Jason Solodow: Very very useful if you're setting multiple rivet nuts. Be prepared to lose some rivet nuts while you figure out the correct settings for the drill you're using with the type of rivet nut. Once you figure it out though it makes setting rivet nuts fast and reliable. The rest of the guys in the shop borrow it everytime they need to set some!
United States on Apr 12, 2022
Ronald Y.Ronald Y.: I had a project that needed ~320 rivet nuts installed. I've had Astro's trusty manual rivet nut tool for years now and it's done the job for onesies and twosies but I was up to 20 rivet nuts on this project before my puny arms gave out.
I bought the pneumatic version of their tool and after I figured out how to use it, I ended up rivet nutting the rest of the 300 pieces within 3-4 hours. This is 3-4 hours with plenty of beer breaks. I used a Milwaukee 12v impact drill with the torque setting set to "2", using M6x1mm nuts. At that setting, I only over-torqued maybe 6-8 rivet nuts out of the 300 and had to start over with the piece.
My only complaint is that the input shank is a wee bit too long so it doesn't click into the impact drill. I learned to maneuver around the issue but it would occasionally slip off the gun from time to time.
Also, the only manual part about this tool is screwing the rivet on. At first, I wasn't able to reverse out of the nut after I had riveted it on but with a little practice, I was about to reverse it out in one shot.
Good tool, I'm glad I picked it up!
United States on Jul 07, 2019
ChrisChris: Out of the box this is a very good tool. With a few DIY tweaks it can be a great tool. The tool as it comes works well but is not very smooth in operation. I decided to crack it open and check out the guts. Disassembly requires the removal of 1 Circlip (Outside) and 1 E-Clip (Inside). The internal components appear to be well made but the grease is horrible. It's the typical yellow chinesium fare that is marginal when new and gets waxy over time. I cleaned out all the stock grease and used liberal amounts of Lucas X-TRA Heavy Duty Grease: http://a.co/8wmRJvs Reassembled everything and it’s a night and day difference. Operation thru the entire range of movement is smooth as can be.
The other tweak is to the driveshaft. The tool worked good using a Ryobi 18v cordless drill. I wanted to see how it would it work with a Ryobi 18v cordless impact driver. I was impressed with the difference. The impact drive having a shorter snout makes things less awkward. It also requires less hand strength and cinches the rivnuts down better. There is one issue with using the impact driver. The drive shaft will not lock into place as the machined groove is bit too far down the shaft. I used a...
United States on Jul 10, 2018
Michael Thomas Cantwell: As a machinist, quality tools not only function well, but also are a pleasure to hold with just the right heft, fit, and finish. How well the tool functions is what really matters, though, and this Astro Pneumatic ADN14 Rivet Nut Driver is top-shelf. For what it does, hold a rivet nut and compress the threaded end down onto the flanged end, the Astro exceeds even my obsession for the best tool at a fair price.
Rather than using a makeshift rivet nut compression method like a nut, bolt, and washers I opted to get the tool. Always great to have a bonafide reason to get a new tool, amiright? I'm new to installing rivet nuts, although the process is rather straightforward and, with so many tools available on the market with varying reviews, it was a struggle to choose the 'right' one with quality/value balance.
So, if you're interested in setting rivet nuts, the first decision hurdle is which compression method: manual (plier) or powered (drill-driven like this model ADN14). My priority was focused on having a small enough tool where clearance to set the rivet nut wouldn't be an issue. This was paramount, as so many applications are in tight spots with limited reach,...
United States on Sep 19, 2017
| Astro Pneumatic Tool ADN14 Rivet Nut Drill Adapter Kit - Perfect for Installing Threaded Inserts into Sheet Metal and Plastics | Paslode 816008 Orange Framing Fuel Cartridge - Compatible with Paslode Cordless Framing Nailers | Original Coil Nailer Hanger from Toolhangers Unlimited - Keep Your Nailer Securely Stored and Ready to Use! | |
|---|---|---|---|
|
 |
 |
|
| B2B Rating |
78
|
98
|
96
|
| Sale off | $78 OFF | $7 OFF | |
| Total Reviews | 19 reviews | 40 reviews | 32 reviews |
| Sound Level | 69 dB | ||
| Style | Rivet Nut Drill Adapter Kit | Teal 10115 | |
| Thread Size | M 3,M 4,M 5,M 6 | ||
| Item Dimensions LxWxH | 8.86 x 5.71 x 2.56 inches | 8.7 x 1.5 x 1.5 inches | |
| Included Components | 1 Astro Pneumatic Tool Branded Product | Unit^Instruction Guide | |
| Horsepower | 1 hp | ||
| Item model number | ADN14 | 816008 | |
| Date First Available | July 28, 2017 | November 4, 2013 | May 22, 2017 |
| Item Package Quantity | 1 | 1 | |
| Thread Type | Unified National | ||
| Voltage | 12 Volts | 3 Volts | |
| Metal Type | Aluminum, Alloy Steel | ||
| Is Discontinued By Manufacturer | No | No | No |
| Batteries Included? | No | No | No |
| Customer Reviews | 4.5/5 stars of 418 ratings | 4.8/5 stars of 1,335 ratings | 4.7/5 stars of 1,043 ratings |
| Item Weight | 1.77 pounds | 4 ounces | 6.9 ounces |
| Accessory Connection Type | Power Tools & Manual Tools | ||
| Part Number | ADN14 | 816008 | |
| Batteries Required? | No | No | No |
| Product Dimensions | 8.86 x 5.71 x 2.56 inches | 8.7 x 1.5 x 1.5 inches | |
| Fastener Type | Rivet | ||
| Country of Origin | China | ||
| Manufacturer | Astro Pneumatic Tool Company | No | No |
| ASIN | B01JBO58FM | B00GG0YWRK | B077H51X2V |
| Measurement System | Metric | ||
| Brand | Astro Pneumatic Tool | Paslode | |
| Item Weight | 1.77 pounds | 4 ounces | 6.9 ounces |
| Material | Aluminum | Other | Solid Steel |
United States on Mar 11, 2023