Explore the Possibilities of 3D Printing with the FlashForge Adventurer 3 Lite FDM Printer

Me encantado: Me encanto todo 😍

Mexico on Feb 17, 2023

VicoVico: Vino bien empacada, funciona excelente y ademas es facilisima de usar. No tuve q pelear para la calibración. Imprimi el mismo dia q recibi. No trae carrete solo pla, pero lo colocas en la bandeja sin problema y asi introduces el filamento y comienzas a imprimir.

Mexico on Oct 15, 2022

screege: Soy completamente nuevo en la impresión 3D, creo que la impresora cumple al 100% con sus propósitos, llevo casi 1 mes usándola y no me ha dado ningún tipo de problema, simplemente pongo los modelos imprimir y listo, creo que no hay nada más fácil.

Mexico on Sep 25, 2022

Vegita GuillermoVegita Guillermo: The media could not be loaded.  Venia totalmente sellada; al abrirla no note nada extraño. No tenia daños, ni rastro de uso alguno. Al iniciar con el clásico cuadrito de prueba de impresión, todo funciono normal.
Lo que no me gusto, fue que el filamento venia enredado muy raro, y sin su soporte, pero no afecto en nada a la hora de imprimir.
Si tenia mis dudas sobre la impresora, y mas por el precio, pero valió la pena.
Le doy un 10 de 10.

Mexico on Aug 02, 2022

SergioSergio: Les recomiendo buscar otra, de verdad da muchos problemas esta impresora, la idea parece fabulosa hasta que te salen bastantes problemas, no encuentras refacciones y cuando las encuentras salen defectuosas como las boquillas "Originales". dis que silenciosa jajajaja (Que les costaba poner ventiladores un poco mas grandes y de mejor calidad el ventilador que va en la electronica es insoportable.)

Calibración automática es una autentica BURLA, el software tiene un defecto calibras bien inicias la impresión y te das cuenta que algo no esta bien, cancelas esa impresión y regresas a la calibración para darte cuenta que no guardo lo valores y esta toda desajustada y así te puede pasar varias veces.

** Actualizó - en menos de un mes está pieza que une el tubo guía con la extrudora se desprendió del tubo guía dejándome unos días sin poder imprimir les recomiendo ampliamente tener siempre a la mano una de repuesto porque no se sabe cuando falle, aunque no lo califico mal por ser algo mecánico me costo conseguir la pieza en genérico ya que el repuesto original no lo encontré por ninguna parte, espero que sea de ayuda para los que se inician en este mundo

Mexico on Jul 17, 2022

Cesar Torres: My son and I were curious about the world of 3D printing so we decided to look for a printer that was easy to use but most of all easy to put together. I have seen and heard horror stories of people that spend the first 3 hours just building their 3D printers. I am an inpatient guy and I wanted to get into 3D printing not spend time assembling a machine. I did my research and found this little gem. It comes fully assembled and ready to use right out of the box. We read the instructions and loaded the filament. Super easy to figure out. We downloaded a few small projects from Thingiverse.com and got started. Not one issue to date and everything prints perfectly. If you are looking to get into 3D printing this is the machine you should be buying without question. The only "downside" if you want to call it that is that the print area is relatively small. The maximum size you can print is 6 inches wide by 6 inches long by 6 inches tall but you will find that you can make a ton of stuff that fits the size parameters. You can always downsize the project and just make a slightly smaller version of what you want to print.

United States on May 12, 2021

CAN100CAN100: Needed some additional 3-D printing capacity. I have 3 units (Dremel, Snapmaker, generic) and it seemed that at times I have more to print than those units can do. I consider myself a bit more than a novice, but certainly not a pro with 3-D. I do make my own drawings and print the items as well as download a lot from sites like Thingsverse.

The features I liked on this were fairly low price 150 x 150 x 150 print space, enclosed (quieter), ethernet ability. I do not need the absolute best quality for most of my stuff.....and this one spec'ed out to match my needs.

First....out of box to printing test block was less than 10 minutes. Block was pre-loaded, so it was easy. First print was about 11 minutes and ended up dimensionally near perfect. Two other prints (from my files--one thing verse, one mine) loaded via usb stick perfectly. Both were items I have printed previously.....about the same time as printing with my Dremel and dimensionally (and finish) an improvement. 5 items on three prints all have been perfect. Running a "torture test" print now and will up date with those results.

Flexible build plate has made removal of flat pieces easy with no...

United States on Mar 20, 2021

MichaelMichael: If you are a beginner with little to no knowledge about 3D printing then this might be the right printer for you. Ok I can say is it took longer to unbox this thing than it did to get it to start a print. I have had very few failed prints on this thing and when they do happen, it’s almost always due to the print not sticking to the plate good enough. This is easily solved with just learning what works best for the print and such. The software from flashforge to slice and print your files is so easy to use that a beginner can get successes but someone who knows more can still go in and mess with advanced settings as well. I have over 300 hours on this thing in a month and I am very impressed. Been so successful that instead of turning me away from the hobby, it has made me want even better more expensive printers. In the pictures you can see some of my prints. The paint rack is my favorite even though every piece printed for that had to be “cut” in half to fit on the build plate for this printer. No big deal, just a little glue and it’s one piece again. The few fails I have gotten on this printer from bad adhesion has no way out me off this printer. Just keep your plate...

United States on Jan 07, 2021