this one.. I got a Tronxy X5SA 2020 upgraded Model.
Although I been having leveling issues wit ta printer as the bed is so big!
So while sorted out that, I still needed to carry on doing this great new Hobby.
So I saved up and was going to buy the much praised Creality Ender 3 V2 printer.
Then I was looking through 3D printer unboxing and review videos and saw a printer that was totally loved by 4 you tube channels of 3D printing!
All of these guys had brought and unboxed and built and tested this Voxelab Aquila 3D Printer.
They all said what a great printer for the money it is a clone of the Creality Ender 3 V2.
Just a different control screen ( nice one ) It was the same size and build, But here's the amazing thing!
It was £87.00p cheaper than the Ender 3 V2. Did the same...
United Kingdom on May 23, 2021
Rachel StefanelliRachel Stefanelli:
The first things I want to get out of the way is setup, print quality, etc. The setup is very easy note that it’s mostly disassembled but it should be a very easy setup it took me around 2 hours with the help of YouTube videos but the manual is very easy to understand it comes with everything you need to put together Plus One of everything extra which is amazing setup is 10/10 next print quality The quality on this machine is amazing for this price The first layer sticks almost every time printed over 50 objects only had an issue with certain prints but that is fix with adding a brim during slicing print quality is better than the ender v2 100% 10/10 next is what the printer includes it includes everything you need from a SD card reader to Some test pla witch is amazing for someone starting out you don’t have to buy anything extra 10/10 next is software the printer comes with voxelmaker slicer on the included SD card The slicer already has A profile for the printer which is amazing you don’t have to tweak any settings personally I use Cura but for beginners the included slicer is amazing 10/10 and that’s it please make sure your bed is level correctly or...
United States on May 04, 2021
Matty Darios Ezzat:
Good machine. Fast delivery
Sweden on Mar 24, 2021
Linnea WhitcroftLinnea Whitcroft:
The media could not be loaded.
This printer was so easy to put together. Everything was labeled very nicely and easy to read and understand. New users or beginners starting out in the hobbie should have no problems assembling. I used cura as my slicer with stock settings and this is my first print on the aquila. I am new to the glass bed but am excited to tune the settings in to this printer. Great print quality for first print can only get better from here!
Canada on Mar 03, 2021
Amazon Customer:
Great printer, it's almost the same as an Ender 3 V2.
The assembly is straightforward for someone like me (tool 15-minutes to assemble) it could take 1 hour for someone without technical skills
After the initial bed leveling I did the provided print test and it was on par with my 1000$+ printer.
Keep in mind this is an entry level printer, you can't beat the price vs quality.
Also you can easily upgrade this printer (hot end, extruder, bowden, add a second z axis, with marlin firmware modification you can add auto bed leveling [marlin skills required])
Canada on Feb 05, 2021
| Voxelab Aquila 3D Printer: Create Professional-Quality 3D Prints with Ease | ANYCUBIC Kobra 3D Printer with Automatic Bed Leveling Feature | ANYCUBIC Vyper 3D Printer - Unleash Your Creativity in 3D Printing | |
|---|---|---|---|
|
 |
 |
|
| B2B Rating |
72
|
87
|
84
|
| Sale off | $29 OFF | $40 OFF | $69 OFF |
| Total Reviews | 230 reviews | 205 reviews | 45 reviews |
La qualité des impressions est superbe et l'imprimante est relativement silencieuse hormis les ventilateurs que j'ai pris le temps de changer pour des plus silencieux !
Le montage est très simple, les instructions sont claires !
Je recommande pour plus de fonctionnalité de changer le firmware interne.
France on Dec 21, 2021