Mustee 17W Utilatub Wall Mount Laundry Tub - Perfect for Smaller Areas!

Kim: Husband very picky and really likes this sink for garage.

United States on Jul 06, 2023

Amazon Customer: Plumber installed ours- took him a couple hours. Looks great and functions well. Allows more floor space in my laundry room which was the goal.

United States on Mar 03, 2023

Patrice Ann: I had a plumber install this. At first he scoffed at the non-metal hanging bracket. But he had no problems installing it to the wall. I like the laundry tub. It’s a nice size and is really sturdy.

United States on Mar 11, 2022

A. DorseyA. Dorsey: Tub came with wall mount and side brackets. Tube is thick and great quality. No cracks on my unit in shipping. Key thing to know the Side brackets attach to the bottom of the tub and are there to provide additional support and level the tub on even wall. I have an uneven wall location as the bottom wall was concrete blocks and the top was drywall with studs plus additional bottom molding I added to finish the look of my garage. I used heavy-duty shears to cut around molding and cut some of the plastic away from the wall to make it fit for my needs other wise the side plastic would cut into the drywall because of the unevenness but this was just my application and no fault of utilab. Additionally I will add a 1in thick board approximately 6 in wide to "toe nail" in to drywall transition board and offset the level difference at bottom making the sink level at the top. However the sink looks and functions well now for use. I noticed there were some areas on the inside the tub that were rough or that didn't have clear coat on them. I will also be recoating the inside with a water phobic poly-acrylic coating to fix that to prevent staining in those locations.

United States on Jul 25, 2021

tool builder: The tub is shiny, reinforced, heavy duty plastic. It seems quite sturdy. The bottom tilts toward the drain, so there won't be standing water in the bottom. The ledge where the faucet goes is completely level, and water can potentially drip off the sides.

The dimensions provided by Mustee's documentation are accurate. There are dimples on the underside where you drill the faucet holes to help center your drill - nice touch. I found that starting a hole from underneath, then finishing from the top prevents tearout. The tub works easily with a hole saw, and even a spade bit if you have to use one.

The tub can hold roughly 180 pounds of water when full, so make sure your mounting is secure. Ours is mounted to concrete block with 6 Tapcons - we didn't used the supplied bolts and inserts. The mounting bracket holes are large enough that you'll need washers under the Tapcon heads. When the plumbing is disconnected, you can lift the sink off the mounting bracket with a bit of effort.

The sink was nicely packaged for shipping. You get a sturdy mounting rail, mounting hardware, a rubber stopper, and a 1 1/2" nut with tailpiece washer for the drain. The drain uses...

United States on Apr 25, 2019