Monoprice Voxel 3D Printer: Create Professional-Quality 3D Prints with Ease

Client d'Amazon: Cela fait maintenant plus d'un ans que je l'utilise est l'avis est mitiger

-Déjà le bruit c'est un avion de chasse comment c possible d'avoir des ventilos aussi bruyant comme ca
pour 350€ c impensable aujd en 2021 ca fait trop de bruit le caisson est inutile
et impossible de travailler a coter comme montrer sur les image elle doit être dans une pièce appart ce qui est dommage

-le truc wifi connecte tu envoie les impression a distance MDR une blague tout est en chinois et absolument pas fonctionnel la vidéo est en 10fps et de qualité 240p

-Niveaux impression ca fait le job mais sans plus le plateaux est a nettoyer a l'acétone toute les 5 impression sinon ca accroche plus

-MAIS SONT PLUS GROS POINT FAIBLE c'est que c'est propriétaire par chance je l'ai resus courroie correcte mais après 1 ans c'est détendue c'est inévitable et la bonne chance c'est des vis hexagonale déjà et puis aucune notice n'existe pour retirer la carcasse en plastoc car les courroie sont cacher dessous c'est malin (pas du tout hyper c*n) et les bobine mon dieux seule la bobine fournis rentre dans l'espace sur le coter sinon pour des bobine de 1Kg il faut faire un...

France on Nov 07, 2021

Amazon CustomerAmazon Customer: Overall I'll give this printer 5 stars, it has everything I was looking for
- enclosed (we have curious cats that would try to help)
- prints PLA and ABS
- almost fool proof design

I have done about 10 prints, had two failures, but those were newbie mistakes I made. There are some small issues with this model which I'll point out.

- The internal spool holder will only hold 500g spools which are hard to come by. To use the common 1Kg spools, you need to print an external spool holder and drill a small hole for the filament to go in. I've attached a pic of my spool holder which attaches to the side of the unit. Work great, no problems.

- The touch screen is not as responsive as it should be. When you press the screen, wait a second for the screen to go to the next menu, otherwise it will queue up the additional presses and use them for the next screens. This tripped me up when loading the filament, I would press start, then press the start again thinking I didn't press it right, but the second press would be applied to the next screen which caused the loading of the filament to stop.

- Instructions and user manual are lacking. But there are...

Canada on Sep 28, 2021

Amazon CustomerAmazon Customer: After getting very frustrated and not knowing the cause of the poor prints, I re calibrated the hot tip to the bed and wow what a difference this made, as you can see from the pictures linked the first 2 are epic fails, the 3rd if one of a test print i did and the result is way better and at the base slicer settings.
I would most defiantly recommend this printer to any one wanting to starting 3d printing, just make sure you calibrate the hot tip, i used the tip leveling paper i got with my other printer,all you have to do is to move the hot tip from a negative number to a positive and then bring it down a bit at a time until the paper just grabs the hot tip. It should be around about +0.2-0.3 IMO.
One other note one of the fans is a little noisy but not to bad. AAAAA+++

United Kingdom on Feb 06, 2021

H. K.: Ich finden den Drucker top, genau richtig wenn man mit dem 3D Drucken anfängt aber auch, so wie ich, die Erfahrung mit Industriedrucken von Alphacam hat. Der Drucker ist von der Baugröße 150x150x150 genau richtig. Die Auswahl von Filamenten im Netz ist schon gigantisch, diese hat man mit den Industriedruckern nicht. Das hat auch etwas mit der Gewährleistung der Druckköpfen zu tun, wenn anderes Filament wie vom Hersteller verwendet wird. Ganz wichtig auch bei diesem Drucker ist, die Reinigung der Bauplattform.
Man muß auch hier eine Reinigungslösung auf Basis von Ethanol verwenden. Am Besten eignet sich hier ein Desinfektionsspray für die Fläche. Am Anfang hatte ich auch das Problem, das sich der Druck bei großen Teilen gelöst hat aber nach dem Entfetten war das Problem behoben. Die Druckqualität ist für den Ersatzteilbereich im Hobby- und Hausgebrauch ausreichend. Für die 1 Kg Filamentrollen gibt es genügend freiverfügliche Adappter auf thingiverse.com. Ich habe den Drucker ausgwählt, da er eine beheizte Bauplattform hat und auch ABS drucken kann und dadurch gekappselt ist.
Für Anfänger genau richtig aber auch für Profis gut zum spielen und ausprobieren...

Germany on Oct 23, 2020

AC: Llega lista para conectar y empezar a imprimir, fácil de usar y programar. el único detalle seria que se pudiera programar para que se apagara al terminar de imprimir.

Mexico on Feb 12, 2020

bblack16: I had been interested in getting into 3D printing for quite a while, but kept putting it off due to cost and fear of kids being around an open air printer. I found the Voxel on sale one day which fit well into my price range and, best of all, was enclosed and ready to go out of the box. It took some time to get used to 3D printing in general, but it wasn't too long before I was successfully printing all kinds of things. Unfortunately, a couple weeks in, my extruder's X-axis locked up and stopped working. I contacted Monoprice tech support who immediately helped with some recommendations and ultimately decided to replace the unit for me. Their tech support was fantastic, and despite the problem, I highly recommend this printer (which is why I'm giving it 5 stars).

PROS:
- Ready to go out of the box
- Enclosed, so it is a *bit* safer around little kids
- Wifi connected
- Quality is good. Better than I expected at the price
- Works well with both PLA and ABS (though best results with PLA)
- The Flashpoint software is easy to use (this coming from a first time printer)
- Touch screen works well
- Great price point
- Great customer service from the...

United States on Oct 11, 2019

mix579: TL;DR: Great printer

Pros: Great value. Super easy to use. Compact. Excellent print quality. Little to no leveling required.
Cons: Small-ish print area. Crappy camera. Needs external spool holder if you want to use standard 1 kg filament. Uses non-standard .gx format.

UPDATE 3 MONTHS AFTER PURCHASE:
I still think this is a great machine. I have used it now for PETG, and it did fine. Bought a few replacement nozzles when they became available. I saw occasional clogging of the nozzle, more frequently than on my Wanhao DI3 with an all metal hotend, but somehow with the new nozzles this seems to occur much less frequently. Need to relevel bed every 10 prints or so. I went back from glass to the original bed because I really like how easy it is to remove the prints. The external I gave up completely on the inbuilt camera and use a Wyze camera instead to monitor prints. PolarCloud is garbage. My main issues are
1) The MAC address for Wifi changes every time you start the Voxel, so you have to look for the IP address to enter into the FlashForge software. Better to stick with Ethernet or set the Voxel up as a hotspot.
2) I wish it could read standard .gcode...

United States on Jul 02, 2019