AECOJOY 16" Black Hairpin Table Legs Set of 4 - Heavy Duty 2 Rods with 3/8" Diameter

Jette: These work fabulously! I've had them on my desk for a couple months now, and after re-arranging my office a couple times, they're just as sturdy as when I first purchased them! Would recommend!

Canada on Aug 16, 2023

Ted Bruce: Used for coffee table

Canada on Jul 17, 2023

Fadi Shamaan: Well, let me tell you about my experience with the AECOJOY 16" Black Hairpin Legs! I decided to order these legs to make a DIY desk for my home office, and let me tell you, it was quite the adventure.

First of all, when the package arrived, I was a bit surprised by how small it was. I mean, these are 16" legs, but the box was barely bigger than a shoebox! I started to get a little worried that I had accidentally ordered miniature legs or something.

But nope, when I opened the box, I found that the legs were indeed the right size. They were also very sleek and stylish, with a nice black finish that looked great against my wooden desk top.

The trouble started when I actually tried to attach the legs to the desk top. The instructions that came with the legs were pretty minimal, so I was left to figure things out on my own. I'm not exactly a handy person, so this was quite the challenge.

First, I tried using screws to attach the legs to the desk top. But no matter how hard I tried, the legs just wouldn't stay put. I even tried using some duct tape to hold them in place, but that didn't work either (surprise, surprise).

Finally, in a fit of...

United States on Apr 15, 2023

Sabrina Champagne: J’ai utilisé ses pattes de chaises pour faire un banc d’entrée avec un morceau de bois que j’avais à la maison! Style de meuble qu’ont retrouve en magasin, mais à bas prix

Canada on Feb 03, 2023

Denis: Wasn’t sure at first after reading some reviews. But installation went pretty well, some people complain about the screws, but you just need to drill before screwing. They hold very well. The feet holds well too. But if you slide the table on the floor, yes they tend to pop out. So if you need to move the table take it in your hands… good product!

Canada on Jul 01, 2022

PammyD: Arrived very quickly. Individually wrapped to protect the legs. Good sturdy legs for the coffee table I made for my daughter. I drilled pilot holes to attach the legs, filled with wood glue, then hand tightened the screws down with a good size screwdriver since some complained about the screws stripping out easily. Worked perfectly with no problems. Exactly what my daughter wanted!

United States on Feb 04, 2022

LuisLuis: I took a 3/4" plywood board and cut it to a rectangle 72" X 30". Added a 1 X 3" border inset about 1 1/2" from the bottom edge, sanded and painted it and installed these legs and I created a great, functional table made exactly to the size I needed for the room. Now I ordered six chairs that I found on line on a sale for less than $50. each and I have a great set for casual dinners and playing games in my media room for a fraction of the cost of expensive sets!

United States on Aug 26, 2021

Claire KClaire K: I installed these on a console stand. They look very sleek and modern which I like, although the very square stand is now wobbly which is odd. Also, one of the legs had two small imperfections on the base. If you were planning on using these more professionally or for more of a particular look, just note they might not be totally flawless (unless I just received a flawed product). Overall I think the legs are very modern and seem to be of pretty good quality and I do like them a lot.

United States on Feb 23, 2021

Bugs Bunny heart-eyesBugs Bunny heart-eyes: When I was looking for a hairpin leg dining table I couldn’t find anything for less than $500+ And nothing in the colour I wanted.
These legs let me make my own, with a tabletop I already had, for so much less.
They’re sturdy, they don’t wobble, and they look beautiful.
I spray painted them with brass metallic paint,(which they took smoothly and perfectly) and they look like they were made to go with my Eiffel chairs. Incredibly happy with my purchase overall.

Installation wise, I used my electric screwdriver (also a cheap amazon purchase) and I swapped out the screws for square headed screws of the same size, because I HATE Phillips head screws generally. I didn’t pre-drill, but I did start off the holes by marking the position where I wanted the kegs to go, then screwing the screws part way in without the legs on. Which made it was easier to get the screws started with the legs in position. My whole project, including spray painting the legs, took less than 2 hours (installation was 20 minutes max).

Canada on Dec 22, 2020

G@dgetG33k: Made a 2" thick live edge Walnut bench as a gift, will buy more of these. These are solidly made and sturdy enough to use as a bench or table. They seemed accurately aligned as well. Suggestions: Mark holes accurately by clamping while marking and use a drill press or drill guide and the correct size bit, especially in hardwood. Use a large drive bit to drive most of the way and finish with a large hand screwdriver to avoid stripping. Too small drill bit and you could strip the head or break the screw, too large and it won't hold especially in softer woods, hitting the end at full power with a drill/driver is also a good way to strip them out. Good Luck!

United States on May 02, 2020