Elkay Dayton Equal Double Bowl Drop-in Stainless Steel Sink - DSE233194

raymond w richard: Easy install, looks good. Remodeling kitchen

United States on Dec 01, 2023

BBeverly: Loved it. Was easy to install. Just dropped it in.

United States on Nov 14, 2023

Amazon Customer: My sink looks so well with my new counter tops, so glad we decided to buy a new sink. It is a little deeper and I love that.

United States on Sep 29, 2023

Doug: Decent quality at a reasonable price. It arrived straight and flat with no dents.
I did have some leftover sound deadener (Kilmat), which I used around each bowl. Absolutely eliminates the "tinny" sound when you toss metal utensils in the sink. I highly recommend it for any steel sink.

United States on Jan 05, 2023

Roger: The cut-out or dimensions for the hole in the countertop required for this sink is 18 3/8 x 32 3/8 inches minimum and a maximum of about 18 1/2 x 32 1/2 inches. Directions state to cut the 19x33 inch sink 5/16 inches less than the outer dimensions or traced rim size. (eg. 5/16 + 5/16 = 0.625 inches, 3/8 = 0.375 inches, ... I think cutting larger than 1/2 inch smaller diameter than rim would be too close to cutting too much countertop.)

My actual already cut-out sink hole was 18x32 inches. I merrily used a circular saw with a cross-cut blade and cut my laminated wood countertop ~3/8" wider on the back side length and ~3/8-1/2 inch on one side of the depth/side. I finished the circular blade cuts, using a Japanese pull saw just short of the rounded corners.

I happened to have a straight metal straight edge/ruler, close to the correct width from the back wall, as a cutting guide for the back cut and free-handed the cut on the depth/side. Lots of dust with an old wood laminated countertop!

PROS
1) Fits, or almost fits my existing countertop sink hole

2) Four holes, for a smaller lighter hand sprayer

CONS
1) Not initially veiwable, my stainless...

United States on Jan 22, 2021